dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Sam Ravnborg <sam@ravnborg.org>, Peter Rosin <peda@axentia.se>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 2/2] drm/atmel-hlcdc: Convert to Linux IRQ interfaces
Date: Sun, 11 Jul 2021 11:19:26 +0200	[thread overview]
Message-ID: <20210711091926.552861-3-sam@ravnborg.org> (raw)
In-Reply-To: <20210711091926.552861-1-sam@ravnborg.org>

The drm mid-layer for irq's is not relevant for atomic display drivers,
and will be available only for legacy drivers in the future.
Drop usage in the atmel hlcdc driver.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
index f67363188cbc..6b3f353e1cc7 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c
@@ -22,7 +22,6 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
-#include <drm/drm_irq.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
 
@@ -521,9 +520,8 @@ atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc,
 	return MODE_OK;
 }
 
-static int atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev)
+static int atmel_hlcdc_dc_irq_postinstall(struct atmel_hlcdc_dc *dc)
 {
-	struct atmel_hlcdc_dc *dc = dev->dev_private;
 	unsigned int cfg = 0;
 	int i;
 
@@ -538,9 +536,8 @@ static int atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-static void atmel_hlcdc_dc_irq_uninstall(struct drm_device *dev)
+static void atmel_hlcdc_dc_irq_reset(struct atmel_hlcdc_dc *dc)
 {
-	struct atmel_hlcdc_dc *dc = dev->dev_private;
 	unsigned int isr;
 
 	regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff);
@@ -672,12 +669,14 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev)
 	drm_mode_config_reset(dev);
 
 	pm_runtime_get_sync(dev->dev);
-	ret = drm_irq_install(dev, dc->hlcdc->irq);
+	atmel_hlcdc_dc_irq_reset(dc);
+	ret = request_irq(dc->hlcdc->irq, atmel_hlcdc_dc_irq_handler, 0, dev->driver->name, dev);
 	pm_runtime_put_sync(dev->dev);
 	if (ret < 0) {
 		dev_err(dev->dev, "failed to install IRQ handler\n");
 		goto err_periph_clk_disable;
 	}
+	atmel_hlcdc_dc_irq_postinstall(dc);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -701,7 +700,9 @@ static void atmel_hlcdc_dc_unload(struct drm_device *dev)
 	drm_mode_config_cleanup(dev);
 
 	pm_runtime_get_sync(dev->dev);
-	drm_irq_uninstall(dev);
+
+	atmel_hlcdc_dc_irq_reset(dc);
+	free_irq(dc->hlcdc->irq, dev);
 	pm_runtime_put_sync(dev->dev);
 
 	dev->dev_private = NULL;
@@ -714,10 +715,6 @@ DEFINE_DRM_GEM_CMA_FOPS(fops);
 
 static const struct drm_driver atmel_hlcdc_dc_driver = {
 	.driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
-	.irq_handler = atmel_hlcdc_dc_irq_handler,
-	.irq_preinstall = atmel_hlcdc_dc_irq_uninstall,
-	.irq_postinstall = atmel_hlcdc_dc_irq_postinstall,
-	.irq_uninstall = atmel_hlcdc_dc_irq_uninstall,
 	DRM_GEM_CMA_DRIVER_OPS,
 	.fops = &fops,
 	.name = "atmel-hlcdc",
-- 
2.30.2


  parent reply	other threads:[~2021-07-11  9:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-11  9:19 [PATCH v1 0/2] drm/atmel-hlcdc: drop use of drm_irq mid-layer Sam Ravnborg
2021-07-11  9:19 ` [PATCH v1 1/2] drm/atmel-hlcdc: Move interrupt helper funtions Sam Ravnborg
2021-07-11  9:19 ` Sam Ravnborg [this message]
2021-07-15 21:55 ` [PATCH v1 0/2] drm/atmel-hlcdc: drop use of drm_irq mid-layer Dan.Sneddon
2021-07-15 22:08   ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210711091926.552861-3-sam@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=claudiu.beznea@microchip.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=peda@axentia.se \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox