[PATCH v6 1/2] drm: Add connector property to limit max bpc

* [PATCH v6 1/2] drm: Add connector property to limit max bpc
@ 2018-09-18  4:52 Radhakrishna Sripada
  2018-09-18  4:52 ` [PATCH v6 2/2] drm/i915: Allow "max bpc" property to limit pipe_bpp Radhakrishna Sripada
  2018-09-18 16:49 ` [PATCH v6 1/2] drm: Add connector property to limit max bpc Ville Syrjälä
  0 siblings, 2 replies; 3+ messages in thread
From: Radhakrishna Sripada @ 2018-09-18  4:52 UTC (permalink / raw)
  To: intel-gfx
  Cc: Stanislav Lisovskiy, Radhakrishna Sripada, Daniel Vetter,
	Kishore Kadiyala, Manasi Navare, dri-devel, Rodrigo Vivi

At times 12bpc HDMI cannot be driven due to faulty cables, dongles
level shifters etc. To workaround them we may need to drive the output
at a lower bpc. Currently the user space does not have a way to limit
the bpc. The default bpc to be programmed is decided by the driver and
is run against connector limitations.

Creating a new connector property "max bpc" in order to limit the bpc.
xrandr can make use of this connector property to make sure that bpc does
not exceed the configured value. This property can be used by userspace to
set the bpc.

V2: Initialize max_bpc to satisfy kms_properties
V3: Move the property to drm_connector
V4: Split drm and i915 components(Ville)
V5: Make the property per connector(Ville)
V6: Compare the requested bpc to connector bpc(Daniel)
    Move the attach_property function to core(Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kishore Kadiyala <kishore.kadiyala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
---
 drivers/gpu/drm/drm_atomic.c        | 24 ++++++++++++++++++++++++
 drivers/gpu/drm/drm_atomic_helper.c |  4 ++++
 drivers/gpu/drm/drm_atomic_uapi.c   |  4 ++++
 drivers/gpu/drm/drm_connector.c     | 34 ++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h         | 20 ++++++++++++++++++++
 5 files changed, 86 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 7ada75919756..fa9996deb132 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -390,6 +390,7 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
 {
 	struct drm_crtc_state *crtc_state;
 	struct drm_writeback_job *writeback_job = state->writeback_job;
+	struct drm_display_info *info = &connector->display_info;
 
 	if ((connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) || !writeback_job)
 		return 0;
@@ -400,6 +401,29 @@ static int drm_atomic_connector_check(struct drm_connector *connector,
 		return -EINVAL;
 	}
 
+	if (connector->max_bpc_property) {
+		if (info->bpc != 0 && info->bpc < state->max_requested_bpc) {
+			/* Don't use an invalid EDID bpc value */
+			DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] Clamping requested"
+					 " display bpp (was %d) to EDID reported"
+					 "max of %d\n", connector->base.id,
+					 connector->name,
+					 state->max_requested_bpc, info->bpc);
+			state->max_bpc = info->bpc;
+		} else if (info->bpc != 0) {
+			state->max_bpc = state->max_requested_bpc;
+		} else {
+			/* Clamp bpc to 8 on screens witout EDID 1.4 */
+			DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] Clamping requested"
+					 " display bpp (was %d) to default limit"
+					 " of 24\n", connector->base.id,
+					 connector->name, state->max_requested_bpc);
+			state->max_bpc = 8;
+		}
+	} else {
+		state->max_bpc = info->bpc ? info->bpc : 8;
+	}
+
 	if (state->crtc)
 		crtc_state = drm_atomic_get_existing_crtc_state(state->state,
 								state->crtc);
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 3cf1aa132778..d9ce8077fb6a 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -639,6 +639,10 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
 			if (old_connector_state->link_status !=
 			    new_connector_state->link_status)
 				new_crtc_state->connectors_changed = true;
+
+			if (old_connector_state->max_requested_bpc !=
+			    new_connector_state->max_requested_bpc)
+				new_crtc_state->connectors_changed = true;
 		}
 
 		if (funcs->atomic_check)
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index d5b7f315098c..86ac33922b09 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -740,6 +740,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
 
 		return set_out_fence_for_connector(state->state, connector,
 						   fence_ptr);
+	} else if (property == connector->max_bpc_property) {
+		state->max_requested_bpc = val;
 	} else if (connector->funcs->atomic_set_property) {
 		return connector->funcs->atomic_set_property(connector,
 				state, property, val);
@@ -804,6 +806,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
 		*val = 0;
 	} else if (property == config->writeback_out_fence_ptr_property) {
 		*val = 0;
+	} else if (property == connector->max_bpc_property) {
+		*val = state->max_requested_bpc;
 	} else if (connector->funcs->atomic_get_property) {
 		return connector->funcs->atomic_get_property(connector,
 				state, property, val);
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 1e40e5decbe9..06ad59222e03 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1583,6 +1583,40 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 EXPORT_SYMBOL(drm_connector_set_link_status_property);
 
 /**
+ * drm_connector_attach_max_bpc_property - attach "max bpc" property
+ * @connector: connector to attach max bpc property on.
+ * @min: The minimum bit depth supported by the connector.
+ * @max: The maximum bit depth supported by the connector.
+ *
+ * This is used to add support for limiting the bit depth on a connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_attach_max_bpc_property(struct drm_connector *connector, int
+					  min, int max)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop;
+
+	prop = connector->max_bpc_property;
+	if (prop == NULL) {
+		prop = drm_property_create_range(dev, 0, "max bpc", min, max);
+		if (!prop)
+			return -ENOMEM;
+
+		connector->max_bpc_property = prop;
+	}
+
+	drm_object_attach_property(&connector->base, prop, max);
+	connector->state->max_requested_bpc = max;
+
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_max_bpc_property);
+
+/**
  * drm_connector_init_panel_orientation_property -
  *	initialize the connecters panel_orientation property
  * @connector: connector for which to init the panel-orientation property.
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 91a877fa00cb..d9c60fde5372 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -461,6 +461,18 @@ struct drm_connector_state {
 	 * drm_writeback_signal_completion()
 	 */
 	struct drm_writeback_job *writeback_job;
+
+	/**
+	 * @max_requested_bpc: Connector property to limit the maximum bit
+	 * depth of the pixels.
+	 */
+	unsigned int max_requested_bpc;
+
+	/**
+	 * @max_bpc: Connector max_bpc based on the requested max_bpc property
+	 * and the connector bpc limitations obtained from edid.
+	 */
+	unsigned int max_bpc;
 };
 
 /**
@@ -924,6 +936,12 @@ struct drm_connector {
 	 */
 	struct drm_property_blob *path_blob_ptr;
 
+	/**
+	 * @max_bpc_property: Default connector property for the max bpc to be
+	 * driven out of the connector.
+	 */
+	struct drm_property *max_bpc_property;
+
 #define DRM_CONNECTOR_POLL_HPD (1 << 0)
 #define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
 #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
@@ -1201,6 +1219,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
 					    uint64_t link_status);
 int drm_connector_init_panel_orientation_property(
 	struct drm_connector *connector, int width, int height);
+int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
+					  int min, int max);
 
 /**
  * struct drm_tile_group - Tile group metadata
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 3+ messages in thread