dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, daniel@ffwll.ch, kraxel@redhat.com,
	noralf@tronnes.org, sam@ravnborg.org, emil.velikov@collabora.com,
	john.p.donnelly@oracle.com
Cc: John Donnelly <John.p.donnelly@oracle.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v3 07/15] drm/mgag200: Set pitch in a separate helper function
Date: Fri, 15 May 2020 10:32:25 +0200	[thread overview]
Message-ID: <20200515083233.32036-8-tzimmermann@suse.de> (raw)
In-Reply-To: <20200515083233.32036-1-tzimmermann@suse.de>

The framebuffer's pitch is now set in mgag200_set_offset().

v2:
	* move offset and bpp-shift calculation into helper functions
	* use u8 instead of uint8_t
	* add MGAREG_CRTCEXT0_OFFSET_MASK

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
---
 drivers/gpu/drm/mgag200/mgag200_mode.c | 57 +++++++++++++++++++-------
 drivers/gpu/drm/mgag200/mgag200_reg.h  |  2 +
 2 files changed, 45 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 4dba0a379c263..dee7838d7d368 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1002,6 +1002,48 @@ static void mgag200_set_mode_regs(struct mga_device *mdev,
 	mga_crtc_set_plls(mdev, mode->clock);
 }
 
+static u8 mgag200_get_bpp_shift(struct mga_device *mdev,
+				const struct drm_format_info *format)
+{
+	return mdev->bpp_shifts[format->cpp[0] - 1];
+}
+
+/*
+ * Calculates the HW offset value from the framebuffer's pitch. The
+ * offset is a multiple of the pixel size and depends on the display
+ * format.
+ */
+static u32 mgag200_calculate_offset(struct mga_device *mdev,
+				    const struct drm_framebuffer *fb)
+{
+	u32 offset = fb->pitches[0] / fb->format->cpp[0];
+	u8 bppshift = mgag200_get_bpp_shift(mdev, fb->format);
+
+	if (fb->format->cpp[0] * 8 == 24)
+		offset = (offset * 3) >> (4 - bppshift);
+	else
+		offset = offset >> (4 - bppshift);
+
+	return offset;
+}
+
+static void mgag200_set_offset(struct mga_device *mdev,
+			       const struct drm_framebuffer *fb)
+{
+	u8 crtc13, crtcext0;
+	u32 offset = mgag200_calculate_offset(mdev, fb);
+
+	RREG_ECRT(0, crtcext0);
+
+	crtc13 = offset & 0xff;
+
+	crtcext0 &= ~MGAREG_CRTCEXT0_OFFSET_MASK;
+	crtcext0 |= (offset >> 4) & MGAREG_CRTCEXT0_OFFSET_MASK;
+
+	WREG_CRT(0x13, crtc13);
+	WREG_ECRT(0x00, crtcext0);
+}
+
 static int mga_crtc_mode_set(struct drm_crtc *crtc,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode,
@@ -1010,7 +1052,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct mga_device *mdev = to_mga_device(dev);
 	const struct drm_framebuffer *fb = crtc->primary->fb;
-	int pitch;
 	int option = 0, option2 = 0;
 	int i;
 	unsigned char misc = 0;
@@ -1121,12 +1162,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 	WREG_SEQ(3, 0);
 	WREG_SEQ(4, 0xe);
 
-	pitch = fb->pitches[0] / fb->format->cpp[0];
-	if (fb->format->cpp[0] * 8 == 24)
-		pitch = (pitch * 3) >> (4 - bppshift);
-	else
-		pitch = pitch >> (4 - bppshift);
-
 	WREG_GFX(0, 0);
 	WREG_GFX(1, 0);
 	WREG_GFX(2, 0);
@@ -1143,20 +1178,15 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 	WREG_CRT(13, 0);
 	WREG_CRT(14, 0);
 	WREG_CRT(15, 0);
-	WREG_CRT(19, pitch & 0xFF);
-
-	ext_vga[0] = 0;
 
 	/* TODO interlace */
 
-	ext_vga[0] |= (pitch & 0x300) >> 4;
 	if (fb->format->cpp[0] * 8 == 24)
 		ext_vga[3] = (((1 << bppshift) * 3) - 1) | 0x80;
 	else
 		ext_vga[3] = ((1 << bppshift) - 1) | 0x80;
 	ext_vga[4] = 0;
 
-	WREG_ECRT(0, ext_vga[0]);
 	WREG_ECRT(3, ext_vga[3]);
 	WREG_ECRT(4, ext_vga[4]);
 
@@ -1170,8 +1200,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 		WREG_ECRT(6, 0);
 	}
 
-	WREG_ECRT(0, ext_vga[0]);
-
 	misc = RREG8(MGA_MISC_IN);
 	misc |= MGAREG_MISC_IOADSEL |
 		MGAREG_MISC_RAMMAPEN |
@@ -1179,6 +1207,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 	WREG8(MGA_MISC_OUT, misc);
 
 	mga_crtc_do_set_base(mdev, fb, old_fb);
+	mgag200_set_offset(mdev, fb);
 
 	mgag200_set_mode_regs(mdev, mode);
 
diff --git a/drivers/gpu/drm/mgag200/mgag200_reg.h b/drivers/gpu/drm/mgag200/mgag200_reg.h
index 0ba6e15e97106..cd08dee29b06f 100644
--- a/drivers/gpu/drm/mgag200/mgag200_reg.h
+++ b/drivers/gpu/drm/mgag200/mgag200_reg.h
@@ -240,6 +240,8 @@
 #define MGAREG_CRTCEXT_INDEX	0x1fde
 #define MGAREG_CRTCEXT_DATA	0x1fdf
 
+#define MGAREG_CRTCEXT0_OFFSET_MASK	GENMASK(5, 4)
+
 /* Cursor X and Y position */
 #define MGA_CURPOSXL 0x3c0c
 #define MGA_CURPOSXH 0x3c0d
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-05-15  8:32 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  8:32 [PATCH v3 00/15] drm/mgag200: Convert to atomic modesetting Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 01/15] drm/mgag200: Remove HW cursor Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 02/15] drm/mgag200: Clean up mga_set_start_address() Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 03/15] drm/mgag200: Clean up mga_crtc_do_set_base() Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 04/15] drm/mgag200: Move mode-setting code into separate helper function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 05/15] drm/mgag200: Split MISC register update into PLL selection, SYNC and I/O Thomas Zimmermann
2020-06-03  9:09   ` [drm/mgag200] e44e907dd8: phoronix-test-suite.glmark2.800x600.score -64.9% regression kernel test robot
2020-06-15 20:58     ` Emil Velikov
2020-06-16  3:10       ` Rong Chen
2020-06-16  3:29         ` [LKP] " Rong Chen
2020-06-16 13:49         ` Emil Velikov
2020-06-17  1:35           ` Rong Chen
2020-06-16 13:49         ` Thomas Zimmermann
2020-06-17  1:42           ` Rong Chen
2020-06-16 14:24       ` Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 06/15] drm/mgag200: Update mode registers after plane registers Thomas Zimmermann
2020-05-15  8:32 ` Thomas Zimmermann [this message]
2020-05-15  8:32 ` [PATCH v3 08/15] drm/mgag200: Set primary plane's format in separate helper function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 09/15] drm/mgag200: Move TAGFIFO reset into separate function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 10/15] drm/mgag200: Move hiprilvl setting into separate functions Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 11/15] drm/mgag200: Move register initialization into separate function Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 12/15] drm/mgag200: Remove out-commented suspend/resume helpers Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 13/15] drm/mgag200: Use simple-display data structures Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 14/15] drm/mgag200: Convert to simple KMS helper Thomas Zimmermann
2020-05-15  8:32 ` [PATCH v3 15/15] drm/mgag200: Replace VRAM helpers with SHMEM helpers Thomas Zimmermann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515083233.32036-8-tzimmermann@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=emil.velikov@collabora.com \
    --cc=john.p.donnelly@oracle.com \
    --cc=kraxel@redhat.com \
    --cc=noralf@tronnes.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox