dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Hans Verkuil <hansverk@cisco.com>
Cc: intel-gfx@lists.freedesktop.org,
	Thierry Reding <thierry.reding@gmail.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org
Subject: Re: [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe
Date: Fri, 21 Sep 2018 16:53:14 +0300	[thread overview]
Message-ID: <20180921135314.GV5565@intel.com> (raw)
In-Reply-To: <689d116d-8ac1-a6dc-8857-cb8f9c6e389b@cisco.com>

On Fri, Sep 21, 2018 at 10:28:09AM +0200, Hans Verkuil wrote:
> On 09/20/18 20:51, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Add the code to deal with the MPEG source infoframe.
> > 
> > Blindly typed from the spec, and totally untested.
> 
> I'm not sure this patch should be added at all. The CTA-861-G spec (section 6.7)
> says that the implementation of this infoframe is not recommended due to unresolved
> issues.
> 
> I don't think I've ever seen it either.
> 
> It obviously doesn't hurt to have this code, but I prefer to wait until there
> are devices that actively set/use this infoframe.

Sure. I'm totally fine with leaving it out. Just figured I'd send it out
in case anyone has some use for it.

> 
> Regards,
> 
> 	Hans
> 
> > 
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Hans Verkuil <hans.verkuil@cisco.com>
> > Cc: linux-media@vger.kernel.org
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/video/hdmi.c | 229 +++++++++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/hdmi.h |  27 ++++++
> >  2 files changed, 256 insertions(+)
> > 
> > diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> > index 9507f668a569..3d24c7746c51 100644
> > --- a/drivers/video/hdmi.c
> > +++ b/drivers/video/hdmi.c
> > @@ -706,6 +706,131 @@ hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
> >  	return hdmi_vendor_any_infoframe_pack_only(frame, buffer, size);
> >  }
> >  
> > +/**
> > + * hdmi_mpeg_source_infoframe_init() - initialize an HDMI MPEG Source infoframe
> > + * @frame: HDMI MPEG Source infoframe
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +int hdmi_mpeg_source_infoframe_init(struct hdmi_mpeg_source_infoframe *frame)
> > +{
> > +	memset(frame, 0, sizeof(*frame));
> > +
> > +	frame->type = HDMI_INFOFRAME_TYPE_MPEG_SOURCE;
> > +	frame->version = 1;
> > +	frame->length = HDMI_MPEG_SOURCE_INFOFRAME_SIZE;
> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_init);
> > +
> > +static int hdmi_mpeg_source_infoframe_check_only(const struct hdmi_mpeg_source_infoframe *frame)
> > +{
> > +	if (frame->type != HDMI_INFOFRAME_TYPE_MPEG_SOURCE ||
> > +	    frame->version != 1 ||
> > +	    frame->length != HDMI_MPEG_SOURCE_INFOFRAME_SIZE)
> > +		return -EINVAL;
> > +
> > +	return 0;
> > +}
> > +
> > +/**
> > + * hdmi_mpeg_source_infoframe_check() - Check and check a HDMI MPEG Source infoframe
> > + * @frame: HDMI MPEG Source infoframe
> > + *
> > + * Validates that the infoframe is consistent and updates derived fields
> > + * (eg. length) based on other fields.
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame)
> > +{
> > +	return hdmi_mpeg_source_infoframe_check_only(frame);
> > +}
> > +EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_check);
> > +
> > +/**
> > + * hdmi_mpeg_source_infoframe_pack_only() - write HDMI MPEG Source infoframe to binary buffer
> > + * @frame: HDMI MPEG Source infoframe
> > + * @buffer: destination buffer
> > + * @size: size of buffer
> > + *
> > + * Packs the information contained in the @frame structure into a binary
> > + * representation that can be written into the corresponding controller
> > + * registers. Also computes the checksum as required by section 5.3.5 of
> > + * the HDMI 1.4 specification.
> > + *
> > + * Returns the number of bytes packed into the binary buffer or a negative
> > + * error code on failure.
> > + */
> > +ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infoframe *frame,
> > +					     void *buffer, size_t size)
> > +{
> > +	u8 *ptr = buffer;
> > +	size_t length;
> > +	int ret;
> > +
> > +	ret = hdmi_mpeg_source_infoframe_check_only(frame);
> > +	if (ret)
> > +		return ret;
> > +
> > +	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> > +
> > +	if (size < length)
> > +		return -ENOSPC;
> > +
> > +	memset(buffer, 0, size);
> > +
> > +	ptr[0] = frame->type;
> > +	ptr[1] = frame->version;
> > +	ptr[2] = frame->length;
> > +	ptr[3] = 0; /* checksum */
> > +
> > +	/* start infoframe payload */
> > +	ptr += HDMI_INFOFRAME_HEADER_SIZE;
> > +
> > +	ptr[0] = frame->mpeg_bit_rate >> 0;
> > +	ptr[1] = frame->mpeg_bit_rate >> 8;
> > +	ptr[2] = frame->mpeg_bit_rate >> 16;
> > +	ptr[3] = frame->mpeg_bit_rate >> 24;
> > +	ptr[4] = (frame->field_repeat << 4) | frame->mpeg_frame;
> > +
> > +	hdmi_infoframe_set_checksum(buffer, length);
> > +
> > +	return length;
> > +}
> > +EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack_only);
> > +
> > +/**
> > + * hdmi_mpeg_source_infoframe_pack() - Check and check a HDMI MPEG Source infoframe,
> > + *                                     and write it to binary buffer
> > + * @frame: HDMI MPEG Source infoframe
> > + * @buffer: destination buffer
> > + * @size: size of buffer
> > + *
> > + * Validates that the infoframe is consistent and updates derived fields
> > + * (eg. length) based on other fields, after which packs the information
> > + * contained in the @frame structure into a binary representation that
> > + * can be written into the corresponding controller registers. Also
> > + * computes the checksum as required by section 5.3.5 of the HDMI 1.4
> > + * specification.
> > + *
> > + * Returns the number of bytes packed into the binary buffer or a negative
> > + * error code on failure.
> > + */
> > +ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame,
> > +					void *buffer, size_t size)
> > +{
> > +	int ret;
> > +
> > +	ret = hdmi_mpeg_source_infoframe_check(frame);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return hdmi_mpeg_source_infoframe_pack_only(frame, buffer, size);
> > +}
> > +EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack);
> > +
> >  /**
> >   * hdmi_infoframe_check() - Check check a HDMI infoframe
> >   * @frame: HDMI infoframe
> > @@ -727,6 +852,8 @@ hdmi_infoframe_check(union hdmi_infoframe *frame)
> >  		return hdmi_audio_infoframe_check(&frame->audio);
> >  	case HDMI_INFOFRAME_TYPE_VENDOR:
> >  		return hdmi_vendor_any_infoframe_check(&frame->vendor);
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		return hdmi_mpeg_source_infoframe_check(&frame->mpeg_source);
> >  	default:
> >  		WARN(1, "Bad infoframe type %d\n", frame->any.type);
> >  		return -EINVAL;
> > @@ -770,6 +897,10 @@ hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t
> >  		length = hdmi_vendor_any_infoframe_pack_only(&frame->vendor,
> >  							     buffer, size);
> >  		break;
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		length = hdmi_mpeg_source_infoframe_pack_only(&frame->mpeg_source,
> > +							      buffer, size);
> > +		break;
> >  	default:
> >  		WARN(1, "Bad infoframe type %d\n", frame->any.type);
> >  		length = -EINVAL;
> > @@ -816,6 +947,10 @@ hdmi_infoframe_pack(union hdmi_infoframe *frame,
> >  		length = hdmi_vendor_any_infoframe_pack(&frame->vendor,
> >  							buffer, size);
> >  		break;
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		length = hdmi_mpeg_source_infoframe_pack(&frame->mpeg_source,
> > +							 buffer, size);
> > +		break;
> >  	default:
> >  		WARN(1, "Bad infoframe type %d\n", frame->any.type);
> >  		length = -EINVAL;
> > @@ -838,6 +973,8 @@ static const char *hdmi_infoframe_type_get_name(enum hdmi_infoframe_type type)
> >  		return "Source Product Description (SPD)";
> >  	case HDMI_INFOFRAME_TYPE_AUDIO:
> >  		return "Audio";
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		return "MPEG Source";
> >  	}
> >  	return "Reserved";
> >  }
> > @@ -1349,6 +1486,46 @@ hdmi_vendor_any_infoframe_log(const char *level,
> >  	}
> >  }
> >  
> > +static const char *
> > +hdmi_mpeg_frame_get_name(enum hdmi_mpeg_frame frame)
> > +{
> > +	if (frame < 0 || frame > 3)
> > +		return "invalid";
> > +
> > +	switch (frame) {
> > +	case HDMI_MPEG_FRAME_UNKNOWN:
> > +		return "Unknown";
> > +	case HDMI_MPEG_FRAME_I_PICTURE:
> > +		return "I Picture";
> > +	case HDMI_MPEG_FRAME_B_PICTURE:
> > +		return "B Picture";
> > +	case HDMI_MPEG_FRAME_P_PICTURE:
> > +		return "P Picture";
> > +	}
> > +	return "Reserved";
> > +}
> > +
> > +/**
> > + * hdmi_mpeg_source_infoframe_log() - log info of HDMI MPEG Source infoframe
> > + * @level: logging level
> > + * @dev: device
> > + * @frame: HDMI MPEG Source infoframe
> > + */
> > +static void hdmi_mpeg_source_infoframe_log(const char *level,
> > +					   struct device *dev,
> > +					   const struct hdmi_mpeg_source_infoframe *frame)
> > +{
> > +	hdmi_infoframe_log_header(level, dev,
> > +				  (const struct hdmi_any_infoframe *)frame);
> > +
> > +	hdmi_log("    MPEG bit rate: %d Hz\n",
> > +		 frame->mpeg_bit_rate);
> > +	hdmi_log("    MPEG frame: %s\n",
> > +		 hdmi_mpeg_frame_get_name(frame->mpeg_frame));
> > +	hdmi_log("    field repeat: %s\n",
> > +		 frame->field_repeat ? "Yes" : "No");
> > +}
> > +
> >  /**
> >   * hdmi_infoframe_log() - log info of HDMI infoframe
> >   * @level: logging level
> > @@ -1372,6 +1549,9 @@ void hdmi_infoframe_log(const char *level,
> >  	case HDMI_INFOFRAME_TYPE_VENDOR:
> >  		hdmi_vendor_any_infoframe_log(level, dev, &frame->vendor);
> >  		break;
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		hdmi_mpeg_source_infoframe_log(level, dev, &frame->mpeg_source);
> > +		break;
> >  	}
> >  }
> >  EXPORT_SYMBOL(hdmi_infoframe_log);
> > @@ -1614,6 +1794,52 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
> >  	return 0;
> >  }
> >  
> > +/**
> > + * hdmi_mpeg_source_infoframe_unpack() - unpack binary buffer to a HDMI MPEG Source infoframe
> > + * @frame: HDMI MPEG Source infoframe
> > + * @buffer: source buffer
> > + * @size: size of buffer
> > + *
> > + * Unpacks the information contained in binary @buffer into a structured
> > + * @frame of the HDMI MPEG Source information frame.
> > + * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
> > + * specification.
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +static int hdmi_mpeg_source_infoframe_unpack(struct hdmi_mpeg_source_infoframe *frame,
> > +					     const void *buffer, size_t size)
> > +{
> > +	const u8 *ptr = buffer;
> > +	int ret;
> > +
> > +	if (size < HDMI_INFOFRAME_SIZE(MPEG_SOURCE))
> > +		return -EINVAL;
> > +
> > +	if (ptr[0] != HDMI_INFOFRAME_TYPE_MPEG_SOURCE ||
> > +	    ptr[1] != 1 ||
> > +	    ptr[2] != HDMI_MPEG_SOURCE_INFOFRAME_SIZE) {
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(MPEG_SOURCE)) != 0)
> > +		return -EINVAL;
> > +
> > +	ret = hdmi_mpeg_source_infoframe_init(frame);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ptr += HDMI_INFOFRAME_HEADER_SIZE;
> > +
> > +	frame->mpeg_bit_rate =
> > +		(ptr[0] << 0) | (ptr[1] << 8) |
> > +		(ptr[2] << 16) | (ptr[3] << 24);
> > +	frame->mpeg_frame = ptr[4] & 0x3;
> > +	frame->field_repeat = ptr[4] & 0x10;
> > +
> > +	return 0;
> > +}
> > +
> >  /**
> >   * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
> >   * @frame: HDMI infoframe
> > @@ -1649,6 +1875,9 @@ int hdmi_infoframe_unpack(union hdmi_infoframe *frame,
> >  	case HDMI_INFOFRAME_TYPE_VENDOR:
> >  		ret = hdmi_vendor_any_infoframe_unpack(&frame->vendor, buffer, size);
> >  		break;
> > +	case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > +		ret = hdmi_mpeg_source_infoframe_unpack(&frame->mpeg_source, buffer, size);
> > +		break;
> >  	default:
> >  		ret = -EINVAL;
> >  		break;
> > diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
> > index 80521d9591a1..2c9322f7538d 100644
> > --- a/include/linux/hdmi.h
> > +++ b/include/linux/hdmi.h
> > @@ -47,6 +47,7 @@ enum hdmi_infoframe_type {
> >  	HDMI_INFOFRAME_TYPE_AVI = 0x82,
> >  	HDMI_INFOFRAME_TYPE_SPD = 0x83,
> >  	HDMI_INFOFRAME_TYPE_AUDIO = 0x84,
> > +	HDMI_INFOFRAME_TYPE_MPEG_SOURCE = 0x85,
> >  };
> >  
> >  #define HDMI_IEEE_OUI 0x000c03
> > @@ -55,6 +56,7 @@ enum hdmi_infoframe_type {
> >  #define HDMI_AVI_INFOFRAME_SIZE    13
> >  #define HDMI_SPD_INFOFRAME_SIZE    25
> >  #define HDMI_AUDIO_INFOFRAME_SIZE  10
> > +#define HDMI_MPEG_SOURCE_INFOFRAME_SIZE  10
> >  
> >  #define HDMI_INFOFRAME_SIZE(type)	\
> >  	(HDMI_INFOFRAME_HEADER_SIZE + HDMI_ ## type ## _INFOFRAME_SIZE)
> > @@ -337,6 +339,29 @@ union hdmi_vendor_any_infoframe {
> >  	struct hdmi_vendor_infoframe hdmi;
> >  };
> >  
> > +enum hdmi_mpeg_frame {
> > +	HDMI_MPEG_FRAME_UNKNOWN,
> > +	HDMI_MPEG_FRAME_I_PICTURE,
> > +	HDMI_MPEG_FRAME_B_PICTURE,
> > +	HDMI_MPEG_FRAME_P_PICTURE,
> > +};
> > +
> > +struct hdmi_mpeg_source_infoframe {
> > +	enum hdmi_infoframe_type type;
> > +	unsigned char version;
> > +	unsigned char length;
> > +	unsigned int mpeg_bit_rate;
> > +	enum hdmi_mpeg_frame mpeg_frame;
> > +	bool field_repeat;
> > +};
> > +
> > +int hdmi_mpeg_source_infoframe_init(struct hdmi_mpeg_source_infoframe *frame);
> > +ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame,
> > +					void *buffer, size_t size);
> > +ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infoframe *frame,
> > +					     void *buffer, size_t size);
> > +int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
> > +
> >  /**
> >   * union hdmi_infoframe - overall union of all abstract infoframe representations
> >   * @any: generic infoframe
> > @@ -344,6 +369,7 @@ union hdmi_vendor_any_infoframe {
> >   * @spd: spd infoframe
> >   * @vendor: union of all vendor infoframes
> >   * @audio: audio infoframe
> > + * @mpeg_source: mpeg source infoframe
> >   *
> >   * This is used by the generic pack function. This works since all infoframes
> >   * have the same header which also indicates which type of infoframe should be
> > @@ -355,6 +381,7 @@ union hdmi_infoframe {
> >  	struct hdmi_spd_infoframe spd;
> >  	union hdmi_vendor_any_infoframe vendor;
> >  	struct hdmi_audio_infoframe audio;
> > +	struct hdmi_mpeg_source_infoframe mpeg_source;
> >  };
> >  
> >  ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer,
> > 

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-09-21 13:53 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-20 18:51 [PATCH 00/18] drm/i915: Infoframe precompute/check Ville Syrjala
2018-09-20 18:51 ` [PATCH 01/18] video/hdmi: Constify 'buffer' to the unpack functions Ville Syrjala
2018-09-21  8:03   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 02/18] video/hdmi: Pass buffer size to infoframe " Ville Syrjala
2018-09-21  8:06   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 03/18] video/hdmi: Constify infoframe passed to the log functions Ville Syrjala
2018-09-21  8:06   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 04/18] video/hdmi: Constify infoframe passed to the pack functions Ville Syrjala
2018-09-21  8:24   ` Hans Verkuil
2018-09-21 14:30     ` Ville Syrjälä
2018-09-21 14:33   ` [PATCH v3 " Ville Syrjala
2018-10-01 19:10     ` Ville Syrjälä
2018-10-02  6:37       ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 05/18] video/hdmi: Add an enum for HDMI packet types Ville Syrjala
2018-09-21  8:41   ` Hans Verkuil
2018-09-21 14:01     ` Ville Syrjälä
2018-09-21 14:12       ` Hans Verkuil
2018-09-21 15:07         ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe Ville Syrjala
2018-09-21  8:28   ` Hans Verkuil
2018-09-21 13:53     ` Ville Syrjälä [this message]
2018-09-21 15:09   ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe Ville Syrjala
2018-09-21  8:30   ` Hans Verkuil
2018-09-21 13:54     ` Ville Syrjälä
2018-09-21 15:10   ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 08/18] drm/i915: Use memmove() for punching the hole into infoframes Ville Syrjala
2018-09-21 13:52   ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 09/18] drm/i915: Pass intel_encoder to infoframe functions Ville Syrjala
2018-09-21 13:59   ` Daniel Vetter
2018-09-21 15:03     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 10/18] drm/i915: Add the missing HDMI gamut metadata packet stuff Ville Syrjala
2018-09-21 14:15   ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 11/18] drm/i915: Return the mask of enabled infoframes from ->inforame_enabled() Ville Syrjala
2018-09-24 15:51   ` Daniel Vetter
2018-09-24 16:36     ` [Intel-gfx] " Ville Syrjälä
2018-10-01  6:55       ` Daniel Vetter
2018-10-01 19:29         ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 12/18] drm/i915: Store mask of enabled infoframes in the crtc state Ville Syrjala
2018-09-24 15:51   ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 13/18] drm/i915: Precompute HDMI infoframes Ville Syrjala
2018-09-24 15:58   ` Daniel Vetter
2018-09-24 16:42     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 14/18] drm/i915: Read out " Ville Syrjala
2018-09-24 16:08   ` Daniel Vetter
2018-09-24 16:52     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 15/18] drm/i915/sdvo: Precompute " Ville Syrjala
2018-09-20 18:51 ` [PATCH 16/18] drm/i915/sdvo: Read out " Ville Syrjala
2018-09-24 16:10   ` [Intel-gfx] " Daniel Vetter
2018-09-24 17:13     ` Ville Syrjälä
2018-10-01  6:59       ` Daniel Vetter
2018-10-01 13:35         ` Ville Syrjälä
2018-10-01 16:48           ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 17/18] drm/i915: Check infoframe state in intel_pipe_config_compare() Ville Syrjala
2018-09-24 16:12   ` Daniel Vetter
2018-10-01 20:35     ` [Intel-gfx] " Ville Syrjälä
2018-10-02  8:16       ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 18/18] drm/i915: Include infoframes in the crtc state dump Ville Syrjala
2018-09-24 16:14   ` [Intel-gfx] " Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180921135314.GV5565@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hans.verkuil@cisco.com \
    --cc=hansverk@cisco.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-media@vger.kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).