From: Daniel Vetter <daniel@ffwll.ch>
To: "Noralf Trønnes" <noralf@tronnes.org>
Cc: david@lechnology.com, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 04/11] drm/tinydrm: Remove tinydrm_display_pipe_init()
Date: Mon, 21 Jan 2019 10:15:55 +0100 [thread overview]
Message-ID: <20190121091555.GL3271@phenom.ffwll.local> (raw)
In-Reply-To: <20190120114318.49199-5-noralf@tronnes.org>
On Sun, Jan 20, 2019 at 12:43:11PM +0100, Noralf Trønnes wrote:
> Further strip down tinydrm.ko and switch to drm_simple_connector_create().
>
> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
> ---
> Documentation/gpu/tinydrm.rst | 3 -
> drivers/gpu/drm/tinydrm/core/Makefile | 2 +-
> drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c | 183 --------------------
> drivers/gpu/drm/tinydrm/mipi-dbi.c | 24 ++-
> drivers/gpu/drm/tinydrm/repaper.c | 16 +-
> drivers/gpu/drm/tinydrm/st7586.c | 19 +-
> include/drm/tinydrm/tinydrm.h | 9 -
> 7 files changed, 43 insertions(+), 213 deletions(-)
> delete mode 100644 drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
>
> diff --git a/Documentation/gpu/tinydrm.rst b/Documentation/gpu/tinydrm.rst
> index a913644bfc19..1ca726474af4 100644
> --- a/Documentation/gpu/tinydrm.rst
> +++ b/Documentation/gpu/tinydrm.rst
> @@ -17,9 +17,6 @@ Core functionality
> .. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c
> :export:
>
> -.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> - :export:
> -
> Additional helpers
> ==================
>
> diff --git a/drivers/gpu/drm/tinydrm/core/Makefile b/drivers/gpu/drm/tinydrm/core/Makefile
> index fb221e6f8885..bf2df7326df7 100644
> --- a/drivers/gpu/drm/tinydrm/core/Makefile
> +++ b/drivers/gpu/drm/tinydrm/core/Makefile
> @@ -1,3 +1,3 @@
> -tinydrm-y := tinydrm-core.o tinydrm-pipe.o tinydrm-helpers.o
> +tinydrm-y := tinydrm-core.o tinydrm-helpers.o
>
> obj-$(CONFIG_DRM_TINYDRM) += tinydrm.o
> diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c b/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> deleted file mode 100644
> index 323564329535..000000000000
> --- a/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c
> +++ /dev/null
> @@ -1,183 +0,0 @@
> -/*
> - * Copyright (C) 2016 Noralf Trønnes
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#include <drm/drm_atomic_helper.h>
> -#include <drm/drm_crtc_helper.h>
> -#include <drm/drm_drv.h>
> -#include <drm/drm_gem_framebuffer_helper.h>
> -#include <drm/drm_modes.h>
> -#include <drm/drm_print.h>
> -#include <drm/tinydrm/tinydrm.h>
> -
> -struct tinydrm_connector {
> - struct drm_connector base;
> - struct drm_display_mode mode;
> -};
> -
> -static inline struct tinydrm_connector *
> -to_tinydrm_connector(struct drm_connector *connector)
> -{
> - return container_of(connector, struct tinydrm_connector, base);
> -}
> -
> -static int tinydrm_connector_get_modes(struct drm_connector *connector)
> -{
> - struct tinydrm_connector *tconn = to_tinydrm_connector(connector);
> - struct drm_display_mode *mode;
> -
> - mode = drm_mode_duplicate(connector->dev, &tconn->mode);
> - if (!mode) {
> - DRM_ERROR("Failed to duplicate mode\n");
> - return 0;
> - }
> -
> - if (mode->name[0] == '\0')
> - drm_mode_set_name(mode);
> -
> - mode->type |= DRM_MODE_TYPE_PREFERRED;
> - drm_mode_probed_add(connector, mode);
> -
> - if (mode->width_mm) {
> - connector->display_info.width_mm = mode->width_mm;
> - connector->display_info.height_mm = mode->height_mm;
> - }
> -
> - return 1;
> -}
> -
> -static const struct drm_connector_helper_funcs tinydrm_connector_hfuncs = {
> - .get_modes = tinydrm_connector_get_modes,
> -};
> -
> -static enum drm_connector_status
> -tinydrm_connector_detect(struct drm_connector *connector, bool force)
> -{
> - if (drm_dev_is_unplugged(connector->dev))
> - return connector_status_disconnected;
> -
> - return connector->status;
> -}
> -
> -static void tinydrm_connector_destroy(struct drm_connector *connector)
> -{
> - struct tinydrm_connector *tconn = to_tinydrm_connector(connector);
> -
> - drm_connector_cleanup(connector);
> - kfree(tconn);
> -}
> -
> -static const struct drm_connector_funcs tinydrm_connector_funcs = {
> - .reset = drm_atomic_helper_connector_reset,
> - .detect = tinydrm_connector_detect,
> - .fill_modes = drm_helper_probe_single_connector_modes,
> - .destroy = tinydrm_connector_destroy,
> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> -};
> -
> -struct drm_connector *
> -tinydrm_connector_create(struct drm_device *drm,
> - const struct drm_display_mode *mode,
> - int connector_type)
> -{
> - struct tinydrm_connector *tconn;
> - struct drm_connector *connector;
> - int ret;
> -
> - tconn = kzalloc(sizeof(*tconn), GFP_KERNEL);
> - if (!tconn)
> - return ERR_PTR(-ENOMEM);
> -
> - drm_mode_copy(&tconn->mode, mode);
> - connector = &tconn->base;
> -
> - drm_connector_helper_add(connector, &tinydrm_connector_hfuncs);
> - ret = drm_connector_init(drm, connector, &tinydrm_connector_funcs,
> - connector_type);
> - if (ret) {
> - kfree(tconn);
> - return ERR_PTR(ret);
> - }
> -
> - connector->status = connector_status_connected;
> -
> - return connector;
> -}
> -
> -static int tinydrm_rotate_mode(struct drm_display_mode *mode,
> - unsigned int rotation)
> -{
> - if (rotation == 0 || rotation == 180) {
> - return 0;
> - } else if (rotation == 90 || rotation == 270) {
> - swap(mode->hdisplay, mode->vdisplay);
> - swap(mode->hsync_start, mode->vsync_start);
> - swap(mode->hsync_end, mode->vsync_end);
> - swap(mode->htotal, mode->vtotal);
> - swap(mode->width_mm, mode->height_mm);
> - return 0;
> - } else {
> - return -EINVAL;
> - }
> -}
> -
> -/**
> - * tinydrm_display_pipe_init - Initialize display pipe
> - * @tdev: tinydrm device
> - * @funcs: Display pipe functions
> - * @connector_type: Connector type
> - * @formats: Array of supported formats (DRM_FORMAT\_\*)
> - * @format_count: Number of elements in @formats
> - * @mode: Supported mode
> - * @rotation: Initial @mode rotation in degrees Counter Clock Wise
> - *
> - * This function sets up a &drm_simple_display_pipe with a &drm_connector that
> - * has one fixed &drm_display_mode which is rotated according to @rotation.
> - *
> - * Returns:
> - * Zero on success, negative error code on failure.
> - */
> -int
> -tinydrm_display_pipe_init(struct tinydrm_device *tdev,
> - const struct drm_simple_display_pipe_funcs *funcs,
> - int connector_type,
> - const uint32_t *formats,
> - unsigned int format_count,
> - const struct drm_display_mode *mode,
> - unsigned int rotation)
> -{
> - struct drm_device *drm = tdev->drm;
> - struct drm_display_mode mode_copy;
> - struct drm_connector *connector;
> - int ret;
> - static const uint64_t modifiers[] = {
> - DRM_FORMAT_MOD_LINEAR,
> - DRM_FORMAT_MOD_INVALID
> - };
> -
> - drm_mode_copy(&mode_copy, mode);
> - ret = tinydrm_rotate_mode(&mode_copy, rotation);
> - if (ret) {
> - DRM_ERROR("Illegal rotation value %u\n", rotation);
> - return -EINVAL;
> - }
> -
> - drm->mode_config.min_width = mode_copy.hdisplay;
> - drm->mode_config.max_width = mode_copy.hdisplay;
> - drm->mode_config.min_height = mode_copy.vdisplay;
> - drm->mode_config.max_height = mode_copy.vdisplay;
> -
> - connector = tinydrm_connector_create(drm, &mode_copy, connector_type);
> - if (IS_ERR(connector))
> - return PTR_ERR(connector);
> -
> - return drm_simple_display_pipe_init(drm, &tdev->pipe, funcs, formats,
> - format_count, modifiers, connector);
> -}
> -EXPORT_SYMBOL(tinydrm_display_pipe_init);
> diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> index 918f77c7de34..d1d546f3a664 100644
> --- a/drivers/gpu/drm/tinydrm/mipi-dbi.c
> +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c
> @@ -391,7 +391,13 @@ int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
> {
> size_t bufsize = mode->vdisplay * mode->hdisplay * sizeof(u16);
> struct tinydrm_device *tdev = &mipi->tinydrm;
> + struct drm_connector *connector;
> + struct drm_device *drm;
> int ret;
> + static const uint64_t modifiers[] = {
> + DRM_FORMAT_MOD_LINEAR,
> + DRM_FORMAT_MOD_INVALID
> + };
>
> if (!mipi->command)
> return -EINVAL;
> @@ -406,18 +412,22 @@ int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi,
> if (ret)
> return ret;
>
> - /* TODO: Maybe add DRM_MODE_CONNECTOR_SPI */
> - ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
> - DRM_MODE_CONNECTOR_VIRTUAL,
> - mipi_dbi_formats,
> - ARRAY_SIZE(mipi_dbi_formats), mode,
> - rotation);
> + drm = tdev->drm;
> +
> + connector = drm_simple_connector_create(drm, DRM_MODE_CONNECTOR_VIRTUAL, mode, rotation);
You lost the todo here ... _VIRTUAL is kinda a pretty good lie, since this
is definitely not virtual hw :-)
-Daniel
> + if (IS_ERR(connector))
> + return PTR_ERR(connector);
> +
> + ret = drm_simple_display_pipe_init(drm, &tdev->pipe, pipe_funcs,
> + mipi_dbi_formats, ARRAY_SIZE(mipi_dbi_formats),
> + modifiers, connector);
> if (ret)
> return ret;
>
> drm_plane_enable_fb_damage_clips(&tdev->pipe.plane);
>
> - tdev->drm->mode_config.preferred_depth = 16;
> + drm_simple_connector_set_mode_config(connector);
> + drm->mode_config.preferred_depth = 16;
> mipi->rotation = rotation;
>
> drm_mode_config_reset(tdev->drm);
> diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c
> index 72d30151ecd8..1d551744cc9b 100644
> --- a/drivers/gpu/drm/tinydrm/repaper.c
> +++ b/drivers/gpu/drm/tinydrm/repaper.c
> @@ -924,12 +924,14 @@ static int repaper_probe(struct spi_device *spi)
> const struct drm_display_mode *mode;
> const struct spi_device_id *spi_id;
> const struct of_device_id *match;
> + struct drm_connector *connector;
> struct device *dev = &spi->dev;
> struct tinydrm_device *tdev;
> enum repaper_model model;
> const char *thermal_zone;
> struct repaper_epd *epd;
> size_t line_buffer_size;
> + struct drm_device *drm;
> int ret;
>
> match = of_match_device(repaper_of_match, dev);
> @@ -1069,13 +1071,19 @@ static int repaper_probe(struct spi_device *spi)
> if (ret)
> return ret;
>
> - ret = tinydrm_display_pipe_init(tdev, &repaper_pipe_funcs,
> - DRM_MODE_CONNECTOR_VIRTUAL,
> - repaper_formats,
> - ARRAY_SIZE(repaper_formats), mode, 0);
> + drm = tdev->drm;
> +
> + connector = drm_simple_connector_create(drm, DRM_MODE_CONNECTOR_VIRTUAL, mode, 0);
> + if (IS_ERR(connector))
> + return PTR_ERR(connector);
> +
> + ret = drm_simple_display_pipe_init(drm, &tdev->pipe, &repaper_pipe_funcs,
> + repaper_formats, ARRAY_SIZE(repaper_formats),
> + NULL, connector);
> if (ret)
> return ret;
>
> + drm_simple_connector_set_mode_config(connector);
> drm_mode_config_reset(tdev->drm);
> spi_set_drvdata(spi, tdev);
>
> diff --git a/drivers/gpu/drm/tinydrm/st7586.c b/drivers/gpu/drm/tinydrm/st7586.c
> index 5ee7db561349..6cb68dd7e7b6 100644
> --- a/drivers/gpu/drm/tinydrm/st7586.c
> +++ b/drivers/gpu/drm/tinydrm/st7586.c
> @@ -271,6 +271,8 @@ static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
> {
> size_t bufsize = (mode->vdisplay + 2) / 3 * mode->hdisplay;
> struct tinydrm_device *tdev = &mipi->tinydrm;
> + struct drm_connector *connector;
> + struct drm_device *drm;
> int ret;
>
> mutex_init(&mipi->cmdlock);
> @@ -283,17 +285,22 @@ static int st7586_init(struct device *dev, struct mipi_dbi *mipi,
> if (ret)
> return ret;
>
> - ret = tinydrm_display_pipe_init(tdev, pipe_funcs,
> - DRM_MODE_CONNECTOR_VIRTUAL,
> - st7586_formats,
> - ARRAY_SIZE(st7586_formats),
> - mode, rotation);
> + drm = tdev->drm;
> +
> + connector = drm_simple_connector_create(drm, DRM_MODE_CONNECTOR_VIRTUAL, mode, rotation);
> + if (IS_ERR(connector))
> + return PTR_ERR(connector);
> +
> + ret = drm_simple_display_pipe_init(drm, &tdev->pipe, pipe_funcs,
> + st7586_formats, ARRAY_SIZE(st7586_formats),
> + NULL, connector);
> if (ret)
> return ret;
>
> drm_plane_enable_fb_damage_clips(&tdev->pipe.plane);
>
> - tdev->drm->mode_config.preferred_depth = 32;
> + drm_simple_connector_set_mode_config(connector);
> + drm->mode_config.preferred_depth = 32;
> mipi->rotation = rotation;
>
> drm_mode_config_reset(tdev->drm);
> diff --git a/include/drm/tinydrm/tinydrm.h b/include/drm/tinydrm/tinydrm.h
> index 87e7f9b93a37..69c4363fd88e 100644
> --- a/include/drm/tinydrm/tinydrm.h
> +++ b/include/drm/tinydrm/tinydrm.h
> @@ -40,13 +40,4 @@ int devm_tinydrm_init(struct device *parent, struct tinydrm_device *tdev,
> int devm_tinydrm_register(struct tinydrm_device *tdev);
> void tinydrm_shutdown(struct tinydrm_device *tdev);
>
> -int
> -tinydrm_display_pipe_init(struct tinydrm_device *tdev,
> - const struct drm_simple_display_pipe_funcs *funcs,
> - int connector_type,
> - const uint32_t *formats,
> - unsigned int format_count,
> - const struct drm_display_mode *mode,
> - unsigned int rotation);
> -
> #endif /* __LINUX_TINYDRM_H */
> --
> 2.20.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-01-21 9:15 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-20 11:43 [PATCH 00/11] drm/tinydrm: Remove tinydrm_device Noralf Trønnes
2019-01-20 11:43 ` [PATCH 01/11] drm: Add devm_drm_dev_init/register Noralf Trønnes
2019-01-21 6:11 ` Sam Ravnborg
2019-01-21 13:09 ` Noralf Trønnes
2019-01-21 9:10 ` Daniel Vetter
2019-01-21 9:55 ` Daniel Vetter
2019-01-21 12:21 ` Noralf Trønnes
2019-01-22 9:32 ` Daniel Vetter
2019-01-22 19:07 ` Noralf Trønnes
2019-01-22 19:30 ` Daniel Vetter
2019-01-23 10:54 ` Noralf Trønnes
2019-01-24 10:43 ` devm actions and hw clenaup (was Re: [PATCH 01/11] drm: Add devm_drm_dev_init/register) Daniel Vetter
2019-01-24 17:46 ` Greg KH
2019-01-24 17:57 ` Daniel Vetter
2019-01-29 14:34 ` Noralf Trønnes
2019-01-29 15:16 ` Greg KH
2019-01-29 16:50 ` Daniel Vetter
2019-01-29 17:26 ` Noralf Trønnes
2019-01-29 17:36 ` Greg KH
2019-01-29 18:10 ` Daniel Vetter
2019-01-29 19:27 ` Greg KH
2019-01-29 23:14 ` Daniel Vetter
2019-01-30 7:14 ` Greg KH
2019-01-22 9:35 ` [PATCH 01/11] drm: Add devm_drm_dev_init/register Daniel Vetter
2019-01-20 11:43 ` [PATCH 02/11] drm/modes: Add DRM_SIMPLE_MODE() Noralf Trønnes
2019-01-20 16:37 ` Ilia Mirkin
2019-01-20 17:27 ` Noralf Trønnes
2019-01-20 11:43 ` [PATCH 03/11] drm/simple-kms-helper: Add drm_simple_connector_create() Noralf Trønnes
2019-01-20 22:14 ` Sam Ravnborg
2019-01-21 9:22 ` Daniel Vetter
2019-01-24 14:38 ` Noralf Trønnes
2019-01-24 14:53 ` Hans de Goede
2019-01-25 12:05 ` Noralf Trønnes
2019-01-20 11:43 ` [PATCH 04/11] drm/tinydrm: Remove tinydrm_display_pipe_init() Noralf Trønnes
2019-01-21 6:30 ` Sam Ravnborg
2019-01-21 9:15 ` Daniel Vetter [this message]
2019-01-28 14:46 ` Noralf Trønnes
2019-01-20 11:43 ` [PATCH 05/11] drm/tinydrm/mipi-dbi: Add drm_to_mipi_dbi() Noralf Trønnes
2019-01-21 6:34 ` Sam Ravnborg
2019-01-20 11:43 ` [PATCH 06/11] drm/tinydrm: Remove tinydrm_shutdown() Noralf Trønnes
2019-01-21 7:12 ` Sam Ravnborg
2019-01-20 11:43 ` [PATCH 07/11] drm/tinydrm/repaper: Use devm_drm_dev_*() Noralf Trønnes
2019-01-20 22:22 ` Sam Ravnborg
2019-01-20 22:25 ` Sam Ravnborg
2019-01-21 13:15 ` Noralf Trønnes
2019-01-20 11:43 ` [PATCH 08/11] drm/tinydrm: " Noralf Trønnes
2019-01-20 11:43 ` [PATCH 09/11] drm/tinydrm: Remove tinydrm_device Noralf Trønnes
2019-01-21 8:13 ` Sam Ravnborg
2019-01-21 9:29 ` Daniel Vetter
2019-01-21 13:30 ` Noralf Trønnes
2019-01-20 11:43 ` [PATCH 10/11] drm/tinydrm: Use drm_dev_enter/exit() Noralf Trønnes
2019-01-20 11:43 ` [PATCH 11/11] drm/fb-helper: generic: Don't take module ref for fbcon Noralf Trønnes
2019-01-21 9:05 ` Daniel Vetter
2019-01-28 14:40 ` Noralf Trønnes
2019-01-29 8:45 ` Daniel Vetter
2019-01-21 8:34 ` [PATCH 00/11] drm/tinydrm: Remove tinydrm_device Sam Ravnborg
2019-01-21 13:20 ` Noralf Trønnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190121091555.GL3271@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=david@lechnology.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=noralf@tronnes.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox