From: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v7 05/18] video/hdmi: Add Unpack only function for DRM infoframe
Date: Tue, 11 Feb 2020 09:46:44 +0200 [thread overview]
Message-ID: <20200211074657.231405-6-gwan-gyeong.mun@intel.com> (raw)
In-Reply-To: <20200211074657.231405-1-gwan-gyeong.mun@intel.com>
It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.
In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.
It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
drivers/video/hdmi.c | 58 +++++++++++++++++++++++++++++++-------------
include/linux/hdmi.h | 2 ++
2 files changed, 43 insertions(+), 17 deletions(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 9c82e2a0a411..9818836d82b7 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -1775,20 +1775,18 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
}
/**
- * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * hdmi_drm_infoframe_unpack_only() - unpack binary buffer to a HDMI DRM infoframe
* @frame: HDMI DRM infoframe
* @buffer: source buffer
* @size: size of buffer
*
- * Unpacks the information contained in binary @buffer into a structured
+ * Unpacks the information data block contained in binary @buffer into a structured
* @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
- * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
- * specification.
*
* Returns 0 on success or a negative error code on failure.
*/
-static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
- const void *buffer, size_t size)
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+ const void *buffer, size_t size)
{
const u8 *ptr = buffer;
const u8 *temp;
@@ -1797,23 +1795,13 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
int ret;
int i;
- if (size < HDMI_INFOFRAME_SIZE(DRM))
- return -EINVAL;
-
- if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
- ptr[1] != 1 ||
- ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
- return -EINVAL;
-
- if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+ if (size < HDMI_DRM_INFOFRAME_SIZE)
return -EINVAL;
ret = hdmi_drm_infoframe_init(frame);
if (ret)
return ret;
- ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
frame->eotf = ptr[0] & 0x7;
frame->metadata_type = ptr[1] & 0x7;
@@ -1837,6 +1825,42 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
return 0;
}
+EXPORT_SYMBOL(hdmi_drm_infoframe_unpack_only);
+
+/**
+ * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * @frame: HDMI DRM infoframe
+ * @buffer: source buffer
+ * @size: size of buffer
+ *
+ * Unpacks the information contained in binary @buffer into a structured
+ * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
+ * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
+ const void *buffer, size_t size)
+{
+ const u8 *ptr = buffer;
+ int ret;
+
+ if (size < HDMI_INFOFRAME_SIZE(DRM))
+ return -EINVAL;
+
+ if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
+ ptr[1] != 1 ||
+ ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
+ return -EINVAL;
+
+ if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+ return -EINVAL;
+
+ ret = hdmi_drm_infoframe_unpack_only(frame, ptr + HDMI_INFOFRAME_HEADER_SIZE,
+ size - HDMI_INFOFRAME_HEADER_SIZE);
+ return ret;
+}
/**
* hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 9918a6c910c5..afb43efc03e0 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -219,6 +219,8 @@ ssize_t hdmi_drm_infoframe_pack(struct hdmi_drm_infoframe *frame, void *buffer,
ssize_t hdmi_drm_infoframe_pack_only(const struct hdmi_drm_infoframe *frame,
void *buffer, size_t size);
int hdmi_drm_infoframe_check(struct hdmi_drm_infoframe *frame);
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+ const void *buffer, size_t size);
enum hdmi_spd_sdi {
HDMI_SPD_SDI_UNKNOWN,
--
2.25.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-02-11 7:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-11 7:46 [PATCH v7 00/18] In order to readout DP SDPs, refactors the handling of DP SDPs Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 01/18] drm: Add DP1.4 VSC SDP Payload related Data Structures Gwan-gyeong Mun
2020-03-16 5:03 ` Shankar, Uma
2020-02-11 7:46 ` [PATCH v7 02/18] drm/i915/dp: Add compute routine for DP VSC SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 03/18] drm/i915/dp: Add compute routine for DP HDR Metadata Infoframe SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 04/18] drm/i915/dp: Add writing of DP SDPs Gwan-gyeong Mun
2020-03-16 5:06 ` Shankar, Uma
2020-03-20 12:22 ` Jani Nikula
2020-02-11 7:46 ` Gwan-gyeong Mun [this message]
2020-03-20 11:13 ` [Intel-gfx] [PATCH v7 05/18] video/hdmi: Add Unpack only function for DRM infoframe Jani Nikula
2020-03-20 11:32 ` Jani Nikula
2020-03-20 11:57 ` Laurent Pinchart
2020-03-27 7:27 ` Mun, Gwan-gyeong
2020-03-27 12:56 ` Ville Syrjälä
2020-03-30 16:22 ` Mun, Gwan-gyeong
2020-02-11 7:46 ` [PATCH v7 06/18] drm/i915/dp: Read out DP SDPs Gwan-gyeong Mun
2020-03-16 5:10 ` [Intel-gfx] " Shankar, Uma
2020-02-11 7:46 ` [PATCH v7 07/18] drm: Add logging function for DP VSC SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 08/18] drm/i915: Include HDMI DRM infoframe in the crtc state dump Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 09/18] drm/i915: Include DP HDR Metadata Infoframe SDP " Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 10/18] drm/i915: Include DP VSC " Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 11/18] drm/i915: Program DP SDPs with computed configs Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 12/18] drm/i915: Add state readout for DP HDR Metadata Infoframe SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 13/18] drm/i915: Add state readout for DP VSC SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 14/18] drm/i915: Fix enabled infoframe states of lspcon Gwan-gyeong Mun
2020-03-16 5:22 ` Shankar, Uma
2020-02-11 7:46 ` [PATCH v7 15/18] drm/i915: Program DP SDPs on pipe updates Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 16/18] drm/i915: Stop sending DP SDPs on ddi disable Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 17/18] drm/i915/dp: Add compute routine for DP PSR VSC SDP Gwan-gyeong Mun
2020-02-11 7:46 ` [PATCH v7 18/18] drm/i915/psr: Use new DP VSC SDP compute routine on PSR Gwan-gyeong Mun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200211074657.231405-6-gwan-gyeong.mun@intel.com \
--to=gwan-gyeong.mun@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).