* [PATCH 4.9 79/87] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally
[not found] <20171113125615.304035578@linuxfoundation.org>
@ 2017-11-13 12:56 ` Greg Kroah-Hartman
2017-11-13 12:56 ` [PATCH 4.9 80/87] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID Greg Kroah-Hartman
2017-11-13 12:56 ` [PATCH 4.9 81/87] drm/bridge: adv7511: Re-write the i2c address before EDID probing Greg Kroah-Hartman
2 siblings, 0 replies; 3+ messages in thread
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Nhan Nguyen, David Airlie, Greg Kroah-Hartman, dri-devel, stable,
Wolfram Sang, Laurent Pinchart
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <john.stultz@linaro.org>
commit 651e4769ba2a9f20c4b8a823ae2727bf7fa9c9f0 upstream.
In chasing down issues with EDID probing, I found some
duplicated but incomplete logic used to power the chip on and
off.
This patch refactors the adv7511_power_on/off functions, so
they can be used for internal needs.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -325,7 +325,7 @@ static void adv7511_set_link_config(stru
adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
}
-static void adv7511_power_on(struct adv7511 *adv7511)
+static void __adv7511_power_on(struct adv7511 *adv7511)
{
adv7511->current_edid_segment = -1;
@@ -354,6 +354,11 @@ static void adv7511_power_on(struct adv7
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
ADV7511_REG_POWER2_HPD_SRC_MASK,
ADV7511_REG_POWER2_HPD_SRC_NONE);
+}
+
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+ __adv7511_power_on(adv7511);
/*
* Most of the registers are reset during power down or when HPD is low.
@@ -362,21 +367,23 @@ static void adv7511_power_on(struct adv7
if (adv7511->type == ADV7533)
adv7533_dsi_power_on(adv7511);
-
adv7511->powered = true;
}
-static void adv7511_power_off(struct adv7511 *adv7511)
+static void __adv7511_power_off(struct adv7511 *adv7511)
{
/* TODO: setup additional power down modes */
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
ADV7511_POWER_POWER_DOWN,
ADV7511_POWER_POWER_DOWN);
regcache_mark_dirty(adv7511->regmap);
+}
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+ __adv7511_power_off(adv7511);
if (adv7511->type == ADV7533)
adv7533_dsi_power_off(adv7511);
-
adv7511->powered = false;
}
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 4.9 80/87] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
[not found] <20171113125615.304035578@linuxfoundation.org>
2017-11-13 12:56 ` [PATCH 4.9 79/87] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally Greg Kroah-Hartman
@ 2017-11-13 12:56 ` Greg Kroah-Hartman
2017-11-13 12:56 ` [PATCH 4.9 81/87] drm/bridge: adv7511: Re-write the i2c address before EDID probing Greg Kroah-Hartman
2 siblings, 0 replies; 3+ messages in thread
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Nhan Nguyen, David Airlie, Greg Kroah-Hartman, dri-devel, stable,
Wolfram Sang, Laurent Pinchart
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <john.stultz@linaro.org>
commit 4226d9b127cf4758ba0e07931b3f0d59f1b1a50c upstream.
Thus this patch changes the EDID probing logic so that we
re-use the __adv7511_power_on/off() calls instead of duplciating
logic.
This does change behavior slightly as it adds the HPD signal
pulse to the EDID probe path, but Archit has had a patch to
add HPD signal pulse to the EDID probe path before, so this
should address the cases where that helped. Another difference
is that regcache_mark_dirty() is also called in the power off
path once EDID is probed.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -573,24 +573,13 @@ static int adv7511_get_modes(struct adv7
unsigned int count;
/* Reading the EDID only works if the device is powered */
- if (!adv7511->powered) {
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN, 0);
- if (adv7511->i2c_main->irq) {
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
- ADV7511_INT0_EDID_READY);
- regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
- ADV7511_INT1_DDC_ERROR);
- }
- adv7511->current_edid_segment = -1;
- }
+ if (!adv7511->powered)
+ __adv7511_power_on(adv7511);
edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
if (!adv7511->powered)
- regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
- ADV7511_POWER_POWER_DOWN,
- ADV7511_POWER_POWER_DOWN);
+ __adv7511_power_off(adv7511);
kfree(adv7511->edid);
adv7511->edid = edid;
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 4.9 81/87] drm/bridge: adv7511: Re-write the i2c address before EDID probing
[not found] <20171113125615.304035578@linuxfoundation.org>
2017-11-13 12:56 ` [PATCH 4.9 79/87] drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally Greg Kroah-Hartman
2017-11-13 12:56 ` [PATCH 4.9 80/87] drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID Greg Kroah-Hartman
@ 2017-11-13 12:56 ` Greg Kroah-Hartman
2 siblings, 0 replies; 3+ messages in thread
From: Greg Kroah-Hartman @ 2017-11-13 12:56 UTC (permalink / raw)
To: linux-kernel
Cc: Nhan Nguyen, David Airlie, Greg Kroah-Hartman, dri-devel, stable,
Wolfram Sang, Laurent Pinchart
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <john.stultz@linaro.org>
commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream.
I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.
Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.
Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -573,9 +573,17 @@ static int adv7511_get_modes(struct adv7
unsigned int count;
/* Reading the EDID only works if the device is powered */
- if (!adv7511->powered)
+ if (!adv7511->powered) {
+ unsigned int edid_i2c_addr =
+ (adv7511->i2c_main->addr << 1) + 4;
+
__adv7511_power_on(adv7511);
+ /* Reset the EDID_I2C_ADDR register as it might be cleared */
+ regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
+ edid_i2c_addr);
+ }
+
edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
if (!adv7511->powered)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 3+ messages in thread