From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: Re: [PATCH v2] drm/atomic: Use DRM_DEBUG_KMS instead of DRM_DEBUG_ATOMIC in error paths
Date: Fri, 24 Nov 2017 18:13:56 +0200 [thread overview]
Message-ID: <20171124161356.GN10981@intel.com> (raw)
In-Reply-To: <20171115183841.23436-1-ville.syrjala@linux.intel.com>
On Wed, Nov 15, 2017 at 08:38:41PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> DRM_DEBUG_ATOMIC generates a lot of noise that no one normally cares
> about. However error paths everyone cares about, so hiding thea error
> debugs under DRM_DEBUG_ATOMIC is a bad idea. Let's use DRM_DEBUG_KMS
> for those instead.
Actually, one idea that came to my mind right now is that maybe we want
to keep using _ATOMIC with TEST_ONLY, and only use _KMS w/o TEST_ONLY?
>
> v2: Rebase and handle a few new cases
>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com> #v1
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/drm_atomic.c | 64 ++++++++++++++++-----------------
> drivers/gpu/drm/drm_atomic_helper.c | 70 ++++++++++++++++++-------------------
> 2 files changed, 66 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index 37445d50816a..594bdd5c33cb 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -572,8 +572,8 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
> */
>
> if (state->active && !state->enable) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] active without enabled\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] active without enabled\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
>
> @@ -582,15 +582,15 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
> * be able to trigger. */
> if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
> WARN_ON(state->enable && !state->mode_blob)) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled without mode blob\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] enabled without mode blob\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
>
> if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) &&
> WARN_ON(!state->enable && state->mode_blob)) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] disabled with mode blob\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] disabled with mode blob\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
>
> @@ -605,8 +605,8 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
> * pipe.
> */
> if (state->event && !state->active && !crtc->state->active) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requesting event but off\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] requesting event but off\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
>
> @@ -861,10 +861,10 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
>
> /* either *both* CRTC and FB must be set, or neither */
> if (WARN_ON(state->crtc && !state->fb)) {
> - DRM_DEBUG_ATOMIC("CRTC set but no FB\n");
> + DRM_DEBUG_KMS("CRTC set but no FB\n");
> return -EINVAL;
> } else if (WARN_ON(state->fb && !state->crtc)) {
> - DRM_DEBUG_ATOMIC("FB set but no CRTC\n");
> + DRM_DEBUG_KMS("FB set but no CRTC\n");
> return -EINVAL;
> }
>
> @@ -874,7 +874,7 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
>
> /* Check whether this plane is usable on this CRTC */
> if (!(plane->possible_crtcs & drm_crtc_mask(state->crtc))) {
> - DRM_DEBUG_ATOMIC("Invalid crtc for plane\n");
> + DRM_DEBUG_KMS("Invalid crtc for plane\n");
> return -EINVAL;
> }
>
> @@ -882,9 +882,9 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
> ret = drm_plane_check_pixel_format(plane, state->fb->format->format);
> if (ret) {
> struct drm_format_name_buf format_name;
> - DRM_DEBUG_ATOMIC("Invalid pixel format %s\n",
> - drm_get_format_name(state->fb->format->format,
> - &format_name));
> + DRM_DEBUG_KMS("Invalid pixel format %s\n",
> + drm_get_format_name(state->fb->format->format,
> + &format_name));
> return ret;
> }
>
> @@ -893,9 +893,9 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
> state->crtc_x > INT_MAX - (int32_t) state->crtc_w ||
> state->crtc_h > INT_MAX ||
> state->crtc_y > INT_MAX - (int32_t) state->crtc_h) {
> - DRM_DEBUG_ATOMIC("Invalid CRTC coordinates %ux%u+%d+%d\n",
> - state->crtc_w, state->crtc_h,
> - state->crtc_x, state->crtc_y);
> + DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
> + state->crtc_w, state->crtc_h,
> + state->crtc_x, state->crtc_y);
> return -ERANGE;
> }
>
> @@ -907,19 +907,19 @@ static int drm_atomic_plane_check(struct drm_plane *plane,
> state->src_x > fb_width - state->src_w ||
> state->src_h > fb_height ||
> state->src_y > fb_height - state->src_h) {
> - DRM_DEBUG_ATOMIC("Invalid source coordinates "
> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
> - state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
> - state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
> - state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
> - state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10,
> - state->fb->width, state->fb->height);
> + DRM_DEBUG_KMS("Invalid source coordinates "
> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
> + state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
> + state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
> + state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
> + state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10,
> + state->fb->width, state->fb->height);
> return -ENOSPC;
> }
>
> if (plane_switching_crtc(state->state, plane, state)) {
> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] switching CRTC directly\n",
> - plane->base.id, plane->name);
> + DRM_DEBUG_KMS("[PLANE:%d:%s] switching CRTC directly\n",
> + plane->base.id, plane->name);
> return -EINVAL;
> }
>
> @@ -1596,8 +1596,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
> for_each_new_plane_in_state(state, plane, plane_state, i) {
> ret = drm_atomic_plane_check(plane, plane_state);
> if (ret) {
> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic core check failed\n",
> - plane->base.id, plane->name);
> + DRM_DEBUG_KMS("[PLANE:%d:%s] atomic core check failed\n",
> + plane->base.id, plane->name);
> return ret;
> }
> }
> @@ -1605,8 +1605,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
> for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
> ret = drm_atomic_crtc_check(crtc, crtc_state);
> if (ret) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic core check failed\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] atomic core check failed\n",
> + crtc->base.id, crtc->name);
> return ret;
> }
> }
> @@ -1620,8 +1620,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
> if (!state->allow_modeset) {
> for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
> if (drm_atomic_crtc_needs_modeset(crtc_state)) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] requires full modeset\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] requires full modeset\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
> }
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index ced1ac8e68a0..8625b181f6b6 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -121,9 +121,9 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
>
> if (new_encoder) {
> if (encoder_mask & (1 << drm_encoder_index(new_encoder))) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] on [CONNECTOR:%d:%s] already assigned\n",
> - new_encoder->base.id, new_encoder->name,
> - connector->base.id, connector->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] on [CONNECTOR:%d:%s] already assigned\n",
> + new_encoder->base.id, new_encoder->name,
> + connector->base.id, connector->name);
>
> return -EINVAL;
> }
> @@ -158,11 +158,11 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
> continue;
>
> if (!disable_conflicting_encoders) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] in use on [CRTC:%d:%s] by [CONNECTOR:%d:%s]\n",
> - encoder->base.id, encoder->name,
> - connector->state->crtc->base.id,
> - connector->state->crtc->name,
> - connector->base.id, connector->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] in use on [CRTC:%d:%s] by [CONNECTOR:%d:%s]\n",
> + encoder->base.id, encoder->name,
> + connector->state->crtc->base.id,
> + connector->state->crtc->name,
> + connector->base.id, connector->name);
> ret = -EINVAL;
> goto out;
> }
> @@ -317,18 +317,16 @@ update_connector_routing(struct drm_atomic_state *state,
> new_encoder = drm_atomic_helper_best_encoder(connector);
>
> if (!new_encoder) {
> - DRM_DEBUG_ATOMIC("No suitable encoder found for [CONNECTOR:%d:%s]\n",
> - connector->base.id,
> - connector->name);
> + DRM_DEBUG_KMS("No suitable encoder found for [CONNECTOR:%d:%s]\n",
> + connector->base.id, connector->name);
> return -EINVAL;
> }
>
> if (!drm_encoder_crtc_ok(new_encoder, new_connector_state->crtc)) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] incompatible with [CRTC:%d:%s]\n",
> - new_encoder->base.id,
> - new_encoder->name,
> - new_connector_state->crtc->base.id,
> - new_connector_state->crtc->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] incompatible with [CRTC:%d:%s]\n",
> + new_encoder->base.id, new_encoder->name,
> + new_connector_state->crtc->base.id,
> + new_connector_state->crtc->name);
> return -EINVAL;
> }
>
> @@ -404,7 +402,7 @@ mode_fixup(struct drm_atomic_state *state)
> ret = drm_bridge_mode_fixup(encoder->bridge, &new_crtc_state->mode,
> &new_crtc_state->adjusted_mode);
> if (!ret) {
> - DRM_DEBUG_ATOMIC("Bridge fixup failed\n");
> + DRM_DEBUG_KMS("Bridge fixup failed\n");
> return -EINVAL;
> }
>
> @@ -412,16 +410,16 @@ mode_fixup(struct drm_atomic_state *state)
> ret = funcs->atomic_check(encoder, new_crtc_state,
> new_conn_state);
> if (ret) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] check failed\n",
> - encoder->base.id, encoder->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] check failed\n",
> + encoder->base.id, encoder->name);
> return ret;
> }
> } else if (funcs && funcs->mode_fixup) {
> ret = funcs->mode_fixup(encoder, &new_crtc_state->mode,
> &new_crtc_state->adjusted_mode);
> if (!ret) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] fixup failed\n",
> - encoder->base.id, encoder->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] fixup failed\n",
> + encoder->base.id, encoder->name);
> return -EINVAL;
> }
> }
> @@ -444,8 +442,8 @@ mode_fixup(struct drm_atomic_state *state)
> ret = funcs->mode_fixup(crtc, &new_crtc_state->mode,
> &new_crtc_state->adjusted_mode);
> if (!ret) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] fixup failed\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] fixup failed\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
> }
> @@ -462,21 +460,21 @@ static enum drm_mode_status mode_valid_path(struct drm_connector *connector,
>
> ret = drm_encoder_mode_valid(encoder, mode);
> if (ret != MODE_OK) {
> - DRM_DEBUG_ATOMIC("[ENCODER:%d:%s] mode_valid() failed\n",
> - encoder->base.id, encoder->name);
> + DRM_DEBUG_KMS("[ENCODER:%d:%s] mode_valid() failed\n",
> + encoder->base.id, encoder->name);
> return ret;
> }
>
> ret = drm_bridge_mode_valid(encoder->bridge, mode);
> if (ret != MODE_OK) {
> - DRM_DEBUG_ATOMIC("[BRIDGE] mode_valid() failed\n");
> + DRM_DEBUG_KMS("[BRIDGE] mode_valid() failed\n");
> return ret;
> }
>
> ret = drm_crtc_mode_valid(crtc, mode);
> if (ret != MODE_OK) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] mode_valid() failed\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] mode_valid() failed\n",
> + crtc->base.id, crtc->name);
> return ret;
> }
>
> @@ -605,8 +603,8 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
> }
>
> if (new_crtc_state->enable != has_connectors) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] enabled/connectors mismatch\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] enabled/connectors mismatch\n",
> + crtc->base.id, crtc->name);
>
> return -EINVAL;
> }
> @@ -735,8 +733,8 @@ drm_atomic_helper_check_planes(struct drm_device *dev,
>
> ret = funcs->atomic_check(plane, new_plane_state);
> if (ret) {
> - DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic driver check failed\n",
> - plane->base.id, plane->name);
> + DRM_DEBUG_KMS("[PLANE:%d:%s] atomic driver check failed\n",
> + plane->base.id, plane->name);
> return ret;
> }
> }
> @@ -751,8 +749,8 @@ drm_atomic_helper_check_planes(struct drm_device *dev,
>
> ret = funcs->atomic_check(crtc, new_crtc_state);
> if (ret) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic driver check failed\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] atomic driver check failed\n",
> + crtc->base.id, crtc->name);
> return ret;
> }
> }
> @@ -3098,8 +3096,8 @@ static int page_flip_common(struct drm_atomic_state *state,
> /* Make sure we don't accidentally do a full modeset. */
> state->allow_modeset = false;
> if (!crtc_state->active) {
> - DRM_DEBUG_ATOMIC("[CRTC:%d:%s] disabled, rejecting legacy flip\n",
> - crtc->base.id, crtc->name);
> + DRM_DEBUG_KMS("[CRTC:%d:%s] disabled, rejecting legacy flip\n",
> + crtc->base.id, crtc->name);
> return -EINVAL;
> }
>
> --
> 2.13.6
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-11-24 16:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-13 15:13 [PATCH] drm/atomic: Use DRM_DEBUG_KMS instead of DRM_DEBUG_ATOMIC in error paths ville.syrjala
2016-05-16 7:47 ` Jani Nikula
2016-05-16 12:21 ` Emil Velikov
2017-11-15 18:38 ` [PATCH v2] " Ville Syrjala
2017-11-24 16:13 ` Ville Syrjälä [this message]
2017-11-27 10:14 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171124161356.GN10981@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox