From: Lyude Paul <lyude@redhat.com>
To: dri-devel@lists.freedesktop.org, amd-gfx@lists.freedesktop.org,
nouveau@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
Jerry Zuo <Jerry.Zuo@amd.com>, David Airlie <airlied@redhat.com>,
Harry Wentland <harry.wentland@amd.com>
Subject: [PATCH v6 20/20] drm/nouveau: Use atomic VCPI helpers for MST
Date: Thu, 10 Jan 2019 14:57:54 -0500 [thread overview]
Message-ID: <20190110195753.6234-21-lyude@redhat.com> (raw)
In-Reply-To: <20190110195753.6234-1-lyude@redhat.com>
Currently, nouveau uses the yolo method of setting up MST displays: it
uses the old VCPI helpers (drm_dp_find_vcpi_slots()) for computing the
display configuration. These helpers don't take care to make sure they
take a reference to the mstb port that they're checking, and
additionally don't actually check whether or not the topology still has
enough bandwidth to provide the VCPI tokens required.
So, drop usage of the old helpers and move entirely over to the atomic
helpers.
Changes since v6:
* Cleanup atomic check logic and remove a bunch of unneeded checks -
danvet
Changes since v5:
* Update nv50_msto_atomic_check() and nv50_mstc_atomic_check() to the
new requirements for drm_dp_atomic_find_vcpi_slots() and
drm_dp_atomic_release_vcpi_slots()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
---
drivers/gpu/drm/nouveau/dispnv50/disp.c | 54 ++++++++++++++++++++++---
1 file changed, 48 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c
index 8044ebba56a4..67107f0b1299 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -761,16 +761,23 @@ nv50_msto_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
- struct nv50_mstc *mstc = nv50_mstc(conn_state->connector);
+ struct drm_atomic_state *state = crtc_state->state;
+ struct drm_connector *connector = conn_state->connector;
+ struct nv50_mstc *mstc = nv50_mstc(connector);
struct nv50_mstm *mstm = mstc->mstm;
- int bpp = conn_state->connector->display_info.bpc * 3;
+ int bpp = connector->display_info.bpc * 3;
int slots;
- mstc->pbn = drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock, bpp);
+ mstc->pbn = drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock,
+ bpp);
- slots = drm_dp_find_vcpi_slots(&mstm->mgr, mstc->pbn);
- if (slots < 0)
- return slots;
+ if (drm_atomic_crtc_needs_modeset(crtc_state) &&
+ !drm_connector_is_unregistered(connector)) {
+ slots = drm_dp_atomic_find_vcpi_slots(state, &mstm->mgr,
+ mstc->port, mstc->pbn);
+ if (slots < 0)
+ return slots;
+ }
return nv50_outp_atomic_check_view(encoder, crtc_state, conn_state,
mstc->native);
@@ -933,12 +940,43 @@ nv50_mstc_get_modes(struct drm_connector *connector)
return ret;
}
+static int
+nv50_mstc_atomic_check(struct drm_connector *connector,
+ struct drm_connector_state *new_conn_state)
+{
+ struct drm_atomic_state *state = new_conn_state->state;
+ struct nv50_mstc *mstc = nv50_mstc(connector);
+ struct drm_dp_mst_topology_mgr *mgr = &mstc->mstm->mgr;
+ struct drm_connector_state *old_conn_state =
+ drm_atomic_get_old_connector_state(state, connector);
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *new_crtc = new_conn_state->crtc;
+
+ if (!old_conn_state->crtc)
+ return 0;
+
+ /* We only want to free VCPI if this state disables the CRTC on this
+ * connector
+ */
+ if (new_crtc) {
+ crtc_state = drm_atomic_get_new_crtc_state(state, new_crtc);
+
+ if (!crtc_state ||
+ !drm_atomic_crtc_needs_modeset(crtc_state) ||
+ crtc_state->enable)
+ return 0;
+ }
+
+ return drm_dp_atomic_release_vcpi_slots(state, mgr, mstc->port);
+}
+
static const struct drm_connector_helper_funcs
nv50_mstc_help = {
.get_modes = nv50_mstc_get_modes,
.mode_valid = nv50_mstc_mode_valid,
.best_encoder = nv50_mstc_best_encoder,
.atomic_best_encoder = nv50_mstc_atomic_best_encoder,
+ .atomic_check = nv50_mstc_atomic_check,
};
static enum drm_connector_status
@@ -2120,6 +2158,10 @@ nv50_disp_atomic_check(struct drm_device *dev, struct drm_atomic_state *state)
return ret;
}
+ ret = drm_dp_mst_atomic_check(state);
+ if (ret)
+ return ret;
+
return 0;
}
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-01-10 19:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-10 19:57 [PATCH v6 00/20] MST refcounting/atomic helpers cleanup Lyude Paul
[not found] ` <20190110195753.6234-1-lyude-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2019-01-10 19:57 ` [PATCH v6 01/20] drm/dp_mst: Fix some formatting in drm_dp_add_port() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 02/20] drm/dp_mst: Fix some formatting in drm_dp_payload_send_msg() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 06/20] drm/dp_mst: Introduce new refcounting scheme for mstbs and ports Lyude Paul
2019-01-10 19:57 ` [PATCH v6 07/20] drm/dp_mst: Restart last_connected_port_and_mstb() if topology ref fails Lyude Paul
2019-01-10 19:57 ` [PATCH v6 09/20] drm/dp_mst: Fix payload deallocation on hotplugs using malloc refs Lyude Paul
2019-01-10 19:57 ` [PATCH v6 10/20] drm/i915: Keep malloc references to MST ports Lyude Paul
2019-01-10 19:57 ` [PATCH v6 11/20] drm/amdgpu/display: Keep malloc ref to MST port Lyude Paul
2019-01-10 19:57 ` [PATCH v6 12/20] drm/nouveau: Remove bogus cleanup in nv50_mstm_add_connector() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 14/20] drm/nouveau: Keep malloc references to MST ports Lyude Paul
2019-01-10 19:57 ` [PATCH v6 15/20] drm/nouveau: Stop unsetting mstc->port, use malloc refs Lyude Paul
2019-01-10 19:57 ` [PATCH v6 16/20] drm/nouveau: Grab payload lock in nv50_msto_payload() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 17/20] drm/dp_mst: Add some atomic state iterator macros Lyude Paul
2019-01-10 19:57 ` [PATCH v6 03/20] drm/dp_mst: Fix some formatting in drm_dp_mst_allocate_vcpi() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 04/20] drm/dp_mst: Fix some formatting in drm_dp_mst_deallocate_vcpi() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 05/20] drm/dp_mst: Rename drm_dp_mst_get_validated_(port|mstb)_ref and friends Lyude Paul
2019-01-10 19:57 ` [PATCH v6 08/20] drm/dp_mst: Stop releasing VCPI when removing ports from topology Lyude Paul
2019-01-10 19:57 ` [PATCH v6 13/20] drm/nouveau: Remove unnecessary VCPI checks in nv50_msto_cleanup() Lyude Paul
2019-01-10 19:57 ` [PATCH v6 18/20] drm/dp_mst: Start tracking per-port VCPI allocations Lyude Paul
2019-01-10 19:57 ` [PATCH v6 19/20] drm/dp_mst: Check payload count in drm_dp_mst_atomic_check() Lyude Paul
2019-01-10 19:57 ` Lyude Paul [this message]
2019-01-11 0:43 ` [Nouveau] [PATCH v6 00/20] MST refcounting/atomic helpers cleanup Ben Skeggs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190110195753.6234-21-lyude@redhat.com \
--to=lyude@redhat.com \
--cc=Jerry.Zuo@amd.com \
--cc=airlied@redhat.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox