From: Sean Paul <sean@poorly.run>
To: spanda@codeaurora.org
Cc: dri-devel@lists.freedesktop.org,
Sean Paul <seanpaul@chromium.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Sean Paul <sean@poorly.run>
Subject: Re: [PATCH v3 7/7] drm/bridge: ti-sn65dsi86: Add mystery delay to enable()
Date: Thu, 23 Aug 2018 10:25:53 -0400 [thread overview]
Message-ID: <20180823142553.GC45089@art_vandelay> (raw)
In-Reply-To: <20180814140145.GB224885@art_vandelay>
On Tue, Aug 14, 2018 at 10:01:45AM -0400, Sean Paul wrote:
> On Tue, Aug 14, 2018 at 10:00:33AM -0400, Sean Paul wrote:
> > On Tue, Aug 14, 2018 at 04:59:31PM +0530, spanda@codeaurora.org wrote:
> > > On 2018-08-14 03:00, Sean Paul wrote:
> > > > From: Sean Paul <seanpaul@chromium.org>
> > > >
> > > > This patch adds a 70ms mystery delay to the bridge driver in enable.
> > > > By experimentation, it seems like it can go anywhere up until we
> > > > initiate semi-auto link training. If we don't have the delay, link
> > > > training fails.
> > > >
> > > > I tried to root cause this as best I could, but neither the datasheet
> > > > for the panel nor the bridge mention a delay of this magnitude in their
> > > > timing requirements. So for now, add the mystery delay until someone
> > > > figures out a better fix.
> > > >
> > > > Changes in v3:
> > > > - Added to the set
> > > >
> > > > Cc: Sandeep Panda <spanda@codeaurora.org>
> > > > Signed-off-by: Sean Paul <seanpaul@chromium.org>
> > > > ---
> > > > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 12 ++++++++++++
> > > > 1 file changed, 12 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > > b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > > index d3e27e52ea759..f8a931cf3665e 100644
> > > > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > > @@ -458,6 +458,18 @@ static void ti_sn_bridge_enable(struct drm_bridge
> > > > *bridge)
> > > > unsigned int val;
> > > > int ret;
> > > >
> > > > + /*
> > > > + * FIXME:
> > > > + * This 70ms was found necessary by experimentation. If it's not
> > > > + * present, link training fails. It seems like it can go anywhere from
> > > > + * pre_enable() up to semi-auto link training initiation below.
> > > > + *
> > > > + * Neither the datasheet for the bridge nor the panel tested mention a
> > > > + * delay of this magnitude in the timing requirements. So for now, add
> > > > + * the mystery delay until someone figures out a better fix.
> > > > + */
> > >
> > > Is this newly found issue? Specific to any board config?
> >
> > It's specific to cheza.
>
> Well, I suppose I shouldn't say that since I've not tried the bridge on another
> board. I should say, it reproduces on cheza.
Ping. Sandeep: any more feedback?
Sean
>
> Sean
>
> > This was found with swboyd changed the panel regulator
> > from always-on/boot-on to toggle.
> >
> > I've pushed the tag "mtp-testing-0813" to dpu-staging so you can play around
> > with it. Without this delay, link training fails.
> >
> > Sean
> >
> > >
> > > > + msleep(70);
> > > > +
> > > > /* DSI_A lane config */
> > > > val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
> > > > regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
> >
> > --
> > Sean Paul, Software Engineer, Google / Chromium OS
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-08-23 14:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 21:30 [PATCH v3 0/7] drm/bridge: ti-sn65dsi86: Fix bridge for non always-on regulators Sean Paul
2018-08-13 21:30 ` [PATCH v3 1/7] drm/panel: simple: tv123wam: Add unprepare delay Sean Paul
2018-08-14 10:40 ` spanda
2018-08-14 17:55 ` Sean Paul
2018-08-13 21:30 ` [PATCH v3 2/7] drm/bridge: ti-sn65dsi86: Fixup register names Sean Paul
2018-08-14 10:50 ` spanda
2018-08-13 21:30 ` [PATCH v3 3/7] drm/bridge: ti-sn65dsi86: Implement AUX channel Sean Paul
2018-08-14 11:06 ` spanda
2018-08-13 21:30 ` [PATCH v3 4/7] drm/bridge: ti-sn65dsi86: Move panel_prepare() to pre_enable() Sean Paul
2018-08-14 11:09 ` spanda
2018-08-13 21:30 ` [PATCH v3 5/7] drm/bridge: ti-sn65dsi86: Poll for DP PLL Lock Sean Paul
2018-08-14 11:10 ` spanda
2018-08-13 21:30 ` [PATCH v3 6/7] drm/bridge: ti-sn65dsi86: Poll for training complete Sean Paul
2018-08-14 11:26 ` spanda
2018-08-14 18:15 ` Sean Paul
2018-08-13 21:30 ` [PATCH v3 7/7] drm/bridge: ti-sn65dsi86: Add mystery delay to enable() Sean Paul
2018-08-14 11:29 ` spanda
2018-08-14 14:00 ` Sean Paul
2018-08-14 14:01 ` Sean Paul
2018-08-23 14:25 ` Sean Paul [this message]
2018-08-26 5:44 ` spanda
2018-08-26 11:37 ` Sean Paul
2018-08-27 2:10 ` spanda
2018-08-27 15:28 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180823142553.GC45089@art_vandelay \
--to=sean@poorly.run \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=seanpaul@chromium.org \
--cc=spanda@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox