Re: [PATCH V8 09/12] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX

[Luca Ceresoli <luca.ceresoli@bootlin.com>]

On Sat,  3 Feb 2024 10:52:49 -0600
Adam Ford <aford173@gmail.com> wrote:

> From: Lucas Stach <l.stach@pengutronix.de>
> 
> The HDMI TX controller on the i.MX8MP SoC is a Synopsys designware IP
> core with a little bit of SoC integration around it.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> Signed-off-by: Adam Ford <aford173@gmail.com>

[...]

> +examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/imx8mp-power.h>
> +
> +    hdmi@32fd8000 {
> +        compatible = "fsl,imx8mp-hdmi-tx";
> +        reg = <0x32fd8000 0x7eff>;
> +        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> +                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
> +                 <&clk IMX8MP_CLK_32K>,
> +                 <&hdmi_tx_phy>;
> +        clock-names = "iahb", "isfr", "cec", "pix";
> +        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
> +        reg-io-width = <1>;
> +        ports {
> +           #address-cells = <1>;
> +           #size-cells = <0>;
> +           port@0 {
> +             reg = <0>;
> +
> +             hdmi_tx_from_pvi: endpoint {
> +               remote-endpoint = <&pvi_to_hdmi_tx>;
> +             };
> +          };
> +
> +          port@1 {
> +            reg = <1>;
> +              hdmi_tx_out: endpoint {

Two excess indenting spaces on this line (port@0 is correct).
Also, I think there should an empty line between properties and nodes.

With these fixed:
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com