From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>,
dri-devel@lists.freedesktop.org,
Cooper Chiou <cooper.chiou@intel.com>
Subject: Re: [PATCH v2] drm/edid: Select DMT timing if EDID's display feature not support GTF
Date: Wed, 9 Oct 2019 15:40:16 +0300 [thread overview]
Message-ID: <20191009124016.GZ1208@intel.com> (raw)
In-Reply-To: <20191007135127.9538-1-shawn.c.lee@intel.com>
On Mon, Oct 07, 2019 at 09:51:27PM +0800, Lee Shawn C wrote:
> Refer to EDID 1.3 spec, display FEATURE (byte 18h) bit #0 said
> "If this bit is set to 1, the display supports timings based on the
> GTF standard using default GTF parameter values".
>
> And EDID 1.4 spec shows "If bit 0 is set to 0, then the display
> is noncontinuous frequency (multi-mode) and is only specified to accept
> the video timing formats that are listed in BASE EDID and certain
> EXTENSION Blocks.
>
> When display feature did not support CVT or GFT2 and monitor's EDID version
> greater than or equal to "1.2". DRM driver would select GTF as default
> for standard timing calculation. It may generated some video timing
> that can't display properly by external monitor.
>
> For example. When driver retrieved "0xD1 0xFC" (FHD, 120Hz) and
> "0xD1 0xE8" (FHD, 100Hz) from "Standard Timings". GTF formula
> would generate video timing like below. It already over monitor's
> spec to cause black screen issue.
> "1920x1080" 120 368881 1920 2072 2288 2656 1080 1081 1084 1157 0x0 0x6
> "1920x1080" 100 301992 1920 2072 2280 2640 1080 1081 1084 1144 0x0 0x6
>
> v2: Just confirm GTF flag and omit the revision check.
>
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Adam Jackson <ajax@redhat.com>
> Cc: Cooper Chiou <cooper.chiou@intel.com>
> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 5aee0ebc200e..26eb04820b52 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -2193,7 +2193,8 @@ static int standard_timing_level(struct edid *edid)
> return LEVEL_CVT;
> if (drm_gtf2_hbreak(edid))
> return LEVEL_GTF2;
> - return LEVEL_GTF;
> + if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)
> + return LEVEL_GTF;
lgtm. Thanks. Pushed to drm-misc-next.
> }
> return LEVEL_DMT;
> }
> --
> 2.17.1
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
prev parent reply other threads:[~2019-10-09 12:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 11:30 [PATCH] drm/edid: Select DMT timing if EDID's display feature not support GTF Lee Shawn C
2019-08-19 16:39 ` Ville Syrjälä
2019-10-07 13:51 ` [PATCH v2] " Lee Shawn C
2019-10-09 12:40 ` Ville Syrjälä [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009124016.GZ1208@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=cooper.chiou@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=shawn.c.lee@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).