From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: [PATCH v2 13/21] drm/i915/dp: Add DP tunnel atomic state and check BW limit
Date: Tue, 20 Feb 2024 23:18:33 +0200 [thread overview]
Message-ID: <20240220211841.448846-14-imre.deak@intel.com> (raw)
In-Reply-To: <20240220211841.448846-1-imre.deak@intel.com>
Add the atomic state during a modeset required to enable the DP tunnel
BW allocation mode on links where such a tunnel was detected. This state
applies to an already enabled output, the state added for a newly
enabled output will be computed and added/cleared to/from the atomic
state in a follow-up patch.
v2:
- s/old_crtc_state/crtc_state in intel_crtc_duplicate_state().
- Move intel_dp_tunnel_atomic_cleanup_inherited_state() to a follow-up
patch adding the corresponding state. (Ville)
- Move intel_dp_tunnel_atomic_clear_stream_bw() to a follow-up
patch adding the corresponding state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_atomic.c | 6 ++++++
drivers/gpu/drm/i915/display/intel_display.c | 12 ++++++++++++
drivers/gpu/drm/i915/display/intel_link_bw.c | 5 +++++
3 files changed, 23 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c b/drivers/gpu/drm/i915/display/intel_atomic.c
index 96ab37e158995..798cb90361a83 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic.c
@@ -260,6 +260,10 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
if (crtc_state->post_csc_lut)
drm_property_blob_get(crtc_state->post_csc_lut);
+ if (crtc_state->dp_tunnel_ref.tunnel)
+ drm_dp_tunnel_ref_get(crtc_state->dp_tunnel_ref.tunnel,
+ &crtc_state->dp_tunnel_ref);
+
crtc_state->update_pipe = false;
crtc_state->update_m_n = false;
crtc_state->update_lrr = false;
@@ -311,6 +315,8 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
__drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi);
intel_crtc_free_hw_state(crtc_state);
+ if (crtc_state->dp_tunnel_ref.tunnel)
+ drm_dp_tunnel_ref_put(&crtc_state->dp_tunnel_ref);
kfree(crtc_state);
}
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index e1a4200f67a7e..16973ebb7865d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -33,6 +33,7 @@
#include <linux/string_helpers.h>
#include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_dp_tunnel.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_uapi.h>
@@ -73,6 +74,7 @@
#include "intel_dp.h"
#include "intel_dp_link_training.h"
#include "intel_dp_mst.h"
+#include "intel_dp_tunnel.h"
#include "intel_dpll.h"
#include "intel_dpll_mgr.h"
#include "intel_dpt.h"
@@ -4490,6 +4492,8 @@ copy_bigjoiner_crtc_state_modeset(struct intel_atomic_state *state,
saved_state->crc_enabled = slave_crtc_state->crc_enabled;
intel_crtc_free_hw_state(slave_crtc_state);
+ if (slave_crtc_state->dp_tunnel_ref.tunnel)
+ drm_dp_tunnel_ref_put(&slave_crtc_state->dp_tunnel_ref);
memcpy(slave_crtc_state, saved_state, sizeof(*slave_crtc_state));
kfree(saved_state);
@@ -4505,6 +4509,10 @@ copy_bigjoiner_crtc_state_modeset(struct intel_atomic_state *state,
&master_crtc_state->hw.adjusted_mode);
slave_crtc_state->hw.scaling_filter = master_crtc_state->hw.scaling_filter;
+ if (master_crtc_state->dp_tunnel_ref.tunnel)
+ drm_dp_tunnel_ref_get(master_crtc_state->dp_tunnel_ref.tunnel,
+ &slave_crtc_state->dp_tunnel_ref);
+
copy_bigjoiner_crtc_state_nomodeset(state, slave_crtc);
slave_crtc_state->uapi.mode_changed = master_crtc_state->uapi.mode_changed;
@@ -5365,6 +5373,10 @@ static int intel_modeset_pipe(struct intel_atomic_state *state,
if (ret)
return ret;
+ ret = intel_dp_tunnel_atomic_add_state_for_crtc(state, crtc);
+ if (ret)
+ return ret;
+
ret = intel_dp_mst_add_topology_state_for_crtc(state, crtc);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/i915/display/intel_link_bw.c b/drivers/gpu/drm/i915/display/intel_link_bw.c
index 27ea858897c9f..dfd7d5e23f3fa 100644
