Re: [PATCH v5 07/17] drm/sun4i: sun6i_mipi_dsi: Refactor vertical video start delay

[Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 3064 bytes --]

On Fri, Jan 18, 2019 at 09:14:19PM +0530, Jagan Teki wrote:
> On Thu, Jan 17, 2019 at 10:02 AM Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> wrote:
> >
> > On Thu, Jan 17, 2019 at 12:48 AM Maxime Ripard
> > <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org> wrote:
> > >
> > > On Sun, Jan 13, 2019 at 01:07:41AM +0530, Jagan Teki wrote:
> > > > > > > > > Again, I cannot help you without the datasheet for the panels you're
> > > > > > > > > trying to submit.
> > > > > > > >
> > > > > > > > The panel bound with Sitronix ST7701 IC
> > > > > > > > http://www.startek-lcd.com/res/starteklcd/pdres/201705/20170512144242904.pdf
> > > > > > >
> > > > > > > It's the controller, not the panel
> > > > > >
> > > > > > As I said before, the datasheet of that panel doesn't have any
> > > > > > information except electrical characteristics and used IC which is
> > > > > > ST7701.
> > > > > >
> > > > > > I have one more panel, which is from Bananapi, S070WV20-CT16 ICN621
> > > > > > please find the attachment for the same.
> > > > > >
> > > > > > Here is some more details of the same.
> > > > > >
> > > > > > https://github.com/yesnoandor/x300/blob/master/kernel/arch/arm/boot/dts/erobbing/x300/x300.dtsi#L81
> > > > > > https://github.com/wxzed/Raspberry_5MIPI_Display/blob/master/I2C_Slave/USER/main.c#L15
> > > > > >
> > > > > > https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/drivers/video/msm/mdss/mdss_i2c_interface.c#L152
> > > > > > matches timings for
> > > > > > https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/arch/arm/boot/dts/qcom/dsi-mipi-2-rgb_1280p_video.dtsi#L20
> > > > > >
> > > > > > https://github.com/zestroly/micromat/blob/master/test/raspberry/ICN6211.cpp#L169
> > > > >
> > > > > Where did you get the timings from then?
> > > >
> > > > You mean drm_mode timings, the same panel with RGB available in
> > > > panel-simple[1], and dsi driver in Mailing list[2] and actual DSI
> > > > sequence commands from BSP[3]
> > > >
> > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/gpu/drm/panel/panel-simple.c?id=7ad8b41cd8f5c2842646d01cdd576663caee04a7
> > > > [2] https://patchwork.kernel.org/patch/10680331/
> > > > [3] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/lcd/S070WV20_MIPI_RGB.c
> > >
> > > So you had no reliable source for the timings then? How do you know if
> > > all your patches that are timing related are right then?
> >
> > I don't understand your point, or may be I confused with many links
> > that I attached in previous mail.
> >
> > 1. Patch for same panel timings are already in Mainline that was
> > tested on one of the board. [1]
> > 2. Driver from AW, released bsp from BPI-M64-bsp [3]
> >
> > Do you think the above two points are not valid sources?
> 
> fyi, the panel datasheet attached in above mail has timing information.

Do you have a page number?

maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com