dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: James Jones <jajones@nvidia.com>
To: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org, James Jones <jajones@nvidia.com>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH 3/3] drm/nouveau: Support NVIDIA format modifiers
Date: Wed, 11 Dec 2019 12:59:22 -0800	[thread overview]
Message-ID: <20191211205922.7096-4-jajones@nvidia.com> (raw)
In-Reply-To: <20191211205922.7096-1-jajones@nvidia.com>

Allow setting the block layout of a nouveau FB
object using DRM format modifiers.  When
specified, the format modifier block layout and
kind overrides the GEM buffer's implicit layout
and kind.  The specified format modifier is
validated against he list of modifiers supported
by the target display hardware.

Signed-off-by: James Jones <jajones@nvidia.com>
---
 drivers/gpu/drm/nouveau/dispnv50/wndw.c   |  8 +--
 drivers/gpu/drm/nouveau/nouveau_display.c | 65 ++++++++++++++++++++++-
 drivers/gpu/drm/nouveau/nouveau_display.h |  2 +
 3 files changed, 69 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv50/wndw.c b/drivers/gpu/drm/nouveau/dispnv50/wndw.c
index 70ad64cb2d34..06c1b18479c1 100644
--- a/drivers/gpu/drm/nouveau/dispnv50/wndw.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/wndw.c
@@ -43,7 +43,7 @@ nv50_wndw_ctxdma_new(struct nv50_wndw *wndw, struct nouveau_framebuffer *fb)
 {
 	struct nouveau_drm *drm = nouveau_drm(fb->base.dev);
 	struct nv50_wndw_ctxdma *ctxdma;
-	const u8    kind = fb->nvbo->kind;
+	const u8    kind = fb->kind;
 	const u32 handle = 0xfb000000 | kind;
 	struct {
 		struct nv_dma_v0 base;
@@ -243,7 +243,7 @@ nv50_wndw_atomic_check_acquire(struct nv50_wndw *wndw, bool modeset,
 	if (asyw->state.fb != armw->state.fb || !armw->visible || modeset) {
 		asyw->image.w = fb->base.width;
 		asyw->image.h = fb->base.height;
-		asyw->image.kind = fb->nvbo->kind;
+		asyw->image.kind = fb->kind;
 
 		ret = nv50_wndw_atomic_check_acquire_rgb(asyw);
 		if (ret) {
@@ -255,9 +255,9 @@ nv50_wndw_atomic_check_acquire(struct nv50_wndw *wndw, bool modeset,
 		if (asyw->image.kind) {
 			asyw->image.layout = 0;
 			if (drm->client.device.info.chipset >= 0xc0)
-				asyw->image.blockh = fb->nvbo->mode >> 4;
+				asyw->image.blockh = fb->tile_mode >> 4;
 			else
-				asyw->image.blockh = fb->nvbo->mode;
+				asyw->image.blockh = fb->tile_mode;
 			asyw->image.blocks[0] = fb->base.pitches[0] / 64;
 			asyw->image.pitch[0] = 0;
 		} else {
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index f1509392d7b7..351b58410e1a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -224,6 +224,50 @@ static const struct drm_framebuffer_funcs nouveau_framebuffer_funcs = {
 	.create_handle = nouveau_user_framebuffer_create_handle,
 };
 
+static int
+nouveau_decode_mod(struct nouveau_drm *drm,
+		   uint64_t modifier,
+		   uint32_t *tile_mode,
+		   uint8_t *kind)
+{
+	struct nouveau_display *disp = nouveau_display(drm->dev);
+	int mod;
+
+	BUG_ON(!tile_mode || !kind);
+
+	if (drm->client.device.info.chipset < 0x50) {
+		return -EINVAL;
+	}
+
+	BUG_ON(!disp->format_modifiers);
+
+	for (mod = 0;
+	     (disp->format_modifiers[mod] != DRM_FORMAT_MOD_INVALID) &&
+	     (disp->format_modifiers[mod] != modifier);
+	     mod++);
+
+	if (disp->format_modifiers[mod] == DRM_FORMAT_MOD_INVALID)
+		return -EINVAL;
+
+	if (modifier == DRM_FORMAT_MOD_LINEAR) {
+		/* tile_mode will not be used in this case */
+		*tile_mode = 0;
+		*kind = 0;
+	} else {
+		/*
+		 * Extract the block height and kind from the corresponding
+		 * modifier fields.  See drm_fourcc.h for details.
+		 */
+		*tile_mode = (uint32_t)(modifier & 0xF);
+		*kind = (uint8_t)((modifier >> 12) & 0xFF);
+
+		if (drm->client.device.info.chipset >= 0xc0)
+			*tile_mode <<= 4;
+	}
+
+	return 0;
+}
+
 static inline uint32_t
 nouveau_get_width_in_blocks(uint32_t stride)
 {
@@ -300,6 +344,8 @@ nouveau_framebuffer_new(struct drm_device *dev,
 	struct nouveau_framebuffer *fb;
 	const struct drm_format_info *info;
 	unsigned int width, height, i;
+	uint32_t tile_mode;
+	uint8_t kind;
 	int ret;
 
         /* YUV overlays have special requirements pre-NV50 */
@@ -322,6 +368,18 @@ nouveau_framebuffer_new(struct drm_device *dev,
 		return -EINVAL;
 	}
 
+	if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
+		if (nouveau_decode_mod(drm, mode_cmd->modifier[0], &tile_mode,
+				       &kind)) {
+			DRM_DEBUG_KMS("Unsupported modifier: 0x%llx\n",
+				      mode_cmd->modifier[0]);
+			return -EINVAL;
+		}
+	} else {
+		tile_mode = nvbo->mode;
+		kind = nvbo->kind;
+	}
+
 	info = drm_get_format_info(dev, mode_cmd);
 
 	for (i = 0; i < info->num_planes; i++) {
@@ -332,11 +390,11 @@ nouveau_framebuffer_new(struct drm_device *dev,
 						      mode_cmd->height,
 						      i);
 
-		if (nvbo->kind) {
+		if (kind) {
 			ret = nouveau_check_bl_size(drm, nvbo,
 						    mode_cmd->offsets[i],
 						    mode_cmd->pitches[i],
-						    height, nvbo->mode);
+						    height, tile_mode);
 			if (ret)
 				return ret;
 		} else {
@@ -352,6 +410,8 @@ nouveau_framebuffer_new(struct drm_device *dev,
 
 	drm_helper_mode_fill_fb_struct(dev, &fb->base, mode_cmd);
 	fb->nvbo = nvbo;
+	fb->tile_mode = tile_mode;
+	fb->kind = kind;
 
 	ret = drm_framebuffer_init(dev, &fb->base, &nouveau_framebuffer_funcs);
 	if (ret)
@@ -625,6 +685,7 @@ nouveau_display_create(struct drm_device *dev)
 
 	dev->mode_config.preferred_depth = 24;
 	dev->mode_config.prefer_shadow = 1;
+	dev->mode_config.allow_fb_modifiers = true;
 
 	if (drm->client.device.info.chipset < 0x11)
 		dev->mode_config.async_page_flip = false;
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.h b/drivers/gpu/drm/nouveau/nouveau_display.h
index c54682f00b01..0dad57b21983 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.h
+++ b/drivers/gpu/drm/nouveau/nouveau_display.h
@@ -15,6 +15,8 @@ struct nouveau_framebuffer {
 	u32 r_handle;
 	u32 r_format;
 	u32 r_pitch;
+	u32 tile_mode;
+	u8 kind;
 	struct nvif_object h_base[4];
 	struct nvif_object h_core;
 };
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2019-12-11 21:04 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-11 20:59 [PATCH 0/3] drm/nouveau: Support NVIDIA format modifiers James Jones
2019-12-11 20:59 ` [PATCH 1/3] drm/nouveau: Add format mod prop to base/ovly/nvdisp James Jones
2019-12-11 20:59 ` [PATCH 2/3] drm/nouveau: Check framebuffer size against bo James Jones
2019-12-11 20:59 ` James Jones [this message]
2019-12-11 21:13   ` [Nouveau] [PATCH 3/3] drm/nouveau: Support NVIDIA format modifiers Ilia Mirkin
2019-12-13  2:51     ` James Jones
2019-12-17  0:27       ` James Jones
2019-12-11 21:01 ` [PATCH 0/3] " James Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191211205922.7096-4-jajones@nvidia.com \
    --to=jajones@nvidia.com \
    --cc=bskeggs@redhat.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=nouveau@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox