From: Daniel Vetter <daniel@ffwll.ch>
To: Deepak Rawat <drawat@vmware.com>
Cc: thellstrom@vmware.com, Daniel Vetter <daniel.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org,
linux-graphics-maintainer@vmware.com
Subject: Re: [PATCH v3 05/18] drm: Add helper to implement legacy dirtyfb
Date: Thu, 11 Oct 2018 18:15:47 +0200 [thread overview]
Message-ID: <20181011161547.GH31561@phenom.ffwll.local> (raw)
In-Reply-To: <20181011001657.1715-5-drawat@vmware.com>
On Wed, Oct 10, 2018 at 05:16:44PM -0700, Deepak Rawat wrote:
> From: Rob Clark <robdclark@gmail.com>
>
> Add an atomic helper to implement dirtyfb support. This is needed to
> support DSI command-mode panels with x11 userspace (ie. when we can't
> rely on pageflips to trigger a flush to the panel).
>
> v2: Modified the helper to use plane fb_damage_clips property and
> removed plane_state::dirty flag.
>
> v3:
> - Use uapi drm_mode_rect.
> - Support annotate flags.
>
> v4: Correct kernel doc.
>
> Cc: ville.syrjala@linux.intel.com
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Pekka Paalanen <ppaalanen@gmail.com>
> Cc: Daniel Stone <daniel@fooishbar.org>
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> Signed-off-by: Deepak Rawat <drawat@vmware.com>
> ---
> drivers/gpu/drm/drm_damage_helper.c | 124 ++++++++++++++++++++++++++++
> include/drm/drm_damage_helper.h | 4 +
> 2 files changed, 128 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_damage_helper.c b/drivers/gpu/drm/drm_damage_helper.c
> index e80fa6e08a99..fdb5a072d7e9 100644
> --- a/drivers/gpu/drm/drm_damage_helper.c
> +++ b/drivers/gpu/drm/drm_damage_helper.c
> @@ -26,6 +26,7 @@
> *
> * Authors:
> * Deepak Rawat <drawat@vmware.com>
> + * Rob Clark <robdclark@gmail.com>
> *
> **************************************************************************/
>
> @@ -70,6 +71,21 @@
> * rectangles clipped to &drm_plane_state.src.
> */
>
> +static void convert_clip_rect_to_rect(const struct drm_clip_rect *src,
> + struct drm_mode_rect *dest,
> + uint32_t num_clips, uint32_t src_inc)
> +{
> + while (num_clips > 0) {
> + dest->x1 = src->x1;
> + dest->y1 = src->y1;
> + dest->x2 = src->x2;
> + dest->y2 = src->y2;
> + src += src_inc;
> + dest++;
> + num_clips--;
> + }
> +}
> +
> /**
> * drm_plane_enable_fb_damage_clips - Enables plane fb damage clips property.
> * @plane: Plane on which to enable damage clips property.
> @@ -123,6 +139,114 @@ void drm_atomic_helper_check_plane_damage(struct drm_atomic_state *state,
> }
> EXPORT_SYMBOL(drm_atomic_helper_check_plane_damage);
>
> +/**
> + * drm_atomic_helper_dirtyfb - Helper for dirtyfb.
> + * @fb: DRM framebuffer.
> + * @file_priv: Drm file for the ioctl call.
> + * @flags: Dirty fb annotate flags.
> + * @color: Color for annotate fill.
> + * @clips: Dirty region.
> + * @num_clips: Count of clip in clips.
> + *
> + * A helper to implement &drm_framebuffer_funcs::dirty using damage interface
s/::/./ to make the kerneldoc work.
> + * during plane update. If num_clips is 0 then this helper will do a full plane
> + * update. This is the same behaviour expected by dirtyfb ioctl().
I think usually we all-uppercase DIRTFB IOCTL, but this is also ok I
think.
With this addressed:
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> + *
> + * Note that this helper is blocking implementation. This is because current
> + * user of this helper is vmwgfx which needs blocking.
> + *
> + * Return: Zero on success, negative errno on failure.
> + */
> +int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb,
> + struct drm_file *file_priv, unsigned flags,
> + unsigned color, struct drm_clip_rect *clips,
> + unsigned num_clips)
> +{
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_property_blob *damage = NULL;
> + struct drm_mode_rect *rects = NULL;
> + struct drm_atomic_state *state;
> + struct drm_plane *plane;
> + int ret = 0;
> +
> + /*
> + * When called from ioctl, we are interruptable, but not when called
> + * internally (ie. defio worker)
> + */
> + drm_modeset_acquire_init(&ctx,
> + file_priv ? DRM_MODESET_ACQUIRE_INTERRUPTIBLE : 0);
> +
> + state = drm_atomic_state_alloc(fb->dev);
> + if (!state) {
> + ret = -ENOMEM;
> + goto out;
> + }
> + state->acquire_ctx = &ctx;
> +
> + if (clips) {
> + uint32_t inc = 1;
> +
> + if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY) {
> + inc = 2;
> + num_clips /= 2;
> + }
> +
> + rects = kcalloc(num_clips, sizeof(*rects), GFP_KERNEL);
> + if (!rects) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + convert_clip_rect_to_rect(clips, rects, num_clips, inc);
> + damage = drm_property_create_blob(fb->dev,
> + num_clips * sizeof(*rects),
> + rects);
> + if (IS_ERR(damage)) {
> + ret = PTR_ERR(damage);
> + damage = NULL;
> + goto out;
> + }
> + }
> +
> +retry:
> + drm_for_each_plane(plane, fb->dev) {
> + struct drm_plane_state *plane_state;
> +
> + if (plane->state->fb != fb)
> + continue;
> +
> + plane_state = drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto out;
> + }
> +
> + drm_property_replace_blob(&plane_state->fb_damage_clips,
> + damage);
> + }
> +
> + ret = drm_atomic_commit(state);
> +
> +out:
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + ret = drm_modeset_backoff(&ctx);
> + if (!ret)
> + goto retry;
> + }
> +
> + drm_property_blob_put(damage);
> + kfree(rects);
> + drm_atomic_state_put(state);
> +
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> +
> + return ret;
> +
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_dirtyfb);
> +
> /**
> * drm_atomic_helper_damage_iter_init - Initialize the damage iterator.
> * @iter: The iterator to initialize.
> diff --git a/include/drm/drm_damage_helper.h b/include/drm/drm_damage_helper.h
> index b9a0d05fb093..82a7128c9f97 100644
> --- a/include/drm/drm_damage_helper.h
> +++ b/include/drm/drm_damage_helper.h
> @@ -67,6 +67,10 @@ struct drm_atomic_helper_damage_iter {
> void drm_plane_enable_fb_damage_clips(struct drm_plane *plane);
> void drm_atomic_helper_check_plane_damage(struct drm_atomic_state *state,
> struct drm_plane_state *plane_state);
> +int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb,
> + struct drm_file *file_priv, unsigned flags,
> + unsigned color, struct drm_clip_rect *clips,
> + unsigned num_clips);
> void
> drm_atomic_helper_damage_iter_init(struct drm_atomic_helper_damage_iter *iter,
> const struct drm_plane_state *old_state,
> --
> 2.17.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-10-11 16:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 0:16 [PATCH v3 01/18] drm: Add a new plane property to send damage during plane update Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 02/18] drm: Add a new helper to validate damage during atomic_check Deepak Rawat
2018-10-15 22:01 ` Sinclair Yeh
2018-10-11 0:16 ` [PATCH v3 03/18] drm: Add helper iterator functions for plane fb_damage_clips blob Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 04/18] drm/selftest: Add drm damage helper selftest Deepak Rawat
2018-10-11 16:23 ` Daniel Vetter
2018-10-15 16:11 ` Deepak Singh Rawat
2018-10-16 12:21 ` Daniel Vetter
2018-10-16 12:52 ` Alexandru-Cosmin Gheorghe
2018-10-16 16:14 ` Deepak Singh Rawat
2018-10-16 16:00 ` Deepak Singh Rawat
2018-10-11 0:16 ` [PATCH v3 05/18] drm: Add helper to implement legacy dirtyfb Deepak Rawat
2018-10-11 16:15 ` Daniel Vetter [this message]
2018-10-11 16:21 ` Daniel Vetter
2018-10-11 0:16 ` [PATCH v3 06/18] drm/vmwgfx: Add a new interface for plane update on a display unit Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 07/18] drm/vmwgfx: Implement STDU plane update for surface backed fb Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 08/18] drm/vmwgfx: Implement STDU plane update for BO " Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 09/18] drm/vmwgfx: Use the new interface for STDU plane update Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 10/18] drm/vmwgfx: Updated comment for stdu " Deepak Rawat
2018-10-15 13:09 ` Thomas Hellstrom
2018-10-11 0:16 ` [PATCH v3 11/18] drm/vmwgfx: Enable FB_DAMAGE_CLIPS property for STDU primary plane Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 12/18] drm/vmwgfx: Implement SOU plane update for surface backed fb Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 13/18] drm/vmwgfx: Implement SOU plane update for BO " Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 14/18] drm/vmwgfx: Use the new interface for SOU plane update Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 15/18] drm/vmwgfx: Update comments for sou plane update function Deepak Rawat
2018-10-15 13:10 ` Thomas Hellstrom
2018-10-11 0:16 ` [PATCH v3 16/18] drm/vmwgfx: Enable FB_DAMAGE_CLIPS property for SOU primary plane Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 17/18] drm/vmwgfx: Use atomic helper function for dirty fb IOCTL Deepak Rawat
2018-10-11 0:16 ` [PATCH v3 18/18] drm/vmwgfx: Don't clear mode::type anymore Deepak Rawat
2018-10-15 13:12 ` Thomas Hellstrom
2018-10-15 13:15 ` [PATCH v3 01/18] drm: Add a new plane property to send damage during plane update Thomas Hellstrom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011161547.GH31561@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=daniel.vetter@ffwll.ch \
--cc=drawat@vmware.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-graphics-maintainer@vmware.com \
--cc=thellstrom@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox