[PATCH v3 0/2] Support DRM bridges on NVIDIA Tegra

[Dmitry Osipenko <digetx@gmail.com>]

Hello,

This small series adds initial support for the DRM bridges to NVIDIA Tegra
DRM driver. This is required by newer device-trees where we model the LVDS
encoder bridge properly.

Changelog:

v3: - Following recommendation from Sam Ravnborg, the new bridge attachment
      model is now being used, i.e. we ask bridge to *not* create a connector
      using the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.

    - The bridge is now created only for the RGB (LVDS) output, and only
      when necessary. For now we don't need bridges for HDMI or DSI outputs.

    - I noticed that we're leaking OF node in the panel's error code path,
      this is fixed now by the new patch "Don't leak OF node on error".

v2: - Added the new "rgb: Don't register connector if bridge is used"
      patch, which hides the unused connector provided by the Tegra DRM
      driver when bridge is used, since bridge provides its own connector
      to us.

    - Please notice that the first "Support DRM bridges" patch was previously
      sent out as a standalone v1 change.


Dmitry Osipenko (2):
  drm/tegra: output: Don't leak OF node on error
  drm/tegra: output: rgb: Support LVDS encoder bridge

 drivers/gpu/drm/tegra/drm.h    |  2 ++
 drivers/gpu/drm/tegra/output.c | 19 ++++++++++++++-----
 drivers/gpu/drm/tegra/rgb.c    | 34 ++++++++++++++++++++++++++++++++++
 3 files changed, 50 insertions(+), 5 deletions(-)

-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel