From: Daniel Thompson <daniel.thompson@linaro.org>
To: Alexander Shiyan <shc_work@mail.ru>
Cc: linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Jingoo Han <jingoohan1@gmail.com>,
dri-devel@lists.freedesktop.org,
Thierry Reding <thierry.reding@gmail.com>,
Lee Jones <lee.jones@linaro.org>
Subject: Re: [PATCH 2/2] video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies
Date: Mon, 17 Dec 2018 12:09:07 +0000 [thread overview]
Message-ID: <20181217120907.wwffekinslibnzvt@holly.lan> (raw)
In-Reply-To: <20181216050247.30043-2-shc_work@mail.ru>
On Sun, Dec 16, 2018 at 08:02:47AM +0300, Alexander Shiyan wrote:
> This patch removes dependencies on BACKLIGHT_CLASS_DEVICE for items
> that are already placed under #ifdef BACKLIGHT_CLASS_DEVICE.
s/#ifdef/if/
Once that is fixed:
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> drivers/video/backlight/Kconfig | 25 ++++++++++++-------------
> 1 file changed, 12 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 3fdc18e..3ed1d90 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -193,7 +193,6 @@ config BACKLIGHT_IPAQ_MICRO
>
> config BACKLIGHT_LM3533
> tristate "Backlight Driver for LM3533"
> - depends on BACKLIGHT_CLASS_DEVICE
> depends on MFD_LM3533
> help
> Say Y to enable the backlight driver for National Semiconductor / TI
> @@ -317,7 +316,7 @@ config BACKLIGHT_ADP5520
>
> config BACKLIGHT_ADP8860
> tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
> - depends on BACKLIGHT_CLASS_DEVICE && I2C
> + depends on I2C
> select NEW_LEDS
> select LEDS_CLASS
> help
> @@ -329,7 +328,7 @@ config BACKLIGHT_ADP8860
>
> config BACKLIGHT_ADP8870
> tristate "Backlight Driver for ADP8870 using WLED"
> - depends on BACKLIGHT_CLASS_DEVICE && I2C
> + depends on I2C
> select NEW_LEDS
> select LEDS_CLASS
> help
> @@ -347,28 +346,28 @@ config BACKLIGHT_88PM860X
>
> config BACKLIGHT_PCF50633
> tristate "Backlight driver for NXP PCF50633 MFD"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
> + depends on MFD_PCF50633
> help
> If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
> enable its driver.
>
> config BACKLIGHT_AAT2870
> tristate "AnalogicTech AAT2870 Backlight"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
> + depends on MFD_AAT2870_CORE
> help
> If you have a AnalogicTech AAT2870 say Y to enable the
> backlight driver.
>
> config BACKLIGHT_LM3630A
> tristate "Backlight Driver for LM3630A"
> - depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM
> + depends on I2C && PWM
> select REGMAP_I2C
> help
> This supports TI LM3630A Backlight Driver
>
> config BACKLIGHT_LM3639
> tristate "Backlight Driver for LM3639"
> - depends on BACKLIGHT_CLASS_DEVICE && I2C
> + depends on I2C
> select REGMAP_I2C
> select NEW_LEDS
> select LEDS_CLASS
> @@ -377,20 +376,20 @@ config BACKLIGHT_LM3639
>
> config BACKLIGHT_LP855X
> tristate "Backlight driver for TI LP855X"
> - depends on BACKLIGHT_CLASS_DEVICE && I2C && PWM
> + depends on I2C && PWM
> help
> This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and
> LP8557 backlight driver.
>
> config BACKLIGHT_LP8788
> tristate "Backlight driver for TI LP8788 MFD"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788 && PWM
> + depends on MFD_LP8788 && PWM
> help
> This supports TI LP8788 backlight driver.
>
> config BACKLIGHT_OT200
> tristate "Backlight driver for ot200 visualisation device"
> - depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
> + depends on CS5535_MFGPT && GPIO_CS5535
> help
> To compile this driver as a module, choose M here: the module will be
> called ot200_bl.
> @@ -404,7 +403,7 @@ config BACKLIGHT_PANDORA
>
> config BACKLIGHT_SKY81452
> tristate "Backlight driver for SKY81452"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_SKY81452
> + depends on MFD_SKY81452
> help
> If you have a Skyworks SKY81452, say Y to enable the
> backlight driver.
> @@ -414,14 +413,14 @@ config BACKLIGHT_SKY81452
>
> config BACKLIGHT_TPS65217
> tristate "TPS65217 Backlight"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
> + depends on MFD_TPS65217
> help
> If you have a Texas Instruments TPS65217 say Y to enable the
> backlight driver.
>
> config BACKLIGHT_AS3711
> tristate "AS3711 Backlight"
> - depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
> + depends on MFD_AS3711
> help
> If you have an Austrian Microsystems AS3711 say Y to enable the
> backlight driver.
> --
> 2.10.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-12-17 12:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-16 5:02 [PATCH 1/2] video: lcd: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol Alexander Shiyan
2018-12-16 5:02 ` [PATCH 2/2] video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies Alexander Shiyan
2018-12-17 12:09 ` Daniel Thompson [this message]
2018-12-18 17:21 ` [PATCH 1/2] video: lcd: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol Daniel Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181217120907.wwffekinslibnzvt@holly.lan \
--to=daniel.thompson@linaro.org \
--cc=b.zolnierkie@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=shc_work@mail.ru \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox