From: Oded Gabbay <ogabbay@kernel.org>
To: dri-devel@lists.freedesktop.org
Cc: Tomer Tayar <ttayar@habana.ai>
Subject: [PATCH 09/12] accel/habanalabs: use lower QM in QM errors handling
Date: Tue, 16 May 2023 12:30:27 +0300 [thread overview]
Message-ID: <20230516093030.1220526-9-ogabbay@kernel.org> (raw)
In-Reply-To: <20230516093030.1220526-1-ogabbay@kernel.org>
From: Tomer Tayar <ttayar@habana.ai>
The QMAN GLBL_ERR_STS_4 register has indications for errors also in the
lower CQ and the ARC CQ, and not just for errors in the lower CP.
Modify the relevant define/struct and the related print to use "lower
QM" instead of "lower CP".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/accel/habanalabs/gaudi2/gaudi2.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2.c b/drivers/accel/habanalabs/gaudi2/gaudi2.c
index a6aa17d86820..6e2561ead546 100644
--- a/drivers/accel/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/accel/habanalabs/gaudi2/gaudi2.c
@@ -57,7 +57,7 @@
#define GAUDI2_NA_EVENT_CAUSE 0xFF
#define GAUDI2_NUM_OF_QM_ERR_CAUSE 18
-#define GAUDI2_NUM_OF_QM_LCP_ERR_CAUSE 25
+#define GAUDI2_NUM_OF_LOWER_QM_ERR_CAUSE 25
#define GAUDI2_NUM_OF_QM_ARB_ERR_CAUSE 3
#define GAUDI2_NUM_OF_ARC_SEI_ERR_CAUSE 14
#define GAUDI2_NUM_OF_CPU_SEI_ERR_CAUSE 3
@@ -801,7 +801,7 @@ static const char * const gaudi2_qman_error_cause[GAUDI2_NUM_OF_QM_ERR_CAUSE] =
"PQC L2H error"
};
-static const char * const gaudi2_qman_lower_cp_error_cause[GAUDI2_NUM_OF_QM_LCP_ERR_CAUSE] = {
+static const char * const gaudi2_lower_qman_error_cause[GAUDI2_NUM_OF_LOWER_QM_ERR_CAUSE] = {
"RSVD0",
"CQ AXI HBW error",
"CP AXI HBW error",
@@ -7895,8 +7895,8 @@ static int gaudi2_handle_qman_err_generic(struct hl_device *hdev, u16 event_type
continue;
if (i == QMAN_STREAMS) {
- snprintf(reg_desc, ARRAY_SIZE(reg_desc), "LowerCP");
- num_error_causes = GAUDI2_NUM_OF_QM_LCP_ERR_CAUSE;
+ snprintf(reg_desc, ARRAY_SIZE(reg_desc), "LowerQM");
+ num_error_causes = GAUDI2_NUM_OF_LOWER_QM_ERR_CAUSE;
} else {
snprintf(reg_desc, ARRAY_SIZE(reg_desc), "stream%u", i);
num_error_causes = GAUDI2_NUM_OF_QM_ERR_CAUSE;
@@ -7907,7 +7907,7 @@ static int gaudi2_handle_qman_err_generic(struct hl_device *hdev, u16 event_type
gaudi2_print_event(hdev, event_type, true,
"%s. err cause: %s", reg_desc,
i == QMAN_STREAMS ?
- gaudi2_qman_lower_cp_error_cause[j] :
+ gaudi2_lower_qman_error_cause[j] :
gaudi2_qman_error_cause[j]);
error_count++;
}
--
2.40.1
next prev parent reply other threads:[~2023-05-16 9:30 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-16 9:30 [PATCH 01/12] accel/habanalabs: rename security functions related arguments Oded Gabbay
2023-05-16 9:30 ` [PATCH 02/12] accel/habanalabs: set unused bit as reserved Oded Gabbay
2023-05-17 18:03 ` Ofir Bitton
2023-05-16 9:30 ` [PATCH 03/12] accel/habanalabs: fix mem leak in capture user mappings Oded Gabbay
2023-05-16 9:30 ` [PATCH 04/12] accel/habanalabs: align to latest firmware specs Oded Gabbay
2023-05-17 18:03 ` Ofir Bitton
2023-05-16 9:30 ` [PATCH 05/12] accel/habanalabs: print max timeout value on CS stuck Oded Gabbay
2023-05-17 18:01 ` Ofir Bitton
2023-05-16 9:30 ` [PATCH 06/12] accel/habanalabs: upon DMA errors, use FW-extracted error cause Oded Gabbay
2023-05-16 9:30 ` [PATCH 07/12] accel/habanalabs: remove support for mmu disable Oded Gabbay
2023-05-16 9:30 ` [PATCH 08/12] accel/habanalabs: use binning info when handling razwi Oded Gabbay
2023-05-16 9:30 ` Oded Gabbay [this message]
2023-05-16 9:30 ` [PATCH 10/12] accel/habanalabs: print qman data on error only for lower qman Oded Gabbay
2023-05-16 9:30 ` [PATCH 11/12] accel/habanalabs: update state when loading boot fit Oded Gabbay
2023-05-16 9:30 ` [PATCH 12/12] accel/habanalabs: mask part of hmmu page fault captured address Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230516093030.1220526-9-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=ttayar@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox