[PATCH V2 1/2] dt-bindings: Add byteswap order to chrontel ch7033

[Chris Morgan <macroalpha82@gmail.com>]

From: Chris Morgan <macromorgan@hotmail.com>

Update dt-binding documentation to add support for setting byteswap of
chrontel ch7033.

New property name of chrontel,byteswap added to set the byteswap order.
This property is optional.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
---
 .../bindings/display/bridge/chrontel,ch7033.yaml    | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index bb6289c7d375..984b90893583 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -14,6 +14,19 @@ properties:
   compatible:
     const: chrontel,ch7033
 
+  chrontel,byteswap:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum:
+      - 0  # BYTE_SWAP_RGB
+      - 1  # BYTE_SWAP_RBG
+      - 2  # BYTE_SWAP_GRB
+      - 3  # BYTE_SWAP_GBR
+      - 4  # BYTE_SWAP_BRG
+      - 5  # BYTE_SWAP_BGR
+    description: |
+      Set the byteswap value of the bridge. This is optional and if not
+      set value of BYTE_SWAP_BGR is used.
+
   reg:
     maxItems: 1
     description: I2C address of the device
-- 
2.25.1