From: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org, openchrome-devel@lists.freedesktop.org
Cc: "Thomas Hellstrom" <thellstrom@vmware.com>,
"Sam Ravnborg" <sam@ravnborg.org>,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel.vetter@ffwll.ch>,
"Michel Dänzer" <michel@daenzer.net>,
"Kevin Brace" <kevinbrace@gmx.com>,
"Mike Marshall" <hubcap@omnibond.com>,
"Ira Weiny" <ira.weiny@intel.com>,
"Emil Velikov" <emil.velikov@collabora.com>
Subject: [PATCH v3 2/4] drm/via: copy DRM_WAIT_ON as VIA_WAIT_ON and use it
Date: Mon, 22 Jul 2019 22:35:43 +0200 [thread overview]
Message-ID: <20190722203545.8612-3-sam@ravnborg.org> (raw)
In-Reply-To: <20190722203545.8612-1-sam@ravnborg.org>
VIA_WAIT_ON() is a direct copy of DRM_WAIT_ON() from
drm_os_linux.h.
The copy is made so we can avoid the dependency on the legacy header.
A more involved approach had been to introduce wait_event_* but for this
legacy driver the simpler and more safe approach with a copy of the
macro was selected.
Added the relevant header files for the functions used in VIA_WAIT_ON.
v3:
- Updated users of DRM_WAIT_ON => VIA_WAIT_ON (Emil)
- Updated $subject (Emil)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Michel Dänzer <michel@daenzer.net>
---
drivers/gpu/drm/via/via_dmablit.c | 4 +--
drivers/gpu/drm/via/via_drv.h | 42 ++++++++++++++++++++++++++++++-
drivers/gpu/drm/via/via_irq.c | 4 +--
drivers/gpu/drm/via/via_video.c | 2 +-
4 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index e1557dd67083..2ec93d976a43 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -436,7 +436,7 @@ via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
int ret = 0;
if (via_dmablit_active(blitq, engine, handle, &queue)) {
- DRM_WAIT_ON(ret, *queue, 3 * HZ,
+ VIA_WAIT_ON(ret, *queue, 3 * HZ,
!via_dmablit_active(blitq, engine, handle, NULL));
}
DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
@@ -687,7 +687,7 @@ via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
while (blitq->num_free == 0) {
spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
- DRM_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
+ VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0);
if (ret)
return (-EINTR == ret) ? -EAGAIN : ret;
diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h
index 8c16c208ae83..3eb92e81655e 100644
--- a/drivers/gpu/drm/via/via_drv.h
+++ b/drivers/gpu/drm/via/via_drv.h
@@ -24,8 +24,13 @@
#ifndef _VIA_DRV_H_
#define _VIA_DRV_H_
-#include <drm/drm_mm.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/wait.h>
+
#include <drm/drm_legacy.h>
+#include <drm/drm_mm.h>
#define DRIVER_AUTHOR "Various"
@@ -148,6 +153,41 @@ static inline void via_write8_mask_and(struct drm_via_private *dev_priv,
writeb(val & mask, (void __iomem *)(dev_priv->mmio->handle + reg));
}
+/*
+ * Poll in a loop waiting for 'contidition' to be true.
+ * Note: A direct replacement with wait_event_interruptible_timeout()
+ * will not work unless driver is updated to emit wake_up()
+ * in relevant places that can impact the 'condition'
+ *
+ * Returns:
+ * ret keeps current value if 'condition' becomes true
+ * ret = -BUSY if timeout happens
+ * ret = -EINTR if a signal interrupted the waiting period
+ */
+#define VIA_WAIT_ON( ret, queue, timeout, condition ) \
+do { \
+ DECLARE_WAITQUEUE(entry, current); \
+ unsigned long end = jiffies + (timeout); \
+ add_wait_queue(&(queue), &entry); \
+ \
+ for (;;) { \
+ __set_current_state(TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (time_after_eq(jiffies, end)) { \
+ ret = -EBUSY; \
+ break; \
+ } \
+ schedule_timeout((HZ/100 > 1) ? HZ/100 : 1); \
+ if (signal_pending(current)) { \
+ ret = -EINTR; \
+ break; \
+ } \
+ } \
+ __set_current_state(TASK_RUNNING); \
+ remove_wait_queue(&(queue), &entry); \
+} while (0)
+
extern const struct drm_ioctl_desc via_ioctls[];
extern int via_max_ioctl;
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 0ee0b767c3d7..5ac26d203f44 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -233,12 +233,12 @@ via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence
cur_irq = dev_priv->via_irqs + real_irq;
if (masks[real_irq][2] && !force_sequence) {
- DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
+ VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
((via_read(dev_priv, masks[irq][2]) & masks[irq][3]) ==
masks[irq][4]));
cur_irq_sequence = atomic_read(&cur_irq->irq_received);
} else {
- DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
+ VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ,
(((cur_irq_sequence =
atomic_read(&cur_irq->irq_received)) -
*sequence) <= (1 << 23)));
diff --git a/drivers/gpu/drm/via/via_video.c b/drivers/gpu/drm/via/via_video.c
index a9ffbad1cfdd..cf53612c945e 100644
--- a/drivers/gpu/drm/via/via_video.c
+++ b/drivers/gpu/drm/via/via_video.c
@@ -82,7 +82,7 @@ int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_
switch (fx->func) {
case VIA_FUTEX_WAIT:
- DRM_WAIT_ON(ret, dev_priv->decoder_queue[fx->lock],
+ VIA_WAIT_ON(ret, dev_priv->decoder_queue[fx->lock],
(fx->ms / 10) * (HZ / 100), *lock != fx->val);
return ret;
case VIA_FUTEX_WAKE:
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-07-22 20:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 20:35 (no subject) Sam Ravnborg
2019-07-22 20:35 ` [PATCH v3 1/4] drm/via: drop use of DRM(READ|WRITE) macros Sam Ravnborg
2019-07-22 20:35 ` Sam Ravnborg [this message]
2019-07-22 20:35 ` [PATCH v3 3/4] drm/via: make via_drv.h self-contained Sam Ravnborg
2019-07-22 20:35 ` [PATCH v3 4/4] drm/via: drop use of drmP.h Sam Ravnborg
2019-07-22 20:38 ` [PATCH v3 0/4] drm/via: drop use of deprecated headers drmP.h and drm_os_linux.h Sam Ravnborg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190722203545.8612-3-sam@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=emil.velikov@collabora.com \
--cc=gustavo@embeddedor.com \
--cc=hubcap@omnibond.com \
--cc=ira.weiny@intel.com \
--cc=kevinbrace@gmx.com \
--cc=michel@daenzer.net \
--cc=openchrome-devel@lists.freedesktop.org \
--cc=thellstrom@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox