[PATCH AUTOSEL 5.8 07/29] hyperv_fb: Update screen_info after removing old framebuffer

[PATCH AUTOSEL 5.8 07/29] hyperv_fb: Update screen_info after removing old framebuffer

[Sasha Levin]

From: Kairui Song <kasong@redhat.com>

[ Upstream commit 3cb73bc3fa2a3cb80b88aa63b48409939e0d996b ]

On gen2 HyperV VM, hyperv_fb will remove the old framebuffer, and the
new allocated framebuffer address could be at a differnt location,
and it might be no longer a VGA framebuffer.

Update screen_info so that after kexec the kernel won't try to reuse
the old invalid/stale framebuffer address as VGA, corrupting memory.

[ mingo: Tidied up the changelog. ]

Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: Wei Hu <weh@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Link: https://lore.kernel.org/r/20201014092429.1415040-3-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hyperv_fb.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index e4c3c8b65da44..4235ea7a6c40c 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -1114,8 +1114,15 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 getmem_done:
 	remove_conflicting_framebuffers(info->apertures,
 					KBUILD_MODNAME, false);
-	if (!gen2vm)
+
+	if (gen2vm) {
+		/* framebuffer is reallocated, clear screen_info to avoid misuse from kexec */
+		screen_info.lfb_size = 0;
+		screen_info.lfb_base = 0;
+		screen_info.orig_video_isVGA = 0;
+	} else {
 		pci_dev_put(pdev);
+	}
 	kfree(info->apertures);
 
 	return 0;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 11/29] drm/sun4i: frontend: Rework a bit the phase data

[Sasha Levin]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 84c971b356379c621df595bd00c3114579dfa59f ]

The scaler filter phase setup in the allwinner kernel has two different
cases for setting up the scaler filter, the first one using different phase
parameters for the two channels, and the second one reusing the first
channel parameters on the second channel.

The allwinner kernel has a third option where the horizontal phase of the
second channel will be set to a different value than the vertical one (and
seems like it's the same value than one used on the first channel).
However, that code path seems to never be taken, so we can ignore it for
now, and it's essentially what we're doing so far as well.

Since we will have always the same values across each components of the
filter setup for a given channel, we can simplify a bit our frontend
structure by only storing the phase value we want to apply to a given
channel.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_frontend.c | 34 ++++++--------------------
 drivers/gpu/drm/sun4i/sun4i_frontend.h |  6 +----
 2 files changed, 9 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
index ec2a032e07b97..7462801b1fa8e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -443,17 +443,17 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 	 * related to the scaler FIR filter phase parameters.
 	 */
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG,
-		     frontend->data->ch_phase[0].horzphase);
+		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG,
-		     frontend->data->ch_phase[1].horzphase);
+		     frontend->data->ch_phase[1]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG,
-		     frontend->data->ch_phase[0].vertphase[0]);
+		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG,
-		     frontend->data->ch_phase[1].vertphase[0]);
+		     frontend->data->ch_phase[1]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG,
-		     frontend->data->ch_phase[0].vertphase[1]);
+		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG,
-		     frontend->data->ch_phase[1].vertphase[1]);
+		     frontend->data->ch_phase[1]);
 
 	/*
 	 * Checking the input format is sufficient since we currently only
@@ -687,30 +687,12 @@ static const struct dev_pm_ops sun4i_frontend_pm_ops = {
 };
 
 static const struct sun4i_frontend_data sun4i_a10_frontend = {
-	.ch_phase		= {
-		{
-			.horzphase = 0,
-			.vertphase = { 0, 0 },
-		},
-		{
-			.horzphase = 0xfc000,
-			.vertphase = { 0xfc000, 0xfc000 },
-		},
-	},
+	.ch_phase		= { 0x000, 0xfc000 },
 	.has_coef_rdy		= true,
 };
 
 static const struct sun4i_frontend_data sun8i_a33_frontend = {
-	.ch_phase		= {
-		{
-			.horzphase = 0x400,
-			.vertphase = { 0x400, 0x400 },
-		},
-		{
-			.horzphase = 0x400,
-			.vertphase = { 0x400, 0x400 },
-		},
-	},
+	.ch_phase		= { 0x400, 0x400 },
 	.has_coef_access_ctrl	= true,
 };
 
diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h
index 0c382c1ddb0fe..2e7b76e50c2ba 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
@@ -115,11 +115,7 @@ struct reset_control;
 struct sun4i_frontend_data {
 	bool	has_coef_access_ctrl;
 	bool	has_coef_rdy;
-
-	struct {
-		u32	horzphase;
-		u32	vertphase[2];
-	} ch_phase[2];
+	u32	ch_phase[2];
 };
 
 struct sun4i_frontend {
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 12/29] drm/sun4i: frontend: Reuse the ch0 phase for RGB formats

[Sasha Levin]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit 2db9ef9d9e6ea89a9feb5338f58d1f8f83875577 ]

When using the scaler on the A10-like frontend with single-planar formats,
the current code will setup the channel 0 filter (used for the R or Y
component) with a different phase parameter than the channel 1 filter (used
for the G/B or U/V components).

This creates a bleed out that keeps repeating on of the last line of the
RGB plane across the rest of the display. The Allwinner BSP either applies
the same phase parameter over both channels or use a separate one, the
condition being whether the input format is YUV420 or not.

Since YUV420 is both subsampled and multi-planar, and since YUYV is
subsampled but single-planar, we can rule out the subsampling and assume
that the condition is actually whether the format is single or
multi-planar. And it looks like applying the same phase parameter over both
channels for single-planar formats fixes our issue, while we keep the
multi-planar formats working properly.

Reported-by: Taras Galchenko <tpgalchenko@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_frontend.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
index 7462801b1fa8e..c4959d9e16391 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -407,6 +407,7 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 	struct drm_framebuffer *fb = state->fb;
 	const struct drm_format_info *format = fb->format;
 	uint64_t modifier = fb->modifier;
+	unsigned int ch1_phase_idx;
 	u32 out_fmt_val;
 	u32 in_fmt_val, in_mod_val, in_ps_val;
 	unsigned int i;
@@ -442,18 +443,19 @@ int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
 	 * I have no idea what this does exactly, but it seems to be
 	 * related to the scaler FIR filter phase parameters.
 	 */
+	ch1_phase_idx = (format->num_planes > 1) ? 1 : 0;
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG,
 		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG,
-		     frontend->data->ch_phase[1]);
+		     frontend->data->ch_phase[ch1_phase_idx]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG,
 		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG,
-		     frontend->data->ch_phase[1]);
+		     frontend->data->ch_phase[ch1_phase_idx]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG,
 		     frontend->data->ch_phase[0]);
 	regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG,
-		     frontend->data->ch_phase[1]);
+		     frontend->data->ch_phase[ch1_phase_idx]);
 
 	/*
 	 * Checking the input format is sufficient since we currently only
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 13/29] drm/sun4i: frontend: Fix the scaler phase on A33

[Sasha Levin]

From: Maxime Ripard <maxime@cerno.tech>

[ Upstream commit e3190b5e9462067714d267c40d8c8c1d0463dda3 ]

The A33 has a different phase parameter in the Allwinner BSP on the
channel1 than the one currently applied. Fix this.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/sun4i_frontend.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
index c4959d9e16391..7186ba73d8e14 100644
--- a/drivers/gpu/drm/sun4i/sun4i_frontend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -694,7 +694,7 @@ static const struct sun4i_frontend_data sun4i_a10_frontend = {
 };
 
 static const struct sun4i_frontend_data sun8i_a33_frontend = {
-	.ch_phase		= { 0x400, 0x400 },
+	.ch_phase		= { 0x400, 0xfc400 },
 	.has_coef_access_ctrl	= true,
 };
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 14/29] drm/v3d: Fix double free in v3d_submit_cl_ioctl()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 897dbea6b716c0f2c5bcd4ba1eb4d809caba290c ]

Originally this error path used to leak "bin" but then we accidentally
applied two separate commits to fix it and ended up with a double free.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201026094905.GA1634423@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/v3d/v3d_gem.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 09a7639cf161f..0e0f1cc3e283a 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -568,7 +568,6 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
 		ret = v3d_job_init(v3d, file_priv, &bin->base,
 				   v3d_job_free, args->in_sync_bcl);
 		if (ret) {
-			kfree(bin);
 			v3d_job_put(&render->base);
 			kfree(bin);
 			return ret;
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 19/29] drm/amdgpu: add DID for navi10 blockchain SKU

[Sasha Levin]

From: "Tianci.Yin" <tianci.yin@amd.com>

[ Upstream commit 8942881144a7365143f196f5eafed24783a424a3 ]

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index d73924e35a57e..92844ba2c9c4e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1016,6 +1016,7 @@ static const struct pci_device_id pciidlist[] = {
 	{0x1002, 0x7319, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
 	{0x1002, 0x731A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
 	{0x1002, 0x731B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
+	{0x1002, 0x731E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
 	{0x1002, 0x731F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI10},
 	/* Navi14 */
 	{0x1002, 0x7340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI14},
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 24/29] drm/vc4: drv: Add error handding for bind

[Sasha Levin]

From: Hoegeun Kwon <hoegeun.kwon@samsung.com>

[ Upstream commit 9ce0af3e9573fb84c4c807183d13ea2a68271e4b ]

There is a problem that if vc4_drm bind fails, a memory leak occurs on
the drm_property_create side. Add error handding for drm_mode_config.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027041442.30352-2-hoegeun.kwon@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_drv.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 76f93b6627660..1dac8e28c7346 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -306,6 +306,7 @@ static int vc4_drm_bind(struct device *dev)
 	component_unbind_all(dev, drm);
 gem_destroy:
 	vc4_gem_destroy(drm);
+	drm_mode_config_cleanup(drm);
 	vc4_bo_cache_destroy(drm);
 dev_put:
 	drm_dev_put(drm);
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 27/29] drm/nouveau/nouveau: fix the start/end range for migration

[Sasha Levin]

From: Ralph Campbell <rcampbell@nvidia.com>

[ Upstream commit cfa736f5a6f31ca8a05459b5720aac030247ad1b ]

The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_svm.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c
index 6586d9d398740..11b7cc3625cf8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_svm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_svm.c
@@ -116,11 +116,11 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 	struct nouveau_cli *cli = nouveau_cli(file_priv);
 	struct drm_nouveau_svm_bind *args = data;
 	unsigned target, cmd, priority;
-	unsigned long addr, end, size;
+	unsigned long addr, end;
 	struct mm_struct *mm;
 
 	args->va_start &= PAGE_MASK;
-	args->va_end &= PAGE_MASK;
+	args->va_end = ALIGN(args->va_end, PAGE_SIZE);
 
 	/* Sanity check arguments */
 	if (args->reserved0 || args->reserved1)
@@ -129,8 +129,6 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 		return -EINVAL;
 	if (args->va_start >= args->va_end)
 		return -EINVAL;
-	if (!args->npages)
-		return -EINVAL;
 
 	cmd = args->header >> NOUVEAU_SVM_BIND_COMMAND_SHIFT;
 	cmd &= NOUVEAU_SVM_BIND_COMMAND_MASK;
@@ -162,12 +160,6 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 	if (args->stride)
 		return -EINVAL;
 
-	size = ((unsigned long)args->npages) << PAGE_SHIFT;
-	if ((args->va_start + size) <= args->va_start)
-		return -EINVAL;
-	if ((args->va_start + size) > args->va_end)
-		return -EINVAL;
-
 	/*
 	 * Ok we are ask to do something sane, for now we only support migrate
 	 * commands but we will add things like memory policy (what to do on
@@ -182,7 +174,7 @@ nouveau_svmm_bind(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	for (addr = args->va_start, end = args->va_start + size; addr < end;) {
+	for (addr = args->va_start, end = args->va_end; addr < end;) {
 		struct vm_area_struct *vma;
 		unsigned long next;
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.8 28/29] drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"

[Sasha Levin]

From: Karol Herbst <kherbst@redhat.com>

[ Upstream commit 925681454d7b557d404b5d28ef4469fac1b2e105 ]

we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_gem.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index c5ee5b7364a09..ee5fec1ad9a46 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -197,7 +197,8 @@ nouveau_gem_new(struct nouveau_cli *cli, u64 size, int align, uint32_t domain,
 	 * to the caller, instead of a normal nouveau_bo ttm reference. */
 	ret = drm_gem_object_init(drm->dev, &nvbo->bo.base, size);
 	if (ret) {
-		nouveau_bo_ref(NULL, &nvbo);
+		drm_gem_object_release(&nvbo->bo.base);
+		kfree(nvbo);
 		return ret;
 	}
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel