From: "Noralf Trønnes" <noralf@tronnes.org>
To: dri-devel@lists.freedesktop.org
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Subject: [PATCH v2 1/9] drm/arc: Use drm_fbdev_generic_setup()
Date: Thu, 25 Oct 2018 22:13:32 +0200 [thread overview]
Message-ID: <20181025201340.34227-2-noralf@tronnes.org> (raw)
In-Reply-To: <20181025201340.34227-1-noralf@tronnes.org>
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
---
Changes since version 1:
- Rebased
drivers/gpu/drm/arc/arcpgu.h | 4 ----
drivers/gpu/drm/arc/arcpgu_drv.c | 33 +++------------------------------
2 files changed, 3 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/arc/arcpgu.h b/drivers/gpu/drm/arc/arcpgu.h
index e8fcf3ab1d9a..90ef76b19f8a 100644
--- a/drivers/gpu/drm/arc/arcpgu.h
+++ b/drivers/gpu/drm/arc/arcpgu.h
@@ -20,7 +20,6 @@
struct arcpgu_drm_private {
void __iomem *regs;
struct clk *clk;
- struct drm_fbdev_cma *fbdev;
struct drm_framebuffer *fb;
struct drm_crtc crtc;
struct drm_plane *plane;
@@ -43,8 +42,5 @@ static inline u32 arc_pgu_read(struct arcpgu_drm_private *arcpgu,
int arc_pgu_setup_crtc(struct drm_device *dev);
int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np);
int arcpgu_drm_sim_init(struct drm_device *drm, struct device_node *np);
-struct drm_fbdev_cma *arcpgu_fbdev_cma_init(struct drm_device *dev,
- unsigned int preferred_bpp, unsigned int num_crtc,
- unsigned int max_conn_count);
#endif
diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
index e85e3a349f24..2af847ebca34 100644
--- a/drivers/gpu/drm/arc/arcpgu_drv.c
+++ b/drivers/gpu/drm/arc/arcpgu_drv.c
@@ -17,6 +17,7 @@
#include <linux/clk.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_atomic_helper.h>
@@ -25,16 +26,8 @@
#include "arcpgu.h"
#include "arcpgu_regs.h"
-static void arcpgu_fb_output_poll_changed(struct drm_device *dev)
-{
- struct arcpgu_drm_private *arcpgu = dev->dev_private;
-
- drm_fbdev_cma_hotplug_event(arcpgu->fbdev);
-}
-
static const struct drm_mode_config_funcs arcpgu_drm_modecfg_funcs = {
.fb_create = drm_gem_fb_create,
- .output_poll_changed = arcpgu_fb_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
@@ -51,13 +44,6 @@ static void arcpgu_setup_mode_config(struct drm_device *drm)
DEFINE_DRM_GEM_CMA_FOPS(arcpgu_drm_ops);
-static void arcpgu_lastclose(struct drm_device *drm)
-{
- struct arcpgu_drm_private *arcpgu = drm->dev_private;
-
- drm_fbdev_cma_restore_mode(arcpgu->fbdev);
-}
-
static int arcpgu_load(struct drm_device *drm)
{
struct platform_device *pdev = to_platform_device(drm->dev);
@@ -113,26 +99,12 @@ static int arcpgu_load(struct drm_device *drm)
drm_mode_config_reset(drm);
drm_kms_helper_poll_init(drm);
- arcpgu->fbdev = drm_fbdev_cma_init(drm, 16,
- drm->mode_config.num_connector);
- if (IS_ERR(arcpgu->fbdev)) {
- ret = PTR_ERR(arcpgu->fbdev);
- arcpgu->fbdev = NULL;
- return -ENODEV;
- }
-
platform_set_drvdata(pdev, drm);
return 0;
}
static int arcpgu_unload(struct drm_device *drm)
{
- struct arcpgu_drm_private *arcpgu = drm->dev_private;
-
- if (arcpgu->fbdev) {
- drm_fbdev_cma_fini(arcpgu->fbdev);
- arcpgu->fbdev = NULL;
- }
drm_kms_helper_poll_fini(drm);
drm_atomic_helper_shutdown(drm);
drm_mode_config_cleanup(drm);
@@ -168,7 +140,6 @@ static int arcpgu_debugfs_init(struct drm_minor *minor)
static struct drm_driver arcpgu_drm_driver = {
.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
DRIVER_ATOMIC,
- .lastclose = arcpgu_lastclose,
.name = "arcpgu",
.desc = "ARC PGU Controller",
.date = "20160219",
@@ -211,6 +182,8 @@ static int arcpgu_probe(struct platform_device *pdev)
if (ret)
goto err_unload;
+ drm_fbdev_generic_setup(drm, 16);
+
return 0;
err_unload:
--
2.15.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-10-25 20:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-25 20:13 [PATCH v2 0/9] drm/cma-helper drivers: Use drm_fbdev_generic_setup() Noralf Trønnes
2018-10-25 20:13 ` Noralf Trønnes [this message]
2018-11-01 14:34 ` [PATCH v2 1/9] drm/arc: " Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 2/9] drm/fsl-dcu: " Noralf Trønnes
2018-11-01 14:34 ` Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 3/9] drm/hisilicon/kirin: " Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 4/9] drm/mxsfb: " Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 5/9] drm/rcar-du: " Noralf Trønnes
2018-11-20 14:21 ` Noralf Trønnes
2018-11-28 17:03 ` Noralf Trønnes
2018-11-28 18:56 ` Laurent Pinchart
2018-10-25 20:13 ` [PATCH v2 6/9] drm/atmel-hlcdc: " Noralf Trønnes
2018-10-25 20:25 ` Boris Brezillon
2018-11-01 14:35 ` Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 7/9] drm/sun4i: " Noralf Trønnes
2018-10-26 8:27 ` Maxime Ripard
2018-11-01 14:35 ` Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 8/9] drm/tilcdc: " Noralf Trønnes
2018-10-29 15:55 ` Jyri Sarha
2018-11-01 14:35 ` Noralf Trønnes
2018-10-25 20:13 ` [PATCH v2 9/9] drm/cma-helper: Remove unused fbdev code Noralf Trønnes
2018-11-28 19:45 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181025201340.34227-2-noralf@tronnes.org \
--to=noralf@tronnes.org \
--cc=abrodkin@synopsys.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox