From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>
Cc: Dom Cobley <dom@raspberrypi.com>,
Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Werner Sembach <wse@tuxedocomputers.com>,
dri-devel@lists.freedesktop.org,
Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH v5 1/6] drm/vc4: hdmi: Move clock validation to its own function
Date: Thu, 27 Jan 2022 15:10:16 +0100 [thread overview]
Message-ID: <20220127141021.302482-2-maxime@cerno.tech> (raw)
In-Reply-To: <20220127141021.302482-1-maxime@cerno.tech>
Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index e3121eb5f605..105911644b02 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1261,6 +1261,19 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
mutex_unlock(&vc4_hdmi->mutex);
}
+static enum drm_mode_status
+vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi,
+ unsigned long long clock)
+{
+ if (clock > vc4_hdmi->variant->max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
+ if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
#define WIFI_2_4GHz_CH1_MIN_FREQ 2400000000ULL
#define WIFI_2_4GHz_CH1_MAX_FREQ 2422000000ULL
@@ -1304,10 +1317,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
pixel_rate = pixel_rate * 2;
- if (pixel_rate > vc4_hdmi->variant->max_pixel_clock)
- return -EINVAL;
-
- if (vc4_hdmi->disable_4kp60 && (pixel_rate > HDMI_14_MAX_TMDS_CLK))
+ if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, pixel_rate) != MODE_OK)
return -EINVAL;
vc4_state->pixel_rate = pixel_rate;
@@ -1326,13 +1336,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
(mode->hsync_end % 2) || (mode->htotal % 2)))
return MODE_H_ILLEGAL;
- if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock)
- return MODE_CLOCK_HIGH;
-
- if (vc4_hdmi->disable_4kp60 && vc4_hdmi_mode_needs_scrambling(mode))
- return MODE_CLOCK_HIGH;
-
- return MODE_OK;
+ return vc4_hdmi_encoder_clock_valid(vc4_hdmi, mode->clock * 1000);
}
static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
--
2.34.1
next prev parent reply other threads:[~2022-01-27 14:10 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 14:10 [PATCH v5 0/6] drm/vc4: hdmi: Yet Another Approach to HDMI YUV output Maxime Ripard
2022-01-27 14:10 ` Maxime Ripard [this message]
2022-01-27 14:10 ` [PATCH v5 2/6] drm/vc4: hdmi: Move clock calculation into its own function Maxime Ripard
2022-02-03 19:59 ` Ville Syrjälä
2022-02-10 9:00 ` Maxime Ripard
2022-01-27 14:10 ` [PATCH v5 3/6] drm/vc4: hdmi: Take the sink maximum TMDS clock into account Maxime Ripard
2022-01-27 14:10 ` [PATCH v5 4/6] drm/vc4: hdmi: Take bpp into account for the scrambler Maxime Ripard
2022-01-27 14:10 ` [PATCH v5 5/6] drm/vc4: hdmi: Always try to have the highest bpc Maxime Ripard
2022-01-27 14:10 ` [PATCH v5 6/6] drm/vc4: hdmi: Support HDMI YUV output Maxime Ripard
2022-02-03 20:07 ` Ville Syrjälä
2022-02-10 10:03 ` Maxime Ripard
2022-02-10 10:17 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220127141021.302482-2-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dom@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
--cc=tzimmermann@suse.de \
--cc=wse@tuxedocomputers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox