dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Lyude Paul <lyude-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: "David Airlie" <airlied-cv59FeDIM0c@public.gmane.org>,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	"Ben Skeggs" <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
	"Ville Syrjälä"
	<ville.syrjala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect()
Date: Thu, 30 Aug 2018 13:16:28 -0400	[thread overview]
Message-ID: <20180830171628.23999-1-lyude@redhat.com> (raw)

It looks like that when we moved over to using
drm_connector_for_each_possible_encoder() in nouveau, that one rather
important part of this function got dropped by accident:

	/*          Right   v   here */
	for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) {
		int id = connector->encoder_ids[i];
		if (id == 0)
			break;

Since it's rather difficult to notice: the conditional in this loop is
actually:

	nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER

Meaning that all early breaks result in nv_encoder keeping it's value,
otherwise nv_encoder = NULL. Ugh.

Since this got dropped, nouveau_connector_ddc_detect() now returns an
encoder for every single connector, regardless of whether or not it's
detected:

    [ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DP-2

So: fix this to ensure we only return an encoder if we actually found
one, and clean up the rest of the function while we're at it since it's
nearly impossible to read properly.

Changes since v1:
- Don't skip ddc probing for LVDS if we can't switch DDC through
  vga-switcheroo, just do the DDC probing without calling
  vga_switcheroo_lock_ddc() - skeggsb

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: ddba766dd07e ("drm/nouveau: Use drm_connector_for_each_possible_encoder()")
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 49 ++++++++++++---------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 71c3bd8ff9f8..461111aaedc4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -414,9 +414,10 @@ nouveau_connector_ddc_detect(struct drm_connector *connector)
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device);
-	struct nouveau_encoder *nv_encoder = NULL;
+	struct nouveau_encoder *nv_encoder = NULL, *found = NULL;
 	struct drm_encoder *encoder;
-	int i, panel = -ENODEV;
+	int i, ret, panel = -ENODEV;
+	bool switcheroo_ddc = false;
 
 	/* eDP panels need powering on by us (if the VBIOS doesn't default it
 	 * to on) before doing any AUX channel transactions.  LVDS panel power
@@ -433,37 +434,43 @@ nouveau_connector_ddc_detect(struct drm_connector *connector)
 	drm_connector_for_each_possible_encoder(connector, encoder, i) {
 		nv_encoder = nouveau_encoder(encoder);
 
-		if (nv_encoder->dcb->type == DCB_OUTPUT_DP) {
-			int ret = nouveau_dp_detect(nv_encoder);
+		switch (nv_encoder->dcb->type) {
+		case DCB_OUTPUT_DP:
+			ret = nouveau_dp_detect(nv_encoder);
 			if (ret == NOUVEAU_DP_MST)
 				return NULL;
-			if (ret == NOUVEAU_DP_SST)
-				break;
-		} else
-		if ((vga_switcheroo_handler_flags() &
-		     VGA_SWITCHEROO_CAN_SWITCH_DDC) &&
-		    nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
-		    nv_encoder->i2c) {
-			int ret;
-			vga_switcheroo_lock_ddc(dev->pdev);
-			ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50);
-			vga_switcheroo_unlock_ddc(dev->pdev);
-			if (ret)
+			else if (ret == NOUVEAU_DP_SST)
+				found = nv_encoder;
+
+			break;
+		case DCB_OUTPUT_LVDS:
+			switcheroo_ddc = !!(vga_switcheroo_handler_flags() &
+					    VGA_SWITCHEROO_CAN_SWITCH_DDC);
+		/* fall-through */
+		default:
+			if (!nv_encoder->i2c)
 				break;
-		} else
-		if (nv_encoder->i2c) {
+
+			if (switcheroo_ddc)
+				vga_switcheroo_lock_ddc(dev->pdev);
 			if (nvkm_probe_i2c(nv_encoder->i2c, 0x50))
-				break;
+				found = nv_encoder;
+			if (switcheroo_ddc)
+				vga_switcheroo_unlock_ddc(dev->pdev);
+
+			break;
 		}
+		if (found)
+			break;
 	}
 
 	/* eDP panel not detected, restore panel power GPIO to previous
 	 * state to avoid confusing the SOR for other output types.
 	 */
-	if (!nv_encoder && panel == 0)
+	if (!found && panel == 0)
 		nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel);
 
-	return nv_encoder;
+	return found;
 }
 
 static struct nouveau_encoder *
-- 
2.17.1

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

             reply	other threads:[~2018-08-30 17:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-30 17:16 Lyude Paul [this message]
2018-08-30 17:36 ` [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect() Ville Syrjälä
     [not found]   ` <20180830173603.GP5565-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2018-08-30 17:37     ` Lyude Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180830171628.23999-1-lyude@redhat.com \
    --to=lyude-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=airlied-cv59FeDIM0c@public.gmane.org \
    --cc=bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=ville.syrjala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).