From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>,
Daniel Thompson <daniel.thompson@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>,
dri-devel@lists.freedesktop.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1] backlight: gpio_backlight: Enable ACPI enumeration
Date: Wed, 19 Jun 2019 18:21:27 +0300 [thread overview]
Message-ID: <20190619152127.11670-1-andriy.shevchenko@linux.intel.com> (raw)
ACPI allows to enumerate specific devices by using compatible strings.
Enable that enumeration for GPIO based backlight devices.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/video/backlight/gpio_backlight.c | 23 +++++++++--------------
1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index e470da95d806..05c12df62b27 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -18,6 +18,7 @@
#include <linux/of_gpio.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
struct gpio_backlight {
@@ -61,11 +62,10 @@ static int gpio_backlight_probe_dt(struct platform_device *pdev,
struct gpio_backlight *gbl)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
enum gpiod_flags flags;
int ret;
- gbl->def_value = of_property_read_bool(np, "default-on");
+ gbl->def_value = device_property_read_bool(dev, "default-on");
flags = gbl->def_value ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
gbl->gpiod = devm_gpiod_get(dev, NULL, flags);
@@ -89,26 +89,19 @@ static int gpio_backlight_probe(struct platform_device *pdev)
struct backlight_properties props;
struct backlight_device *bl;
struct gpio_backlight *gbl;
- struct device_node *np = pdev->dev.of_node;
int ret;
- if (!pdata && !np) {
- dev_err(&pdev->dev,
- "failed to find platform data or device tree node.\n");
- return -ENODEV;
- }
-
gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
if (gbl == NULL)
return -ENOMEM;
gbl->dev = &pdev->dev;
- if (np) {
+ if (pdev->dev.fwnode) {
ret = gpio_backlight_probe_dt(pdev, gbl);
if (ret)
return ret;
- } else {
+ } else if (pdata) {
/*
* Legacy platform data GPIO retrieveal. Do not expand
* the use of this code path, currently only used by one
@@ -129,6 +122,10 @@ static int gpio_backlight_probe(struct platform_device *pdev)
gbl->gpiod = gpio_to_desc(pdata->gpio);
if (!gbl->gpiod)
return -EINVAL;
+ } else {
+ dev_err(&pdev->dev,
+ "failed to find platform data or device tree node.\n");
+ return -ENODEV;
}
memset(&props, 0, sizeof(props));
@@ -149,19 +146,17 @@ static int gpio_backlight_probe(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_OF
static struct of_device_id gpio_backlight_of_match[] = {
{ .compatible = "gpio-backlight" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, gpio_backlight_of_match);
-#endif
static struct platform_driver gpio_backlight_driver = {
.driver = {
.name = "gpio-backlight",
- .of_match_table = of_match_ptr(gpio_backlight_of_match),
+ .of_match_table = gpio_backlight_of_match,
},
.probe = gpio_backlight_probe,
};
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-06-19 15:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-19 15:21 Andy Shevchenko [this message]
2019-06-20 14:12 ` [PATCH v1] backlight: gpio_backlight: Enable ACPI enumeration Daniel Thompson
2019-06-20 15:12 ` Andy Shevchenko
2019-06-26 10:57 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190619152127.11670-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=daniel.thompson@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jingoohan1@gmail.com \
--cc=lee.jones@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox