dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: "José Roberto de Souza" <jose.souza@intel.com>,
	"Dhinakaran Pandiyan" <dhinakaran.pandiyan@intel.com>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v2 08/10] drm/i915/psr: Cache sink synchronization latency
Date: Mon, 26 Mar 2018 18:06:32 -0700	[thread overview]
Message-ID: <20180327010634.15917-8-jose.souza@intel.com> (raw)
In-Reply-To: <20180327010634.15917-1-jose.souza@intel.com>

This value do not change overtime so better cache it than
fetch it every PSR enable.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h  |  1 +
 drivers/gpu/drm/i915/intel_psr.c | 28 ++++++++++++++++------------
 2 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 46cae097201c..5373b171bb96 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -608,6 +608,7 @@ struct i915_psr {
 	bool alpm;
 	bool has_hw_tracking;
 	bool psr2_enabled;
+	u8 sink_sync_latency;
 
 	void (*enable_source)(struct intel_dp *,
 			      const struct intel_crtc_state *);
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index bec455e28943..d079cf0b034c 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -122,6 +122,18 @@ static bool intel_dp_get_alpm_status(struct intel_dp *intel_dp)
 	return alpm_caps & DP_ALPM_CAP;
 }
 
+static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp)
+{
+	u8 val = 0;
+
+	if (drm_dp_dpcd_readb(&intel_dp->aux,
+			      DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1)
+		val &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
+	else
+		DRM_ERROR("Unable to get sink synchronization latency\n");
+	return val;
+}
+
 void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv =
@@ -158,6 +170,8 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
 				intel_dp_get_alpm_status(intel_dp);
+			dev_priv->psr.sink_sync_latency =
+				intel_dp_get_sink_sync_latency(intel_dp);
 		}
 	}
 }
@@ -379,10 +393,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	 * with the 5 or 6 idle patterns.
 	 */
 	uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
-	uint32_t val;
-	uint8_t sink_latency;
-
-	val = idle_frames << EDP_PSR2_IDLE_FRAME_SHIFT;
+	u32 val = idle_frames << EDP_PSR2_IDLE_FRAME_SHIFT;
 
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
@@ -392,14 +403,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
 	}
 
-	if (drm_dp_dpcd_readb(&intel_dp->aux,
-				DP_SYNCHRONIZATION_LATENCY_IN_SINK,
-				&sink_latency) == 1) {
-		sink_latency &= DP_MAX_RESYNC_FRAME_COUNT_MASK;
-	} else {
-		sink_latency = 0;
-	}
-	val |= EDP_PSR2_FRAME_BEFORE_SU(sink_latency + 1);
+	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
 
 	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
 		val |= EDP_PSR2_TP2_TIME_2500;
-- 
2.16.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2018-03-27  1:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-27  1:06 [PATCH v2 01/10] drm: Add DP PSR2 sink enable bit José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 02/10] drm: Add DP last received PSR SDP VSC register and bits José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 03/10] drm/i915/psr: Nuke aux frame sync José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 04/10] drm/i915/psr: Tie PSR2 support to Y coordinate requirement José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 05/10] drm/i915/psr/cnl: Enable Y-coordinate support in source José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 06/10] drm/i915/psr: Do not override PSR2 sink support José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 07/10] drm/i915/psr: Use PSR2 macro for PSR2 José Roberto de Souza
2018-03-27  1:06 ` José Roberto de Souza [this message]
2018-03-27  1:06 ` [PATCH v2 09/10] drm/i915/psr: Set DPCD PSR2 enable bit when needed José Roberto de Souza
2018-03-27  1:06 ` [PATCH v2 10/10] drm/i915/debugfs: Print sink PSR status José Roberto de Souza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180327010634.15917-8-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox