From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
Jernej Skrabec <jernej.skrabec@siol.net>,
Neil Armstrong <narmstrong@baylibre.com>,
Jonas Karlman <jonas@kwiboo.se>,
Andrzej Hajda <a.hajda@samsung.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 3/4] drm/bridge: tc358767: Move bridge endpoint parsing into dedicated function
Date: Sat, 27 Nov 2021 04:24:04 +0100 [thread overview]
Message-ID: <20211127032405.283435-3-marex@denx.de> (raw)
In-Reply-To: <20211127032405.283435-1-marex@denx.de>
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. In order to support the rest of the modes without
making the tc_probe() overly long, split the bridge endpoint parsing
into dedicated function, where the necessary logic to detect the bridge
mode based on which endpoints are connected, can be implemented.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
drivers/gpu/drm/bridge/tc358767.c | 30 +++++++++++++++++++++---------
1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index f7fbf6f673e9..0e16ae2461fd 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1612,19 +1612,12 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
-static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int tc_probe_bridge_mode(struct tc_data *tc)
{
- struct device *dev = &client->dev;
+ struct device *dev = tc->dev;
struct drm_panel *panel;
- struct tc_data *tc;
int ret;
- tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
- if (!tc)
- return -ENOMEM;
-
- tc->dev = dev;
-
/* port@2 is the output port */
ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
if (ret && ret != -ENODEV)
@@ -1643,6 +1636,25 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
}
+ return ret;
+}
+
+static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct tc_data *tc;
+ int ret;
+
+ tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
+ if (!tc)
+ return -ENOMEM;
+
+ tc->dev = dev;
+
+ ret = tc_probe_bridge_mode(tc);
+ if (ret)
+ return ret;
+
/* Shut down GPIO is optional */
tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
if (IS_ERR(tc->sd_gpio))
--
2.33.0
next prev parent reply other threads:[~2021-11-27 3:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-27 3:24 [PATCH 1/4] dt-bindings: display: bridge: tc358867: Document DPI output support Marek Vasut
2021-11-27 3:24 ` [PATCH 2/4] drm/bridge: tc358767: Move hardware init to enable callback Marek Vasut
2021-12-06 18:01 ` Dave Stevenson
2021-12-06 20:24 ` Marek Vasut
2021-12-07 13:34 ` Dave Stevenson
2021-12-07 13:59 ` Marek Vasut
2021-12-07 16:28 ` Dave Stevenson
2021-12-07 16:43 ` Marek Vasut
2021-11-27 3:24 ` Marek Vasut [this message]
2021-11-27 3:24 ` [PATCH 4/4] drm/bridge: tc358767: Add DSI-to-DPI mode support Marek Vasut
2022-01-17 3:02 ` Marek Vasut
2022-02-03 12:26 ` Maxime Ripard
2021-12-07 16:43 ` [PATCH 1/4] dt-bindings: display: bridge: tc358867: Document DPI output support Laurent Pinchart
2021-12-07 16:47 ` Marek Vasut
2021-12-07 17:03 ` Laurent Pinchart
2021-12-07 17:32 ` Marek Vasut
2022-02-03 12:23 ` Maxime Ripard
2022-02-17 20:57 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211127032405.283435-3-marex@denx.de \
--to=marex@denx.de \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=narmstrong@baylibre.com \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox