From: Thomas Zimmermann <tzimmermann@suse.de>
To: airlied@redhat.com, sean@poorly.run, daniel@ffwll.ch
Cc: Thomas Zimmermann <tzimmermann@suse.de>, dri-devel@lists.freedesktop.org
Subject: [PATCH 00/16] drm/udl: Better modesetting, hot-unplug, protocol
Date: Mon, 19 Sep 2022 15:03:52 +0200 [thread overview]
Message-ID: <20220919130408.21486-1-tzimmermann@suse.de> (raw)
This patchset reworks the udl driver's modesetting code.
Patches #1 to #5 improve the connector code with various updates.
Patches #6 to #10 improve the modesetting code. Patch #7 replaces the
simple-KMS helpers with the regular atomic helpers. Patch #9 adds DRM
hot-unplugging. The driver had some unplugging support via USB functions,
the DRM side was probably not prepared yet. Patch #10 changes damage
updates to the damage iterator. This minimizes the amount of data to
send over USB.
Patches #11 to #16 add protocol constants for the various UDL display
operations.
Tested with X11, console and Weston.
Thomas Zimmermann (16):
drm/udl: Rename struct udl_drm_connector to struct udl_connector
drm/udl: Test pixel limit in mode-config's mode-valid function
drm/udl: Use USB timeout constant when reading EDID
drm/udl: Various improvements to the connector
drm/udl: Move connector to modesetting code
drm/udl: Remove udl_simple_display_pipe_mode_valid()
drm/udl: Convert to atomic-modesetting helpers
drm/udl: Simplify modesetting in CRTC's enable function
drm/udl: Support DRM hot-unplugging
drm/udl: Use damage iterator
drm/udl: Move register constants to udl_proto.h
drm/udl: Add constants for display-mode registers
drm/udl: Add register constants for color depth
drm/udl: Add register constants for video locks
drm/udl: Add register constants for framebuffer scanout addresses
drm/udl: Add constants for commands
drivers/gpu/drm/udl/Makefile | 2 +-
drivers/gpu/drm/udl/udl_connector.c | 139 -------
drivers/gpu/drm/udl/udl_connector.h | 15 -
drivers/gpu/drm/udl/udl_drv.h | 42 +--
drivers/gpu/drm/udl/udl_modeset.c | 567 ++++++++++++++++++----------
drivers/gpu/drm/udl/udl_proto.h | 62 +++
drivers/gpu/drm/udl/udl_transfer.c | 7 +-
7 files changed, 450 insertions(+), 384 deletions(-)
delete mode 100644 drivers/gpu/drm/udl/udl_connector.c
delete mode 100644 drivers/gpu/drm/udl/udl_connector.h
create mode 100644 drivers/gpu/drm/udl/udl_proto.h
base-commit: d8deedaa0fcd8192715a052a0239bee3f74a8fb1
--
2.37.3
next reply other threads:[~2022-09-19 13:05 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 13:03 Thomas Zimmermann [this message]
2022-09-19 13:03 ` [PATCH 01/16] drm/udl: Rename struct udl_drm_connector to struct udl_connector Thomas Zimmermann
2022-09-29 12:51 ` Javier Martinez Canillas
2022-09-19 13:03 ` [PATCH 02/16] drm/udl: Test pixel limit in mode-config's mode-valid function Thomas Zimmermann
2022-09-29 13:20 ` Javier Martinez Canillas
2022-09-29 13:53 ` Thomas Zimmermann
2022-09-19 13:03 ` [PATCH 03/16] drm/udl: Use USB timeout constant when reading EDID Thomas Zimmermann
2022-09-29 13:23 ` Javier Martinez Canillas
2022-09-19 13:03 ` [PATCH 04/16] drm/udl: Various improvements to the connector Thomas Zimmermann
2022-09-29 13:44 ` Javier Martinez Canillas
2022-09-19 13:03 ` [PATCH 05/16] drm/udl: Move connector to modesetting code Thomas Zimmermann
2022-09-29 13:47 ` Javier Martinez Canillas
2022-09-19 13:03 ` [PATCH 06/16] drm/udl: Remove udl_simple_display_pipe_mode_valid() Thomas Zimmermann
2022-09-29 13:49 ` Javier Martinez Canillas
2022-09-19 13:03 ` [PATCH 07/16] drm/udl: Convert to atomic-modesetting helpers Thomas Zimmermann
2022-09-29 14:21 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 08/16] drm/udl: Simplify modesetting in CRTC's enable function Thomas Zimmermann
2022-09-29 14:28 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 09/16] drm/udl: Support DRM hot-unplugging Thomas Zimmermann
2022-10-04 22:17 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 10/16] drm/udl: Use damage iterator Thomas Zimmermann
2022-10-04 22:28 ` Javier Martinez Canillas
2022-10-05 15:26 ` Thomas Zimmermann
2022-09-19 13:04 ` [PATCH 11/16] drm/udl: Move register constants to udl_proto.h Thomas Zimmermann
2022-10-04 22:39 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 12/16] drm/udl: Add constants for display-mode registers Thomas Zimmermann
2022-10-04 22:50 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 13/16] drm/udl: Add register constants for color depth Thomas Zimmermann
2022-10-04 22:51 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 14/16] drm/udl: Add register constants for video locks Thomas Zimmermann
2022-10-04 22:52 ` Javier Martinez Canillas
2022-09-19 13:04 ` [PATCH 15/16] drm/udl: Add register constants for framebuffer scanout addresses Thomas Zimmermann
2022-10-04 22:59 ` Javier Martinez Canillas
2022-10-05 14:56 ` Thomas Zimmermann
2022-09-19 13:04 ` [PATCH 16/16] drm/udl: Add constants for commands Thomas Zimmermann
2022-10-04 23:00 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220919130408.21486-1-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox