From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Hans Verkuil <hansverk@cisco.com>
Cc: intel-gfx@lists.freedesktop.org,
Hans Verkuil <hans.verkuil@cisco.com>,
dri-devel@lists.freedesktop.org, linux-media@vger.kernel.org
Subject: Re: [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe
Date: Fri, 21 Sep 2018 16:54:12 +0300 [thread overview]
Message-ID: <20180921135412.GW5565@intel.com> (raw)
In-Reply-To: <4e790da9-a49c-e4b2-d528-4c6c8bca722e@cisco.com>
On Fri, Sep 21, 2018 at 10:30:16AM +0200, Hans Verkuil wrote:
> On 09/20/18 20:51, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Add the code to deal with the NTSC VBI infoframe.
> >
> > I decided against parsing the PES_data_field and just leave
> > it as an opaque blob, just dumping it out as hex in the log.
> >
> > Blindly typed from the spec, and totally untested.
>
> Do we have any driver that uses this? I would prefer to wait until someone
> actually need this.
No users that I know of. So totally fine with me to leave it out.
>
> Regards,
>
> Hans
>
> >
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Hans Verkuil <hans.verkuil@cisco.com>
> > Cc: linux-media@vger.kernel.org
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/video/hdmi.c | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > include/linux/hdmi.h | 18 +++++
> > 2 files changed, 226 insertions(+)
> >
> > diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> > index 3d24c7746c51..3c320d69fa0a 100644
> > --- a/drivers/video/hdmi.c
> > +++ b/drivers/video/hdmi.c
> > @@ -831,6 +831,139 @@ ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame
> > }
> > EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack);
> >
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_init() - initialize an HDMI NTSC VBI infoframe
> > + * @frame: HDMI NTSC VBI infoframe
> > + * @pes_data_field: ANSI/SCTE 127 PES_data_field
> > + * @length: ANSI/SCTE 127 PES_data_field length
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +int hdmi_ntsc_vbi_infoframe_init(struct hdmi_ntsc_vbi_infoframe *frame,
> > + const void *pes_data_field,
> > + size_t length)
> > +{
> > + if (length < 1 || length > 27)
> > + return -EINVAL;
> > +
> > + memset(frame, 0, sizeof(*frame));
> > +
> > + frame->type = HDMI_INFOFRAME_TYPE_NTSC_VBI;
> > + frame->version = 1;
> > + frame->length = length;
> > +
> > + memcpy(frame->pes_data_field, pes_data_field, length);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_init);
> > +
> > +static int hdmi_ntsc_vbi_infoframe_check_only(const struct hdmi_ntsc_vbi_infoframe *frame)
> > +{
> > + if (frame->type != HDMI_INFOFRAME_TYPE_NTSC_VBI ||
> > + frame->version != 1 ||
> > + frame->length < 1 || frame->length > 27)
> > + return -EINVAL;
> > +
> > + if (frame->pes_data_field[0] != 0x99)
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_check() - Check and check a HDMI NTSC VBI infoframe
> > + * @frame: HDMI NTSC VBI infoframe
> > + *
> > + * Validates that the infoframe is consistent and updates derived fields
> > + * (eg. length) based on other fields.
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +int hdmi_ntsc_vbi_infoframe_check(struct hdmi_ntsc_vbi_infoframe *frame)
> > +{
> > + return hdmi_ntsc_vbi_infoframe_check_only(frame);
> > +}
> > +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_check);
> > +
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_pack_only() - write HDMI NTSC VBI infoframe to binary buffer
> > + * @frame: HDMI NTSC VBI infoframe
> > + * @buffer: destination buffer
> > + * @size: size of buffer
> > + *
> > + * Packs the information contained in the @frame structure into a binary
> > + * representation that can be written into the corresponding controller
> > + * registers. Also computes the checksum as required by section 5.3.5 of
> > + * the HDMI 1.4 specification.
> > + *
> > + * Returns the number of bytes packed into the binary buffer or a negative
> > + * error code on failure.
> > + */
> > +ssize_t hdmi_ntsc_vbi_infoframe_pack_only(const struct hdmi_ntsc_vbi_infoframe *frame,
> > + void *buffer, size_t size)
> > +{
> > + u8 *ptr = buffer;
> > + size_t length;
> > + int ret;
> > +
> > + ret = hdmi_ntsc_vbi_infoframe_check_only(frame);
> > + if (ret)
> > + return ret;
> > +
> > + length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> > +
> > + if (size < length)
> > + return -ENOSPC;
> > +
> > + memset(buffer, 0, size);
> > +
> > + ptr[0] = frame->type;
> > + ptr[1] = frame->version;
> > + ptr[2] = frame->length;
> > + ptr[3] = 0; /* checksum */
> > +
> > + /* start infoframe payload */
> > + ptr += HDMI_INFOFRAME_HEADER_SIZE;
> > +
> > + memcpy(ptr, frame->pes_data_field, frame->length);
> > +
> > + hdmi_infoframe_set_checksum(buffer, length);
> > +
> > + return length;
> > +}
> > +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_pack_only);
> > +
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_pack() - Check and check a HDMI NTSC VBI infoframe,
> > + * and write it to binary buffer
> > + * @frame: HDMI NTSC VBI infoframe
> > + * @buffer: destination buffer
> > + * @size: size of buffer
> > + *
> > + * Validates that the infoframe is consistent and updates derived fields
> > + * (eg. length) based on other fields, after which packs the information
> > + * contained in the @frame structure into a binary representation that
> > + * can be written into the corresponding controller registers. Also
> > + * computes the checksum as required by section 5.3.5 of the HDMI 1.4
> > + * specification.
> > + *
> > + * Returns the number of bytes packed into the binary buffer or a negative
> > + * error code on failure.
> > + */
> > +ssize_t hdmi_ntsc_vbi_infoframe_pack(struct hdmi_ntsc_vbi_infoframe *frame,
> > + void *buffer, size_t size)
> > +{
> > + int ret;
> > +
> > + ret = hdmi_ntsc_vbi_infoframe_check(frame);
> > + if (ret)
> > + return ret;
> > +
> > + return hdmi_ntsc_vbi_infoframe_pack_only(frame, buffer, size);
> > +}
> > +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_pack);
> > +
> > /**
> > * hdmi_infoframe_check() - Check check a HDMI infoframe
> > * @frame: HDMI infoframe
> > @@ -854,6 +987,8 @@ hdmi_infoframe_check(union hdmi_infoframe *frame)
> > return hdmi_vendor_any_infoframe_check(&frame->vendor);
> > case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > return hdmi_mpeg_source_infoframe_check(&frame->mpeg_source);
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + return hdmi_ntsc_vbi_infoframe_check(&frame->ntsc_vbi);
> > default:
> > WARN(1, "Bad infoframe type %d\n", frame->any.type);
> > return -EINVAL;
> > @@ -901,6 +1036,10 @@ hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t
> > length = hdmi_mpeg_source_infoframe_pack_only(&frame->mpeg_source,
> > buffer, size);
> > break;
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + length = hdmi_ntsc_vbi_infoframe_pack_only(&frame->ntsc_vbi,
> > + buffer, size);
> > + break;
> > default:
> > WARN(1, "Bad infoframe type %d\n", frame->any.type);
> > length = -EINVAL;
> > @@ -951,6 +1090,10 @@ hdmi_infoframe_pack(union hdmi_infoframe *frame,
> > length = hdmi_mpeg_source_infoframe_pack(&frame->mpeg_source,
> > buffer, size);
> > break;
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + length = hdmi_ntsc_vbi_infoframe_pack(&frame->ntsc_vbi,
> > + buffer, size);
> > + break;
> > default:
> > WARN(1, "Bad infoframe type %d\n", frame->any.type);
> > length = -EINVAL;
> > @@ -975,6 +1118,8 @@ static const char *hdmi_infoframe_type_get_name(enum hdmi_infoframe_type type)
> > return "Audio";
> > case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > return "MPEG Source";
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + return "NTSC VBI";
> > }
> > return "Reserved";
> > }
> > @@ -1526,6 +1671,22 @@ static void hdmi_mpeg_source_infoframe_log(const char *level,
> > frame->field_repeat ? "Yes" : "No");
> > }
> >
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_log() - log info of HDMI NTSC VBI infoframe
> > + * @level: logging level
> > + * @dev: device
> > + * @frame: HDMI NTSC VBI infoframe
> > + */
> > +static void hdmi_ntsc_vbi_infoframe_log(const char *level,
> > + struct device *dev,
> > + const struct hdmi_ntsc_vbi_infoframe *frame)
> > +{
> > + hdmi_infoframe_log_header(level, dev,
> > + (const struct hdmi_any_infoframe *)frame);
> > +
> > + hdmi_log(" %*ph\n", frame->length, frame->pes_data_field);
> > +}
> > +
> > /**
> > * hdmi_infoframe_log() - log info of HDMI infoframe
> > * @level: logging level
> > @@ -1552,6 +1713,9 @@ void hdmi_infoframe_log(const char *level,
> > case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > hdmi_mpeg_source_infoframe_log(level, dev, &frame->mpeg_source);
> > break;
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + hdmi_ntsc_vbi_infoframe_log(level, dev, &frame->ntsc_vbi);
> > + break;
> > }
> > }
> > EXPORT_SYMBOL(hdmi_infoframe_log);
> > @@ -1840,6 +2004,47 @@ static int hdmi_mpeg_source_infoframe_unpack(struct hdmi_mpeg_source_infoframe *
> > return 0;
> > }
> >
> > +/**
> > + * hdmi_ntsc_vbi_infoframe_unpack() - unpack binary buffer to a HDMI MPEG Source infoframe
> > + * @frame: HDMI MPEG Source infoframe
> > + * @buffer: source buffer
> > + * @size: size of buffer
> > + *
> > + * Unpacks the information contained in binary @buffer into a structured
> > + * @frame of the HDMI MPEG Source information frame.
> > + * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
> > + * specification.
> > + *
> > + * Returns 0 on success or a negative error code on failure.
> > + */
> > +static int hdmi_ntsc_vbi_infoframe_unpack(struct hdmi_ntsc_vbi_infoframe *frame,
> > + const void *buffer, size_t size)
> > +{
> > + const u8 *ptr = buffer;
> > + size_t length;
> > +
> > + if (size < HDMI_INFOFRAME_HEADER_SIZE)
> > + return -EINVAL;
> > +
> > + if (ptr[0] != HDMI_INFOFRAME_TYPE_NTSC_VBI ||
> > + ptr[1] != 1 ||
> > + ptr[2] < 1 || ptr[2] > 27)
> > + return -EINVAL;
> > +
> > + length = ptr[2];
> > +
> > + if (size < HDMI_INFOFRAME_HEADER_SIZE + length)
> > + return -EINVAL;
> > +
> > + if (hdmi_infoframe_checksum(buffer,
> > + HDMI_INFOFRAME_HEADER_SIZE + length) != 0)
> > + return -EINVAL;
> > +
> > + ptr += HDMI_INFOFRAME_HEADER_SIZE;
> > +
> > + return hdmi_ntsc_vbi_infoframe_init(frame, ptr, length);
> > +}
> > +
> > /**
> > * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
> > * @frame: HDMI infoframe
> > @@ -1878,6 +2083,9 @@ int hdmi_infoframe_unpack(union hdmi_infoframe *frame,
> > case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> > ret = hdmi_mpeg_source_infoframe_unpack(&frame->mpeg_source, buffer, size);
> > break;
> > + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> > + ret = hdmi_ntsc_vbi_infoframe_unpack(&frame->ntsc_vbi, buffer, size);
> > + break;
> > default:
> > ret = -EINVAL;
> > break;
> > diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
> > index 2c9322f7538d..3821516b336c 100644
> > --- a/include/linux/hdmi.h
> > +++ b/include/linux/hdmi.h
> > @@ -48,6 +48,7 @@ enum hdmi_infoframe_type {
> > HDMI_INFOFRAME_TYPE_SPD = 0x83,
> > HDMI_INFOFRAME_TYPE_AUDIO = 0x84,
> > HDMI_INFOFRAME_TYPE_MPEG_SOURCE = 0x85,
> > + HDMI_INFOFRAME_TYPE_NTSC_VBI = 0x86,
> > };
> >
> > #define HDMI_IEEE_OUI 0x000c03
> > @@ -362,6 +363,21 @@ ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infof
> > void *buffer, size_t size);
> > int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
> >
> > +struct hdmi_ntsc_vbi_infoframe {
> > + enum hdmi_infoframe_type type;
> > + unsigned char version;
> > + unsigned char length;
> > + unsigned char pes_data_field[27];
> > +};
> > +
> > +int hdmi_ntsc_vbi_infoframe_init(struct hdmi_ntsc_vbi_infoframe *frame,
> > + const void *pes_data_field, size_t length);
> > +ssize_t hdmi_ntsc_vbi_infoframe_pack(struct hdmi_ntsc_vbi_infoframe *frame,
> > + void *buffer, size_t size);
> > +ssize_t hdmi_ntsc_vbi_infoframe_pack_only(const struct hdmi_ntsc_vbi_infoframe *frame,
> > + void *buffer, size_t size);
> > +int hdmi_ntsc_vbi_infoframe_check(struct hdmi_ntsc_vbi_infoframe *frame);
> > +
> > /**
> > * union hdmi_infoframe - overall union of all abstract infoframe representations
> > * @any: generic infoframe
> > @@ -370,6 +386,7 @@ int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
> > * @vendor: union of all vendor infoframes
> > * @audio: audio infoframe
> > * @mpeg_source: mpeg source infoframe
> > + * @ntsc_vbi: ntsc vbi infoframe
> > *
> > * This is used by the generic pack function. This works since all infoframes
> > * have the same header which also indicates which type of infoframe should be
> > @@ -382,6 +399,7 @@ union hdmi_infoframe {
> > union hdmi_vendor_any_infoframe vendor;
> > struct hdmi_audio_infoframe audio;
> > struct hdmi_mpeg_source_infoframe mpeg_source;
> > + struct hdmi_ntsc_vbi_infoframe ntsc_vbi;
> > };
> >
> > ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer,
> >
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-09-21 13:54 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 18:51 [PATCH 00/18] drm/i915: Infoframe precompute/check Ville Syrjala
2018-09-20 18:51 ` [PATCH 01/18] video/hdmi: Constify 'buffer' to the unpack functions Ville Syrjala
2018-09-21 8:03 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 02/18] video/hdmi: Pass buffer size to infoframe " Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 03/18] video/hdmi: Constify infoframe passed to the log functions Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 04/18] video/hdmi: Constify infoframe passed to the pack functions Ville Syrjala
2018-09-21 8:24 ` Hans Verkuil
2018-09-21 14:30 ` Ville Syrjälä
2018-09-21 14:33 ` [PATCH v3 " Ville Syrjala
2018-10-01 19:10 ` Ville Syrjälä
2018-10-02 6:37 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 05/18] video/hdmi: Add an enum for HDMI packet types Ville Syrjala
2018-09-21 8:41 ` Hans Verkuil
2018-09-21 14:01 ` Ville Syrjälä
2018-09-21 14:12 ` Hans Verkuil
2018-09-21 15:07 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe Ville Syrjala
2018-09-21 8:28 ` Hans Verkuil
2018-09-21 13:53 ` Ville Syrjälä
2018-09-21 15:09 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe Ville Syrjala
2018-09-21 8:30 ` Hans Verkuil
2018-09-21 13:54 ` Ville Syrjälä [this message]
2018-09-21 15:10 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 08/18] drm/i915: Use memmove() for punching the hole into infoframes Ville Syrjala
2018-09-21 13:52 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 09/18] drm/i915: Pass intel_encoder to infoframe functions Ville Syrjala
2018-09-21 13:59 ` Daniel Vetter
2018-09-21 15:03 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 10/18] drm/i915: Add the missing HDMI gamut metadata packet stuff Ville Syrjala
2018-09-21 14:15 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 11/18] drm/i915: Return the mask of enabled infoframes from ->inforame_enabled() Ville Syrjala
2018-09-24 15:51 ` Daniel Vetter
2018-09-24 16:36 ` [Intel-gfx] " Ville Syrjälä
2018-10-01 6:55 ` Daniel Vetter
2018-10-01 19:29 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 12/18] drm/i915: Store mask of enabled infoframes in the crtc state Ville Syrjala
2018-09-24 15:51 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 13/18] drm/i915: Precompute HDMI infoframes Ville Syrjala
2018-09-24 15:58 ` Daniel Vetter
2018-09-24 16:42 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 14/18] drm/i915: Read out " Ville Syrjala
2018-09-24 16:08 ` Daniel Vetter
2018-09-24 16:52 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 15/18] drm/i915/sdvo: Precompute " Ville Syrjala
2018-09-20 18:51 ` [PATCH 16/18] drm/i915/sdvo: Read out " Ville Syrjala
2018-09-24 16:10 ` [Intel-gfx] " Daniel Vetter
2018-09-24 17:13 ` Ville Syrjälä
2018-10-01 6:59 ` Daniel Vetter
2018-10-01 13:35 ` Ville Syrjälä
2018-10-01 16:48 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 17/18] drm/i915: Check infoframe state in intel_pipe_config_compare() Ville Syrjala
2018-09-24 16:12 ` Daniel Vetter
2018-10-01 20:35 ` [Intel-gfx] " Ville Syrjälä
2018-10-02 8:16 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 18/18] drm/i915: Include infoframes in the crtc state dump Ville Syrjala
2018-09-24 16:14 ` [Intel-gfx] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921135412.GW5565@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hans.verkuil@cisco.com \
--cc=hansverk@cisco.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).