Re: [PATCH v2 3/9] dt-bindings: display: panel: Add bindings for NEC NL8048HL11 panel

[Sam Ravnborg <sam@ravnborg.org>]

Hi Laurent.

My meta-schemas foo is very limited, but I noticed a few things.
Hopefully Rob finds time soon to review.

	Sam

On Sun, Aug 11, 2019 at 02:10:42AM +0300, Laurent Pinchart wrote:
> The NEC NL8048HL11 is a 10.4cm WVGA (800x480) panel with a 24-bit RGB
> parallel data interface and an SPI control interface.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Changes since v1:
> 
> - Convert to YAML
> ---
>  .../display/panel/nec,nl8048hl11.yaml         | 49 +++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
> new file mode 100644
> index 000000000000..cc3d40975828
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
> +
> +description:
> +  The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
> +  data interface and an SPI control interface.
> +
> +maintainers:
> +  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
I *think* we are missing a reference to spi-controller.yaml here.


> +
> +properties:
> +  compatible:
> +    const: nec,nl8048hl11
> +
> +  label: true
> +  reset-gpios: true
> +  port: true
> +
> +required:
> +  - compatible
> +  - reset-gpios
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lcd_panel: panel {
> +      compatible = "nec,nl8048hl11";
> +      spi-max-frequency = <10000000>;
Not sure, but should there be a reg property here for spi too?

> +
> +      reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
> +
> +      port {
> +        lcd_in: endpoint {
> +          remote-endpoint = <&dpi_out>;
> +        };
> +      };
> +    };
> +
> +...
> -- 
> Regards,
> 
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel