Re: [PATCHv1 00/14] omapdrm: DSI command mode panel support

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1375 bytes --]

Hi!

> > P.S.: I got asked by different people about the status of this
> > patchset, which is required for display support on N9, N950 and
> > Droid 4. It's not just me and Tony, that are interested in this :)
> 
> Ok. If you agree to help with the DSI part in the future, I have no
> problems applying these (after review and testing, of course).
> 
> My worry is not only with complicating Laurent's work towards common DRM
> drivers, but also with the maintenance burden this brings. Keeping DSI
> working in the future may be challenging due to the lack of users and
> (easy to use) boards. I do have a N950 and OMAP4 Blaze Tablet, though,
> so I'm able to test both command and video modes. But getting those boot
> up is not always trivial, especially for the blaze tablet.

Well... Yes, they are challenging to boot, because without working
display, debugging them is hard/impossible. Very few people have
serial cables for those, but at least the N9 is pretty common.

PostmarketOS is interested in using it as a target. I'm interested in
keeping it going. With working display, I'm pretty sure I can prevent
regressions... and there could be even some improvements :-).

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]