From: Sean Paul <sean-p7yTbzM4H96eqtR555YLDQ@public.gmane.org>
To: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit
Date: Fri, 16 Nov 2018 16:37:26 -0500 [thread overview]
Message-ID: <20181116213726.GA154160@art_vandelay> (raw)
In-Reply-To: <20181116213526.GZ154160@art_vandelay>
On Fri, Nov 16, 2018 at 04:35:26PM -0500, Sean Paul wrote:
> On Fri, Nov 16, 2018 at 11:22:21AM -0800, Jeykumar Sankaran wrote:
> > Add encoder interface to release dpu encoder
> > on mode_init failures in kms.
> >
> > Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> > ---
> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 ++++++++++--
> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 6 ++++++
> > 2 files changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index dd7ab85..b253165 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -422,6 +422,15 @@ void dpu_encoder_get_hw_resources(struct drm_encoder *drm_enc,
> > }
> > }
> >
> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc)
> > +{
> > + struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> > +
> > + drm_encoder_cleanup(drm_enc);
> > +
> > + kfree(dpu_enc);
> > +}
> > +
> > static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
> > {
> > struct dpu_encoder_virt *dpu_enc = NULL;
> > @@ -453,10 +462,9 @@ static void dpu_encoder_destroy(struct drm_encoder *drm_enc)
> > dpu_enc->num_phys_encs = 0;
> > mutex_unlock(&dpu_enc->enc_lock);
> >
> > - drm_encoder_cleanup(drm_enc);
> > mutex_destroy(&dpu_enc->enc_lock);
> >
> > - kfree(dpu_enc);
> > + dpu_encoder_uninit(drm_enc);
> > }
> >
> > void dpu_encoder_helper_split_config(
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > index 9dbf38f..60b88bd 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> > @@ -142,6 +142,12 @@ struct drm_encoder *dpu_encoder_init(
> > int drm_enc_mode);
> >
> > /**
> > + * dpu_encoder_uninit - uninitialize virtual encoder object
> > + * @drm_enc: Pointer to drm encoder
> > + */
> > +void dpu_encoder_uninit(struct drm_encoder *drm_enc);
>
> Just make it static?
I just saw YueHaibing's patch to remove the kfree entirely since dpu_enc is
devm_* managed. IMO, that'd be a better solution than this.
Sean
>
> > +
> > +/**
> > * dpu_encoder_setup - setup dpu_encoder for the display probed
> > * @dev: Pointer to drm device structure
> > * @enc: Pointer to the drm_encoder
> > --
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > a Linux Foundation Collaborative Project
> >
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-11-16 21:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-16 19:22 [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit Jeykumar Sankaran
2018-11-16 19:22 ` [PATCH 2/2] drm/msm/dpu: add display port support in DPU Jeykumar Sankaran
2018-11-16 20:33 ` Jordan Crouse
[not found] ` <1542396142-19534-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-11-16 21:35 ` [PATCH 1/2] drm/msm/dpu: add dpu encoder uninit Sean Paul
2018-11-16 21:37 ` Sean Paul [this message]
2018-11-19 18:50 ` Jeykumar Sankaran
2018-11-19 18:48 ` Jeykumar Sankaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181116213726.GA154160@art_vandelay \
--to=sean-p7ytbzm4h96eqtr555yldq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox