dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org, linux-tegra@vger.kernel.org,
	Sameer Pujar <spujar@nvidia.com>,
	Mohan Kumar <mkumard@nvidia.com>, Ujwal Patel <ujwalp@nvidia.com>
Subject: [PATCH 3/3] drm/tegra: hdmi: Reuse common HDA format parser
Date: Thu,  3 Jan 2019 15:23:17 +0100	[thread overview]
Message-ID: <20190103142317.26124-3-thierry.reding@gmail.com> (raw)
In-Reply-To: <20190103142317.26124-1-thierry.reding@gmail.com>

From: Thierry Reding <treding@nvidia.com>

Eliminate some duplicate code by reusing the HDA format parser already
used by the SOR.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/gpu/drm/tegra/hdmi.c | 43 +++++++-----------------------------
 1 file changed, 8 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c
index d19973945614..8fdff801c6f2 100644
--- a/drivers/gpu/drm/tegra/hdmi.c
+++ b/drivers/gpu/drm/tegra/hdmi.c
@@ -20,8 +20,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 
-#include <sound/hda_verbs.h>
-
+#include "hda.h"
 #include "hdmi.h"
 #include "drm.h"
 #include "dc.h"
@@ -69,8 +68,7 @@ struct tegra_hdmi {
 	const struct tegra_hdmi_config *config;
 
 	unsigned int audio_source;
-	unsigned int audio_sample_rate;
-	unsigned int audio_channels;
+	struct tegra_hda_format format;
 
 	unsigned int pixel_clock;
 	bool stereo;
@@ -508,7 +506,7 @@ static void tegra_hdmi_write_aval(struct tegra_hdmi *hdmi, u32 value)
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i].sample_rate == hdmi->audio_sample_rate) {
+		if (regs[i].sample_rate == hdmi->format.sample_rate) {
 			tegra_hdmi_writel(hdmi, value, regs[i].offset);
 			break;
 		}
@@ -562,7 +560,7 @@ static int tegra_hdmi_setup_audio(struct tegra_hdmi *hdmi)
 		 * play back system startup sounds early. It is possibly not
 		 * needed on Linux at all.
 		 */
-		if (hdmi->audio_channels == 2)
+		if (hdmi->format.channels == 2)
 			value = SOR_AUDIO_CNTRL0_INJECT_NULLSMPL;
 		else
 			value = 0;
@@ -593,12 +591,12 @@ static int tegra_hdmi_setup_audio(struct tegra_hdmi *hdmi)
 		tegra_hdmi_writel(hdmi, value, HDMI_NV_PDISP_SOR_AUDIO_SPARE0);
 	}
 
-	config = tegra_hdmi_get_audio_config(hdmi->audio_sample_rate,
+	config = tegra_hdmi_get_audio_config(hdmi->format.sample_rate,
 					     hdmi->pixel_clock);
 	if (!config) {
 		dev_err(hdmi->dev,
 			"cannot set audio to %u Hz at %u Hz pixel clock\n",
-			hdmi->audio_sample_rate, hdmi->pixel_clock);
+			hdmi->format.sample_rate, hdmi->pixel_clock);
 		return -EINVAL;
 	}
 
@@ -785,7 +783,7 @@ static void tegra_hdmi_setup_audio_infoframe(struct tegra_hdmi *hdmi)
 		return;
 	}
 
-	frame.channels = hdmi->audio_channels;
+	frame.channels = hdmi->format.channels;
 
 	err = hdmi_audio_infoframe_pack(&frame, buffer, sizeof(buffer));
 	if (err < 0) {
@@ -1587,24 +1585,6 @@ static const struct of_device_id tegra_hdmi_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra_hdmi_of_match);
 
-static void hda_format_parse(unsigned int format, unsigned int *rate,
-			     unsigned int *channels)
-{
-	unsigned int mul, div;
-
-	if (format & AC_FMT_BASE_44K)
-		*rate = 44100;
-	else
-		*rate = 48000;
-
-	mul = (format & AC_FMT_MULT_MASK) >> AC_FMT_MULT_SHIFT;
-	div = (format & AC_FMT_DIV_MASK) >> AC_FMT_DIV_SHIFT;
-
-	*rate = *rate * (mul + 1) / (div + 1);
-
-	*channels = (format & AC_FMT_CHAN_MASK) >> AC_FMT_CHAN_SHIFT;
-}
-
 static irqreturn_t tegra_hdmi_irq(int irq, void *data)
 {
 	struct tegra_hdmi *hdmi = data;
@@ -1621,14 +1601,9 @@ static irqreturn_t tegra_hdmi_irq(int irq, void *data)
 		value = tegra_hdmi_readl(hdmi, HDMI_NV_PDISP_SOR_AUDIO_HDA_CODEC_SCRATCH0);
 
 		if (value & SOR_AUDIO_HDA_CODEC_SCRATCH0_VALID) {
-			unsigned int sample_rate, channels;
-
 			format = value & SOR_AUDIO_HDA_CODEC_SCRATCH0_FMT_MASK;
 
-			hda_format_parse(format, &sample_rate, &channels);
-
-			hdmi->audio_sample_rate = sample_rate;
-			hdmi->audio_channels = channels;
+			tegra_hda_parse_format(format, &hdmi->format);
 
 			err = tegra_hdmi_setup_audio(hdmi);
 			if (err < 0) {
@@ -1662,8 +1637,6 @@ static int tegra_hdmi_probe(struct platform_device *pdev)
 	hdmi->dev = &pdev->dev;
 
 	hdmi->audio_source = AUTO;
-	hdmi->audio_sample_rate = 48000;
-	hdmi->audio_channels = 2;
 	hdmi->stereo = false;
 	hdmi->dvi = false;
 
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2019-01-03 14:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-03 14:23 [PATCH 1/3] drm/tegra: sor: Parse more data from HDA format Thierry Reding
2019-01-03 14:23 ` [PATCH 2/3] drm/tegra: hda: Extract HDA format parsing code Thierry Reding
2019-01-03 14:23 ` Thierry Reding [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190103142317.26124-3-thierry.reding@gmail.com \
    --to=thierry.reding@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mkumard@nvidia.com \
    --cc=spujar@nvidia.com \
    --cc=ujwalp@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox