Re: [PATCH v5 26/28] drm/i915/dsc: Enable and disable appropriate power wells for VDSC

[Manasi Navare <manasi.d.navare@intel.com>]

Hi Ville,

This adds a helper function to get the power well as per
the transcoder as per your suggestion.
Could you please review this one?

Regards
Manasi

On Fri, Oct 05, 2018 at 04:23:04PM -0700, Manasi Navare wrote:
> A separate power well 2 (PG2) is required for VDSC on eDP transcoder
> whereas all other transcoders use the power wells associated with the
> transcoders for VDSC.
> This patch adds a helper to obtain correct power domain depending on
> transcoder being used and enables/disables the power wells during
> VDSC enabling/disabling.
> 
> Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_vdsc.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
> index 4963e80a87f0..d2b4601459c3 100644
> --- a/drivers/gpu/drm/i915/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/intel_vdsc.c
> @@ -581,6 +581,23 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
>  	return 0;
>  }
>  
> +static enum intel_display_power_domain
> +intel_dsc_get_power_domains(struct intel_crtc_state *crtc_state)
> +{
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +
> +	/*
> +         * On ICL+ PW2/ POWER_DOMAIN_VDSC_PIPE_A is required for
> +         * VDSC/joining for eDP transcoder.
> +         * For any other transcoder, VDSC/joining uses the power well associated
> +         * with the pipe/transcoder in use.
> +         */
> +	if (cpu_transcoder == TRANSCODER_EDP)
> +		return POWER_DOMAIN_VDSC_PIPE_A;
> +	else
> +		return POWER_DOMAIN_TRANSCODER(cpu_transcoder);
> +}
> +
>  static void intel_configure_pps_for_dsc_encoder(struct intel_encoder *encoder,
>  						struct intel_crtc_state *crtc_state)
>  {
> @@ -1019,6 +1036,10 @@ void intel_dsc_enable(struct intel_encoder *encoder,
>  	if (!crtc_state->dsc_params.compression_enable)
>  		return;
>  
> +	/* Enable Power wells for VDSC/joining */
> +	intel_display_power_get(dev_priv,
> +				intel_dsc_get_power_domains(crtc_state));
> +
>  	intel_configure_pps_for_dsc_encoder(encoder, crtc_state);
>  
>  	intel_dp_send_dsc_pps_sdp(encoder, crtc_state);
> @@ -1073,4 +1094,8 @@ void intel_dsc_disable(struct intel_encoder *encoder,
>  				  RIGHT_BRANCH_VDSC_ENABLE);
>  	I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
>  
> +	/* Disable Power wells for VDSC/joining */
> +	intel_display_power_put(dev_priv,
> +				intel_dsc_get_power_domains(old_crtc_state));
> +
>  }
> -- 
> 2.18.0
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx