From: Christoph Hellwig <hch@lst.de>
To: thellstrom@vmware.com
Cc: iommu@lists.linux-foundation.org,
linux-graphics-maintainer@vmware.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 2/4] drm/vmwgfx: remove CONFIG_INTEL_IOMMU ifdefs
Date: Sat, 5 Jan 2019 09:01:06 +0100 [thread overview]
Message-ID: <20190105080108.14837-3-hch@lst.de> (raw)
In-Reply-To: <20190105080108.14837-1-hch@lst.de>
intel_iommu_enabled is defined as always false for !CONFIG_INTEL_IOMMU,
so remove the ifdefs around it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 69e325b2d954..236052ad233c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -567,12 +567,10 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv)
[vmw_dma_map_bind] = "Giving up DMA mappings early."};
const struct dma_map_ops *dma_ops = get_dma_ops(dev_priv->dev->dev);
-#ifdef CONFIG_INTEL_IOMMU
if (intel_iommu_enabled) {
dev_priv->map_mode = vmw_dma_map_populate;
goto out_fixup;
}
-#endif
if (!(vmw_force_iommu || vmw_force_coherent)) {
dev_priv->map_mode = vmw_dma_phys;
@@ -589,9 +587,7 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv)
dev_priv->map_mode = vmw_dma_map_populate;
#endif
-#ifdef CONFIG_INTEL_IOMMU
out_fixup:
-#endif
if (dev_priv->map_mode == vmw_dma_map_populate &&
vmw_restrict_iommu)
dev_priv->map_mode = vmw_dma_map_bind;
@@ -599,13 +595,6 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv)
if (vmw_force_coherent)
dev_priv->map_mode = vmw_dma_alloc_coherent;
-#if !defined(CONFIG_SWIOTLB) && !defined(CONFIG_INTEL_IOMMU)
- /*
- * No coherent page pool
- */
- if (dev_priv->map_mode == vmw_dma_alloc_coherent)
- return -EINVAL;
-#endif
DRM_INFO("DMA map mode: %s\n", names[dev_priv->map_mode]);
return 0;
@@ -619,7 +608,6 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv)
* With 32-bit we can only handle 32 bit PFNs. Optionally set that
* restriction also for 64-bit systems.
*/
-#ifdef CONFIG_INTEL_IOMMU
static int vmw_dma_masks(struct vmw_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
@@ -631,12 +619,6 @@ static int vmw_dma_masks(struct vmw_private *dev_priv)
}
return 0;
}
-#else
-static int vmw_dma_masks(struct vmw_private *dev_priv)
-{
- return 0;
-}
-#endif
static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
{
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-01-05 8:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-05 8:01 fix DMA ops layering violations in vmwgfx Christoph Hellwig
2019-01-05 8:01 ` [PATCH 1/4] drm/vmwgfx: remove CONFIG_X86 ifdefs Christoph Hellwig
2019-01-05 8:01 ` Christoph Hellwig [this message]
2019-01-08 10:03 ` [PATCH 2/4] drm/vmwgfx: remove CONFIG_INTEL_IOMMU ifdefs Thomas Hellstrom
[not found] ` <20190105080108.14837-3-hch-jcswGhMUV9g@public.gmane.org>
2019-01-08 10:55 ` Thomas Hellstrom
2019-01-05 8:01 ` [PATCH 3/4] drm/vmwgfx: fix the check when to use dma_alloc_coherent Christoph Hellwig
2019-01-05 8:01 ` [PATCH 4/4] drm/vmwgfx: unwind spaghetti code in vmw_dma_select_mode Christoph Hellwig
[not found] ` <20190105080108.14837-5-hch-jcswGhMUV9g@public.gmane.org>
2019-01-08 10:56 ` Thomas Hellstrom
2019-01-08 9:51 ` fix DMA ops layering violations in vmwgfx Thomas Hellstrom
[not found] ` <99091bb861e21d5bb4182f08dedbc494c637cc0f.camel-pghWNbHTmq7QT0dZR+AlfA@public.gmane.org>
2019-01-08 13:12 ` hch-jcswGhMUV9g
[not found] ` <20190108131227.GB6003-jcswGhMUV9g@public.gmane.org>
2019-01-08 18:25 ` Thomas Hellstrom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190105080108.14837-3-hch@lst.de \
--to=hch@lst.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-graphics-maintainer@vmware.com \
--cc=linux-kernel@vger.kernel.org \
--cc=thellstrom@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox