dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org,
	Hans Verkuil <hans.verkuil@cisco.com>,
	linux-media@vger.kernel.org
Subject: Re: [PATCH v3 04/18] video/hdmi: Constify infoframe passed to the pack functions
Date: Mon, 1 Oct 2018 22:10:37 +0300	[thread overview]
Message-ID: <20181001191037.GN9144@intel.com> (raw)
In-Reply-To: <20180921143332.28970-1-ville.syrjala@linux.intel.com>

On Fri, Sep 21, 2018 at 05:33:32PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Let's make the infoframe pack functions usable with a const infoframe
> structure. This allows us to precompute the infoframe earlier, and still
> pack it later when we're no longer allowed to modify the structure.
> So now we end up with a _check()+_pack_only() or _pack() functions
> depending on whether you want to precompute the infoframes or not.
> The names aren't great but I was lazy and didn't want to change all the
> drivers.
> 
> v2: Deal with exynos churn
>     Actually export the new funcs
> v3: Fix various documentation fails (Hans)

Hans, any more concerns about this patch?

> 
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: linux-media@vger.kernel.org
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/video/hdmi.c | 425 +++++++++++++++++++++++++++++++++++++++++++++++----
>  include/linux/hdmi.h |  19 ++-
>  2 files changed, 416 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> index 53e7ee2c83fc..08d94ab00467 100644
> --- a/drivers/video/hdmi.c
> +++ b/drivers/video/hdmi.c
> @@ -68,8 +68,36 @@ int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame)
>  }
>  EXPORT_SYMBOL(hdmi_avi_infoframe_init);
>  
> +static int hdmi_avi_infoframe_check_only(const struct hdmi_avi_infoframe *frame)
> +{
> +	if (frame->type != HDMI_INFOFRAME_TYPE_AVI ||
> +	    frame->version != 2 ||
> +	    frame->length != HDMI_AVI_INFOFRAME_SIZE)
> +		return -EINVAL;
> +
> +	if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  /**
> - * hdmi_avi_infoframe_pack() - write HDMI AVI infoframe to binary buffer
> + * hdmi_avi_infoframe_check() - check a HDMI AVI infoframe
> + * @frame: HDMI AVI infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_avi_infoframe_check(struct hdmi_avi_infoframe *frame)
> +{
> +	return hdmi_avi_infoframe_check_only(frame);
> +}
> +EXPORT_SYMBOL(hdmi_avi_infoframe_check);
> +
> +/**
> + * hdmi_avi_infoframe_pack_only() - write HDMI AVI infoframe to binary buffer
>   * @frame: HDMI AVI infoframe
>   * @buffer: destination buffer
>   * @size: size of buffer
> @@ -82,20 +110,22 @@ EXPORT_SYMBOL(hdmi_avi_infoframe_init);
>   * Returns the number of bytes packed into the binary buffer or a negative
>   * error code on failure.
>   */
> -ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
> -				size_t size)
> +ssize_t hdmi_avi_infoframe_pack_only(const struct hdmi_avi_infoframe *frame,
> +				     void *buffer, size_t size)
>  {
>  	u8 *ptr = buffer;
>  	size_t length;
> +	int ret;
> +
> +	ret = hdmi_avi_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
>  
>  	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
>  
>  	if (size < length)
>  		return -ENOSPC;
>  
> -	if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9)
> -		return -EINVAL;
> -
>  	memset(buffer, 0, size);
>  
>  	ptr[0] = frame->type;
> @@ -152,6 +182,36 @@ ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
>  
>  	return length;
>  }
> +EXPORT_SYMBOL(hdmi_avi_infoframe_pack_only);
> +
> +/**
> + * hdmi_avi_infoframe_pack() - check a HDMI AVI infoframe,
> + *                             and write it to binary buffer
> + * @frame: HDMI AVI infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which it packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. This function
> + * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame,
> +				void *buffer, size_t size)
> +{
> +	int ret;
> +
> +	ret = hdmi_avi_infoframe_check(frame);
> +	if (ret)
> +		return ret;
> +
> +	return hdmi_avi_infoframe_pack_only(frame, buffer, size);
> +}
>  EXPORT_SYMBOL(hdmi_avi_infoframe_pack);
>  
>  /**
> @@ -178,8 +238,33 @@ int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame,
>  }
>  EXPORT_SYMBOL(hdmi_spd_infoframe_init);
>  
> +static int hdmi_spd_infoframe_check_only(const struct hdmi_spd_infoframe *frame)
> +{
> +	if (frame->type != HDMI_INFOFRAME_TYPE_SPD ||
> +	    frame->version != 1 ||
> +	    frame->length != HDMI_SPD_INFOFRAME_SIZE)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  /**
> - * hdmi_spd_infoframe_pack() - write HDMI SPD infoframe to binary buffer
> + * hdmi_spd_infoframe_check() - check a HDMI SPD infoframe
> + * @frame: HDMI SPD infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_spd_infoframe_check(struct hdmi_spd_infoframe *frame)
> +{
> +	return hdmi_spd_infoframe_check_only(frame);
> +}
> +EXPORT_SYMBOL(hdmi_spd_infoframe_check);
> +
> +/**
> + * hdmi_spd_infoframe_pack_only() - write HDMI SPD infoframe to binary buffer
>   * @frame: HDMI SPD infoframe
>   * @buffer: destination buffer
>   * @size: size of buffer
> @@ -192,11 +277,16 @@ EXPORT_SYMBOL(hdmi_spd_infoframe_init);
>   * Returns the number of bytes packed into the binary buffer or a negative
>   * error code on failure.
>   */
> -ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
> -				size_t size)
> +ssize_t hdmi_spd_infoframe_pack_only(const struct hdmi_spd_infoframe *frame,
> +				     void *buffer, size_t size)
>  {
>  	u8 *ptr = buffer;
>  	size_t length;
> +	int ret;
> +
> +	ret = hdmi_spd_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
>  
>  	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
>  
> @@ -222,6 +312,36 @@ ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
>  
>  	return length;
>  }
> +EXPORT_SYMBOL(hdmi_spd_infoframe_pack_only);
> +
> +/**
> + * hdmi_spd_infoframe_pack() - check a HDMI SPD infoframe,
> + *                             and write it to binary buffer
> + * @frame: HDMI SPD infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which it packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. This function
> + * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame,
> +				void *buffer, size_t size)
> +{
> +	int ret;
> +
> +	ret = hdmi_spd_infoframe_check(frame);
> +	if (ret)
> +		return ret;
> +
> +	return hdmi_spd_infoframe_pack_only(frame, buffer, size);
> +}
>  EXPORT_SYMBOL(hdmi_spd_infoframe_pack);
>  
>  /**
> @@ -242,8 +362,33 @@ int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame)
>  }
>  EXPORT_SYMBOL(hdmi_audio_infoframe_init);
>  
> +static int hdmi_audio_infoframe_check_only(const struct hdmi_audio_infoframe *frame)
> +{
> +	if (frame->type != HDMI_INFOFRAME_TYPE_AUDIO ||
> +	    frame->version != 1 ||
> +	    frame->length != HDMI_AUDIO_INFOFRAME_SIZE)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +/**
> + * hdmi_audio_infoframe_check() - check a HDMI audio infoframe
> + * @frame: HDMI audio infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame)
> +{
> +	return hdmi_audio_infoframe_check_only(frame);
> +}
> +EXPORT_SYMBOL(hdmi_audio_infoframe_check);
> +
>  /**
> - * hdmi_audio_infoframe_pack() - write HDMI audio infoframe to binary buffer
> + * hdmi_audio_infoframe_pack_only() - write HDMI audio infoframe to binary buffer
>   * @frame: HDMI audio infoframe
>   * @buffer: destination buffer
>   * @size: size of buffer
> @@ -256,12 +401,17 @@ EXPORT_SYMBOL(hdmi_audio_infoframe_init);
>   * Returns the number of bytes packed into the binary buffer or a negative
>   * error code on failure.
>   */
> -ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
> -				  void *buffer, size_t size)
> +ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
> +				       void *buffer, size_t size)
>  {
>  	unsigned char channels;
>  	u8 *ptr = buffer;
>  	size_t length;
> +	int ret;
> +
> +	ret = hdmi_audio_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
>  
>  	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
>  
> @@ -297,6 +447,36 @@ ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
>  
>  	return length;
>  }
> +EXPORT_SYMBOL(hdmi_audio_infoframe_pack_only);
> +
> +/**
> + * hdmi_audio_infoframe_pack() - check a HDMI Audio infoframe,
> + *                               and write it to binary buffer
> + * @frame: HDMI Audio infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which it packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. This function
> + * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
> +				  void *buffer, size_t size)
> +{
> +	int ret;
> +
> +	ret = hdmi_audio_infoframe_check(frame);
> +	if (ret)
> +		return ret;
> +
> +	return hdmi_audio_infoframe_pack_only(frame, buffer, size);
> +}
>  EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
>  
>  /**
> @@ -319,6 +499,7 @@ int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame)
>  	 * value
>  	 */
>  	frame->s3d_struct = HDMI_3D_STRUCTURE_INVALID;
> +	frame->length = 4;
>  
>  	return 0;
>  }
> @@ -335,8 +516,42 @@ static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *fram
>  		return 4;
>  }
>  
> +static int hdmi_vendor_infoframe_check_only(const struct hdmi_vendor_infoframe *frame)
> +{
> +	if (frame->type != HDMI_INFOFRAME_TYPE_VENDOR ||
> +	    frame->version != 1 ||
> +	    frame->oui != HDMI_IEEE_OUI)
> +		return -EINVAL;
> +
> +	/* only one of those can be supplied */
> +	if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
> +		return -EINVAL;
> +
> +	if (frame->length != hdmi_vendor_infoframe_length(frame))
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  /**
> - * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
> + * hdmi_vendor_infoframe_check() - check a HDMI vendor infoframe
> + * @frame: HDMI infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_vendor_infoframe_check(struct hdmi_vendor_infoframe *frame)
> +{
> +	frame->length = hdmi_vendor_infoframe_length(frame);
> +
> +	return hdmi_vendor_infoframe_check_only(frame);
> +}
> +EXPORT_SYMBOL(hdmi_vendor_infoframe_check);
> +
> +/**
> + * hdmi_vendor_infoframe_pack_only() - write a HDMI vendor infoframe to binary buffer
>   * @frame: HDMI infoframe
>   * @buffer: destination buffer
>   * @size: size of buffer
> @@ -349,17 +564,16 @@ static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *fram
>   * Returns the number of bytes packed into the binary buffer or a negative
>   * error code on failure.
>   */
> -ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> -				 void *buffer, size_t size)
> +ssize_t hdmi_vendor_infoframe_pack_only(const struct hdmi_vendor_infoframe *frame,
> +					void *buffer, size_t size)
>  {
>  	u8 *ptr = buffer;
>  	size_t length;
> +	int ret;
>  
> -	/* only one of those can be supplied */
> -	if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
> -		return -EINVAL;
> -
> -	frame->length = hdmi_vendor_infoframe_length(frame);
> +	ret = hdmi_vendor_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
>  
>  	length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
>  
> @@ -394,24 +608,134 @@ ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
>  
>  	return length;
>  }
> +EXPORT_SYMBOL(hdmi_vendor_infoframe_pack_only);
> +
> +/**
> + * hdmi_vendor_infoframe_pack() - check a HDMI Vendor infoframe,
> + *                                and write it to binary buffer
> + * @frame: HDMI Vendor infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which it packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. This function
> + * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
> +				   void *buffer, size_t size)
> +{
> +	int ret;
> +
> +	ret = hdmi_vendor_infoframe_check(frame);
> +	if (ret)
> +		return ret;
> +
> +	return hdmi_vendor_infoframe_pack_only(frame, buffer, size);
> +}
>  EXPORT_SYMBOL(hdmi_vendor_infoframe_pack);
>  
> +static int
> +hdmi_vendor_any_infoframe_check_only(const union hdmi_vendor_any_infoframe *frame)
> +{
> +	if (frame->any.type != HDMI_INFOFRAME_TYPE_VENDOR ||
> +	    frame->any.version != 1)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  /*
> - * hdmi_vendor_any_infoframe_pack() - write a vendor infoframe to binary buffer
> + * hdmi_vendor_any_infoframe_check() - check a vendor infoframe
> + */
> +static int
> +hdmi_vendor_any_infoframe_check(union hdmi_vendor_any_infoframe *frame)
> +{
> +	int ret;
> +
> +	ret = hdmi_vendor_any_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
> +
> +	/* we only know about HDMI vendor infoframes */
> +	if (frame->any.oui != HDMI_IEEE_OUI)
> +		return -EINVAL;
> +
> +	return hdmi_vendor_infoframe_check(&frame->hdmi);
> +}
> +
> +/*
> + * hdmi_vendor_any_infoframe_pack_only() - write a vendor infoframe to binary buffer
>   */
>  static ssize_t
> -hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
> -			   void *buffer, size_t size)
> +hdmi_vendor_any_infoframe_pack_only(const union hdmi_vendor_any_infoframe *frame,
> +				    void *buffer, size_t size)
>  {
> +	int ret;
> +
> +	ret = hdmi_vendor_any_infoframe_check_only(frame);
> +	if (ret)
> +		return ret;
> +
>  	/* we only know about HDMI vendor infoframes */
>  	if (frame->any.oui != HDMI_IEEE_OUI)
>  		return -EINVAL;
>  
> -	return hdmi_vendor_infoframe_pack(&frame->hdmi, buffer, size);
> +	return hdmi_vendor_infoframe_pack_only(&frame->hdmi, buffer, size);
> +}
> +
> +/*
> + * hdmi_vendor_any_infoframe_pack() - check a vendor infoframe,
> + *                                    and write it to binary buffer
> + */
> +static ssize_t
> +hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
> +			       void *buffer, size_t size)
> +{
> +	int ret;
> +
> +	ret = hdmi_vendor_any_infoframe_check(frame);
> +	if (ret)
> +		return ret;
> +
> +	return hdmi_vendor_any_infoframe_pack_only(frame, buffer, size);
> +}
> +
> +/**
> + * hdmi_infoframe_check() - check a HDMI infoframe
> + * @frame: HDMI infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int
> +hdmi_infoframe_check(union hdmi_infoframe *frame)
> +{
> +	switch (frame->any.type) {
> +	case HDMI_INFOFRAME_TYPE_AVI:
> +		return hdmi_avi_infoframe_check(&frame->avi);
> +	case HDMI_INFOFRAME_TYPE_SPD:
> +		return hdmi_spd_infoframe_check(&frame->spd);
> +	case HDMI_INFOFRAME_TYPE_AUDIO:
> +		return hdmi_audio_infoframe_check(&frame->audio);
> +	case HDMI_INFOFRAME_TYPE_VENDOR:
> +		return hdmi_vendor_any_infoframe_check(&frame->vendor);
> +	default:
> +		WARN(1, "Bad infoframe type %d\n", frame->any.type);
> +		return -EINVAL;
> +	}
>  }
> +EXPORT_SYMBOL(hdmi_infoframe_check);
>  
>  /**
> - * hdmi_infoframe_pack() - write a HDMI infoframe to binary buffer
> + * hdmi_infoframe_pack_only() - write a HDMI infoframe to binary buffer
>   * @frame: HDMI infoframe
>   * @buffer: destination buffer
>   * @size: size of buffer
> @@ -425,7 +749,56 @@ hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
>   * error code on failure.
>   */
>  ssize_t
> -hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, size_t size)
> +hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t size)
> +{
> +	ssize_t length;
> +
> +	switch (frame->any.type) {
> +	case HDMI_INFOFRAME_TYPE_AVI:
> +		length = hdmi_avi_infoframe_pack_only(&frame->avi,
> +						      buffer, size);
> +		break;
> +	case HDMI_INFOFRAME_TYPE_SPD:
> +		length = hdmi_spd_infoframe_pack_only(&frame->spd,
> +						      buffer, size);
> +		break;
> +	case HDMI_INFOFRAME_TYPE_AUDIO:
> +		length = hdmi_audio_infoframe_pack_only(&frame->audio,
> +							buffer, size);
> +		break;
> +	case HDMI_INFOFRAME_TYPE_VENDOR:
> +		length = hdmi_vendor_any_infoframe_pack_only(&frame->vendor,
> +							     buffer, size);
> +		break;
> +	default:
> +		WARN(1, "Bad infoframe type %d\n", frame->any.type);
> +		length = -EINVAL;
> +	}
> +
> +	return length;
> +}
> +EXPORT_SYMBOL(hdmi_infoframe_pack_only);
> +
> +/**
> + * hdmi_infoframe_pack() - check a HDMI infoframe,
> + *                         and write it to binary buffer
> + * @frame: HDMI infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which it packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. This function
> + * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t
> +hdmi_infoframe_pack(union hdmi_infoframe *frame,
> +		    void *buffer, size_t size)
>  {
>  	ssize_t length;
>  
> diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
> index bce1abb1fe57..c76b50a48e48 100644
> --- a/include/linux/hdmi.h
> +++ b/include/linux/hdmi.h
> @@ -163,6 +163,9 @@ struct hdmi_avi_infoframe {
>  int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame);
>  ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
>  				size_t size);
> +ssize_t hdmi_avi_infoframe_pack_only(const struct hdmi_avi_infoframe *frame,
> +				     void *buffer, size_t size);
> +int hdmi_avi_infoframe_check(struct hdmi_avi_infoframe *frame);
>  
>  enum hdmi_spd_sdi {
>  	HDMI_SPD_SDI_UNKNOWN,
> @@ -194,6 +197,9 @@ int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame,
>  			    const char *vendor, const char *product);
>  ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
>  				size_t size);
> +ssize_t hdmi_spd_infoframe_pack_only(const struct hdmi_spd_infoframe *frame,
> +				     void *buffer, size_t size);
> +int hdmi_spd_infoframe_check(struct hdmi_spd_infoframe *frame);
>  
>  enum hdmi_audio_coding_type {
>  	HDMI_AUDIO_CODING_TYPE_STREAM,
> @@ -272,6 +278,9 @@ struct hdmi_audio_infoframe {
>  int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame);
>  ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
>  				  void *buffer, size_t size);
> +ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
> +				       void *buffer, size_t size);
> +int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame);
>  
>  enum hdmi_3d_structure {
>  	HDMI_3D_STRUCTURE_INVALID = -1,
> @@ -299,6 +308,9 @@ struct hdmi_vendor_infoframe {
>  int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame);
>  ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
>  				   void *buffer, size_t size);
> +ssize_t hdmi_vendor_infoframe_pack_only(const struct hdmi_vendor_infoframe *frame,
> +					void *buffer, size_t size);
> +int hdmi_vendor_infoframe_check(struct hdmi_vendor_infoframe *frame);
>  
>  union hdmi_vendor_any_infoframe {
>  	struct {
> @@ -330,8 +342,11 @@ union hdmi_infoframe {
>  	struct hdmi_audio_infoframe audio;
>  };
>  
> -ssize_t
> -hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, size_t size);
> +ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer,
> +			    size_t size);
> +ssize_t hdmi_infoframe_pack_only(const union hdmi_infoframe *frame,
> +				 void *buffer, size_t size);
> +int hdmi_infoframe_check(union hdmi_infoframe *frame);
>  int hdmi_infoframe_unpack(union hdmi_infoframe *frame,
>  			  const void *buffer, size_t size);
>  void hdmi_infoframe_log(const char *level, struct device *dev,
> -- 
> 2.16.4

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-10-01 19:10 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-20 18:51 [PATCH 00/18] drm/i915: Infoframe precompute/check Ville Syrjala
2018-09-20 18:51 ` [PATCH 01/18] video/hdmi: Constify 'buffer' to the unpack functions Ville Syrjala
2018-09-21  8:03   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 02/18] video/hdmi: Pass buffer size to infoframe " Ville Syrjala
2018-09-21  8:06   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 03/18] video/hdmi: Constify infoframe passed to the log functions Ville Syrjala
2018-09-21  8:06   ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 04/18] video/hdmi: Constify infoframe passed to the pack functions Ville Syrjala
2018-09-21  8:24   ` Hans Verkuil
2018-09-21 14:30     ` Ville Syrjälä
2018-09-21 14:33   ` [PATCH v3 " Ville Syrjala
2018-10-01 19:10     ` Ville Syrjälä [this message]
2018-10-02  6:37       ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 05/18] video/hdmi: Add an enum for HDMI packet types Ville Syrjala
2018-09-21  8:41   ` Hans Verkuil
2018-09-21 14:01     ` Ville Syrjälä
2018-09-21 14:12       ` Hans Verkuil
2018-09-21 15:07         ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe Ville Syrjala
2018-09-21  8:28   ` Hans Verkuil
2018-09-21 13:53     ` Ville Syrjälä
2018-09-21 15:09   ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe Ville Syrjala
2018-09-21  8:30   ` Hans Verkuil
2018-09-21 13:54     ` Ville Syrjälä
2018-09-21 15:10   ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 08/18] drm/i915: Use memmove() for punching the hole into infoframes Ville Syrjala
2018-09-21 13:52   ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 09/18] drm/i915: Pass intel_encoder to infoframe functions Ville Syrjala
2018-09-21 13:59   ` Daniel Vetter
2018-09-21 15:03     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 10/18] drm/i915: Add the missing HDMI gamut metadata packet stuff Ville Syrjala
2018-09-21 14:15   ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 11/18] drm/i915: Return the mask of enabled infoframes from ->inforame_enabled() Ville Syrjala
2018-09-24 15:51   ` Daniel Vetter
2018-09-24 16:36     ` [Intel-gfx] " Ville Syrjälä
2018-10-01  6:55       ` Daniel Vetter
2018-10-01 19:29         ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 12/18] drm/i915: Store mask of enabled infoframes in the crtc state Ville Syrjala
2018-09-24 15:51   ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 13/18] drm/i915: Precompute HDMI infoframes Ville Syrjala
2018-09-24 15:58   ` Daniel Vetter
2018-09-24 16:42     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 14/18] drm/i915: Read out " Ville Syrjala
2018-09-24 16:08   ` Daniel Vetter
2018-09-24 16:52     ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 15/18] drm/i915/sdvo: Precompute " Ville Syrjala
2018-09-20 18:51 ` [PATCH 16/18] drm/i915/sdvo: Read out " Ville Syrjala
2018-09-24 16:10   ` [Intel-gfx] " Daniel Vetter
2018-09-24 17:13     ` Ville Syrjälä
2018-10-01  6:59       ` Daniel Vetter
2018-10-01 13:35         ` Ville Syrjälä
2018-10-01 16:48           ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 17/18] drm/i915: Check infoframe state in intel_pipe_config_compare() Ville Syrjala
2018-09-24 16:12   ` Daniel Vetter
2018-10-01 20:35     ` [Intel-gfx] " Ville Syrjälä
2018-10-02  8:16       ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 18/18] drm/i915: Include infoframes in the crtc state dump Ville Syrjala
2018-09-24 16:14   ` [Intel-gfx] " Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181001191037.GN9144@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hans.verkuil@cisco.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).