dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Nikhil Devshatwar <nikhil.nd@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Sekhar Nori <nsekhar@ti.com>, Yuti Amonkar <yamonkar@cadence.com>,
	dri-devel@lists.freedesktop.org,
	Swapnil Jakhade <sjakhade@cadence.com>
Subject: Re: [PATCH v3 2/6] drm/bridge: tfp410: Support format negotiation hooks
Date: Mon, 30 Nov 2020 11:40:12 +0200	[thread overview]
Message-ID: <20201130094012.GC4141@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20201119160134.9244-3-nikhil.nd@ti.com>

Hi Nikhil,

Thank you for the patch.

On Thu, Nov 19, 2020 at 09:31:30PM +0530, Nikhil Devshatwar wrote:
> With new connector model, tfp410 will not create the connector and
> SoC driver will rely on format negotiation to setup the encoder format.
> 
> Support format negotiations hooks in the drm_bridge_funcs.
> Use helper functions for state management.
> 
> Output format is expected to be MEDIA_BUS_FMT_FIXED
> Input format is the one selected by the bridge from DT properties.
> 
> Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> 
> Notes:
>     changes from v1:
>     * Use only MEDIA_BUS_FMT_FIXED for output
> 
>  drivers/gpu/drm/bridge/ti-tfp410.c | 33 ++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
> index ba3fa2a9b8a4..3def9acba86b 100644
> --- a/drivers/gpu/drm/bridge/ti-tfp410.c
> +++ b/drivers/gpu/drm/bridge/ti-tfp410.c
> @@ -204,12 +204,45 @@ static enum drm_mode_status tfp410_mode_valid(struct drm_bridge *bridge,
>  	return MODE_OK;
>  }
>  
> +static u32 *tfp410_get_input_bus_fmts(struct drm_bridge *bridge,
> +				      struct drm_bridge_state *bridge_state,
> +				      struct drm_crtc_state *crtc_state,
> +				      struct drm_connector_state *conn_state,
> +				      u32 output_fmt,
> +				      unsigned int *num_input_fmts)
> +{
> +	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
> +	u32 *input_fmts;
> +
> +	*num_input_fmts = 0;
> +
> +	/*
> +	 * Output of tfp410 is DVI, which is TMDS.
> +	 * There is no media format defined for this.
> +	 * Using MEDIA_BUS_FMT_FIXED for now.
> +	 */
> +	if (output_fmt != MEDIA_BUS_FMT_FIXED)
> +		return NULL;
> +
> +	input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL);
> +	if (!input_fmts)
> +		return NULL;
> +
> +	*num_input_fmts = 1;
> +	input_fmts[0] = dvi->bus_format;
> +	return input_fmts;
> +}
> +
>  static const struct drm_bridge_funcs tfp410_bridge_funcs = {
>  	.attach		= tfp410_attach,
>  	.detach		= tfp410_detach,
>  	.enable		= tfp410_enable,
>  	.disable	= tfp410_disable,
>  	.mode_valid	= tfp410_mode_valid,
> +	.atomic_reset = drm_atomic_helper_bridge_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +	.atomic_get_input_bus_fmts = tfp410_get_input_bus_fmts,
>  };
>  
>  static const struct drm_bridge_timings tfp410_default_timings = {

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-11-30  9:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 16:01 [PATCH v3 0/6] drm/tidss: Use new connector model for tidss Nikhil Devshatwar
2020-11-19 16:01 ` [PATCH v3 1/6] drm: bridge: Propagate the bus flags from bridge->timings Nikhil Devshatwar
2020-11-30  9:36   ` Laurent Pinchart
2020-11-30  9:46     ` Tomi Valkeinen
2020-11-30  9:47       ` Laurent Pinchart
2020-11-30 10:02         ` Tomi Valkeinen
2020-11-30 10:04           ` Tomi Valkeinen
2020-11-30 18:59             ` Laurent Pinchart
2020-12-01 10:52               ` Nikhil Devshatwar
2020-11-19 16:01 ` [PATCH v3 2/6] drm/bridge: tfp410: Support format negotiation hooks Nikhil Devshatwar
2020-11-30  9:40   ` Laurent Pinchart [this message]
2020-11-19 16:01 ` [PATCH v3 3/6] drm/bridge: mhdp8546: Add minimal format negotiation Nikhil Devshatwar
2020-11-19 16:01 ` [PATCH v3 4/6] drm/tidss: Set bus_format correctly from bridge/connector Nikhil Devshatwar
2020-11-25 12:51   ` Tomi Valkeinen
2020-11-30  6:35     ` Nikhil Devshatwar
2020-11-30  9:46       ` Laurent Pinchart
2020-12-01 10:57         ` Nikhil Devshatwar
2020-12-01 15:53         ` Tomi Valkeinen
2020-11-30  9:45   ` Laurent Pinchart
2020-12-01 10:52     ` Nikhil Devshatwar
2020-11-19 16:01 ` [PATCH v3 5/6] drm/tidss: Move to newer connector model Nikhil Devshatwar
2020-11-19 16:01 ` [PATCH v3 6/6] drm/bridge: cdns-mhdp8546: Fix the interrupt enable/disable Nikhil Devshatwar
2020-11-23 14:54   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201130094012.GC4141@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=nikhil.nd@ti.com \
    --cc=nsekhar@ti.com \
    --cc=sjakhade@cadence.com \
    --cc=tomi.valkeinen@ti.com \
    --cc=yamonkar@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox