From: Gerd Hoffmann <kraxel@redhat.com>
To: dri-devel@lists.freedesktop.org
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
"open list:INTEL DRM DRIVERS excluding Poulsbo,
Moorestow..." <intel-gfx@lists.freedesktop.org>,
open list <linux-kernel@vger.kernel.org>,
David Airlie <airlied@linux.ie>,
Gerd Hoffmann <kraxel@redhat.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>,
Sean Paul <sean@poorly.run>
Subject: [PATCH v3] drm: move i915_kick_out_vgacon to drm_fb_helper
Date: Thu, 21 Feb 2019 16:47:33 +0100 [thread overview]
Message-ID: <20190221154733.5516-1-kraxel@redhat.com> (raw)
Also rename it and call it automatically from
drm_fb_helper_remove_conflicting_pci_framebuffers()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/drm/drm_fb_helper.h | 18 ++++++++++++++---
drivers/gpu/drm/drm_fb_helper.c | 35 +++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_drv.c | 43 -----------------------------------------
3 files changed, 50 insertions(+), 46 deletions(-)
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index bb9acea61369..aef764c3dd7f 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -36,6 +36,7 @@ struct drm_fb_helper;
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <linux/kgdb.h>
+#include <linux/vgaarb.h>
enum mode_set_atomic {
LEAVE_ATOMIC_MODE_SET,
@@ -625,6 +626,8 @@ drm_fb_helper_remove_conflicting_framebuffers(struct apertures_struct *a,
#endif
}
+int drm_fb_helper_kick_out_vgacon(void);
+
/**
* drm_fb_helper_remove_conflicting_pci_framebuffers - remove firmware-configured framebuffers for PCI devices
* @pdev: PCI device
@@ -642,11 +645,20 @@ drm_fb_helper_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
int resource_id,
const char *name)
{
+ int ret = 0;
+
+ /*
+ * WARNING: Apparently we must kick fbdev drivers before vgacon,
+ * otherwise the vga fbdev driver falls over.
+ */
#if IS_REACHABLE(CONFIG_FB)
- return remove_conflicting_pci_framebuffers(pdev, resource_id, name);
-#else
- return 0;
+ ret = remove_conflicting_pci_framebuffers(pdev, resource_id, name);
#endif
+#if IS_REACHABLE(CONFIG_DRM_FBDEV_EMULATION)
+ if (ret == 0 && vga_default_device() == pdev)
+ ret = drm_fb_helper_kick_out_vgacon();
+#endif
+ return ret;
}
#endif
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 04d23cb430bf..57f410e2bba6 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -35,6 +35,7 @@
#include <linux/sysrq.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/vt_kern.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
@@ -3355,3 +3356,37 @@ int __init drm_fb_helper_modinit(void)
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_modinit);
+
+#if !defined(CONFIG_VGA_CONSOLE)
+int drm_fb_helper_kick_out_vgacon(void)
+{
+ return 0;
+}
+#elif !defined(CONFIG_DUMMY_CONSOLE)
+int drm_fb_helper_kick_out_vgacon(void)
+{
+ return -ENODEV;
+}
+#else
+int drm_fb_helper_kick_out_vgacon(void)
+{
+ int ret = 0;
+
+ DRM_INFO("Replacing VGA console driver\n");
+
+ console_lock();
+ if (con_is_bound(&vga_con))
+ ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
+ if (ret == 0) {
+ ret = do_unregister_con_driver(&vga_con);
+
+ /* Ignore "already unregistered". */
+ if (ret == -ENODEV)
+ ret = 0;
+ }
+ console_unlock();
+
+ return ret;
+}
+#endif
+EXPORT_SYMBOL(drm_fb_helper_kick_out_vgacon);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 6630212f2faf..0e87eef542da 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -757,39 +757,6 @@ static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
return ret;
}
-#if !defined(CONFIG_VGA_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- return 0;
-}
-#elif !defined(CONFIG_DUMMY_CONSOLE)
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- return -ENODEV;
-}
-#else
-static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
-{
- int ret = 0;
-
- DRM_INFO("Replacing VGA console driver\n");
-
- console_lock();
- if (con_is_bound(&vga_con))
- ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
- if (ret == 0) {
- ret = do_unregister_con_driver(&vga_con);
-
- /* Ignore "already unregistered". */
- if (ret == -ENODEV)
- ret = 0;
- }
- console_unlock();
-
- return ret;
-}
-#endif
-
static void intel_init_dpio(struct drm_i915_private *dev_priv)
{
/*
@@ -1410,22 +1377,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
if (ret)
goto err_perf;
- /*
- * WARNING: Apparently we must kick fbdev drivers before vgacon,
- * otherwise the vga fbdev driver falls over.
- */
ret = i915_kick_out_firmware_fb(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
goto err_ggtt;
}
- ret = i915_kick_out_vgacon(dev_priv);
- if (ret) {
- DRM_ERROR("failed to remove conflicting VGA console\n");
- goto err_ggtt;
- }
-
ret = i915_ggtt_init_hw(dev_priv);
if (ret)
goto err_ggtt;
--
2.9.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
reply other threads:[~2019-02-21 15:47 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190221154733.5516-1-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=rodrigo.vivi@intel.com \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox