From: "Ville Syrjälä" <ville.syrjala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Lyude Paul <lyude-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
intel-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
Ben Skeggs <bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH 1/2] drm/nouveau: Disable atomic support on a per-device basis
Date: Fri, 14 Sep 2018 18:04:19 +0300 [thread overview]
Message-ID: <20180914150419.GI5565@intel.com> (raw)
In-Reply-To: <9df77326cf0ed944e52091230df129a06872696d.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
On Thu, Sep 13, 2018 at 05:02:05PM -0400, Lyude Paul wrote:
> Hm, one nitpick here. Since /sys/kernel/debug/dri/*/state creation depends on
> the driver supporting atomic, maybe it would be good to make it so that we set
> DRIVER_ATOMIC in the driver_stub structure, then disable it per-device depending
> on the nouveau_atomic setting + hw support. That way we can always have the
> state debugfs file while maintaining nouveau's current behavior with exposing
> atomic ioctls. Assuming that wouldn't have any unintended side-effects of course
I'm not sure why there are three driver structs in nouveau.
Maybe someone can just nuke two of them?
>
> On Thu, 2018-09-13 at 19:31 +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > We now have per-device driver_features, so let's use that
> > to disable atomic only for pre-nv50.
> >
> > Cc: Ben Skeggs <bskeggs@redhat.com>
> > Cc: Lyude Paul <lyude@redhat.com>
> > Cc: nouveau@lists.freedesktop.org
> > Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/nouveau/dispnv04/disp.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/nouveau/dispnv04/disp.c
> > b/drivers/gpu/drm/nouveau/dispnv04/disp.c
> > index 70dce544984e..670535a68d3b 100644
> > --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c
> > +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c
> > @@ -56,7 +56,7 @@ nv04_display_create(struct drm_device *dev)
> > nouveau_display(dev)->fini = nv04_display_fini;
> >
> > /* Pre-nv50 doesn't support atomic, so don't expose the ioctls */
> > - dev->driver->driver_features &= ~DRIVER_ATOMIC;
> > + dev->driver_features &= ~DRIVER_ATOMIC;
> >
> > nouveau_hw_save_vga_fonts(dev, 1);
> >
--
Ville Syrjälä
Intel
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2018-09-14 15:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 16:31 [PATCH 1/2] drm/nouveau: Disable atomic support on a per-device basis Ville Syrjala
2018-09-13 16:31 ` [PATCH 2/2] drm/amdgpu: Use per-device driver_features to disable atomic Ville Syrjala
2018-09-13 16:38 ` Michel Dänzer
2018-09-13 16:40 ` Alex Deucher
2018-09-13 18:29 ` Ville Syrjälä
2018-09-20 18:55 ` Harry Wentland
[not found] ` <20180913163147.27900-1-ville.syrjala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2018-09-13 21:02 ` [PATCH 1/2] drm/nouveau: Disable atomic support on a per-device basis Lyude Paul
2018-09-14 8:11 ` Daniel Vetter
2018-09-17 17:34 ` Lyude Paul
[not found] ` <9df77326cf0ed944e52091230df129a06872696d.camel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2018-09-14 15:04 ` Ville Syrjälä [this message]
2018-09-14 7:45 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180914150419.GI5565@intel.com \
--to=ville.syrjala-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=bskeggs-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=intel-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=lyude-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).