--- a/drivers/gpu/drm/i915/display/intel_link_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_link_bw.c
@@ -9,6 +9,7 @@
#include "intel_crtc.h"
#include "intel_display_types.h"
#include "intel_dp_mst.h"
+#include "intel_dp_tunnel.h"
#include "intel_fdi.h"
#include "intel_link_bw.h"
@@ -163,6 +164,10 @@ static int check_all_link_config(struct intel_atomic_state *state,
if (ret)
return ret;
+ ret = intel_dp_tunnel_atomic_check_link(state, limits);
+ if (ret)
+ return ret;
+
ret = intel_fdi_atomic_check_link(state, limits);
if (ret)
return ret;
--
2.39.2
next prev parent reply other threads:[~2024-02-20 21:18 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-20 21:18 [PATCH v2 00/21] drm/i915: Add Display Port tunnel BW allocation support Imre Deak
2024-02-20 21:18 ` [PATCH v2 01/21] drm/dp: Add drm_dp_max_dprx_data_rate() Imre Deak
2024-02-20 21:18 ` [PATCH v2 02/21] drm/dp: Add support for DP tunneling Imre Deak
2024-02-23 6:25 ` Shankar, Uma
2024-02-23 14:33 ` Imre Deak
2024-02-23 21:32 ` Ville Syrjälä
2024-02-26 11:40 ` Imre Deak
2024-02-20 21:18 ` [PATCH v2 03/21] drm/i915: Fix display bpp limit computation during system resume Imre Deak
2024-02-23 6:38 ` Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 04/21] drm/i915/dp: Add support to notify MST connectors to retry modesets Imre Deak
2024-02-23 7:59 ` Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 05/21] drm/i915/dp: Use drm_dp_max_dprx_data_rate() Imre Deak
2024-02-20 21:18 ` [PATCH v2 06/21] drm/i915/dp: Factor out intel_dp_config_required_rate() Imre Deak
2024-02-20 21:18 ` [PATCH v2 07/21] drm/i915/dp: Export intel_dp_max_common_rate/lane_count() Imre Deak
2024-02-20 21:18 ` [PATCH v2 08/21] drm/i915/dp: Factor out intel_dp_update_sink_caps() Imre Deak
2024-02-20 21:18 ` [PATCH v2 09/21] drm/i915/dp: Factor out intel_dp_read_dprx_caps() Imre Deak
2024-02-20 21:18 ` [PATCH v2 10/21] drm/i915/dp: Add intel_dp_max_link_data_rate() Imre Deak
2024-02-20 21:18 ` [PATCH v2 11/21] drm/i915/dp: Add way to get active pipes with syncing commits Imre Deak
2024-02-23 8:10 ` Shankar, Uma
2024-02-23 21:11 ` Ville Syrjälä
2024-02-23 22:09 ` Imre Deak
2024-02-23 22:13 ` Ville Syrjälä
2024-02-20 21:18 ` [PATCH v2 12/21] drm/i915/dp: Add support for DP tunnel BW allocation Imre Deak
2024-02-23 21:37 ` Ville Syrjälä
2024-02-26 11:42 ` Imre Deak
2024-02-26 10:47 ` Shankar, Uma
2024-02-20 21:18 ` Imre Deak [this message]
2024-02-23 10:13 ` [PATCH v2 13/21] drm/i915/dp: Add DP tunnel atomic state and check BW limit Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 14/21] drm/i915/dp: Account for tunnel BW limit in intel_dp_max_link_data_rate() Imre Deak
2024-02-20 21:18 ` [PATCH v2 15/21] drm/i915/dp: Compute DP tunnel BW during encoder state computation Imre Deak
2024-02-20 21:18 ` [PATCH v2 16/21] drm/i915/dp: Allocate/free DP tunnel BW in the encoder enable/disable hooks Imre Deak
2024-02-23 21:25 ` Ville Syrjälä
2024-02-20 21:18 ` [PATCH v2 17/21] drm/i915/dp: Handle DP tunnel IRQs Imre Deak
2024-02-23 10:19 ` Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 18/21] drm/i915/dp: Call intel_dp_sync_state() always for DDI DP encoders Imre Deak
2024-02-20 21:18 ` [PATCH v2 19/21] drm/i915/dp: Suspend/resume DP tunnels Imre Deak
2024-02-23 10:23 ` Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 20/21] drm/i915/dp: Read DPRX for all long HPD pulses Imre Deak
2024-02-23 10:33 ` Shankar, Uma
2024-02-20 21:18 ` [PATCH v2 21/21] drm/i915/dp: Enable DP tunnel BW allocation mode Imre Deak
2024-02-23 10:36 ` Shankar, Uma
2024-02-23 22:14 ` [PATCH v2 00/21] drm/i915: Add Display Port tunnel BW allocation support Ville Syrjälä
2024-02-26 13:54 ` Jani Nikula
2024-02-26 13:59 ` Maxime Ripard
[not found] ` <170904368955.337360.17984430833255893803@8e613ede5ea5>
2024-02-27 15:51 ` ✗ Fi.CI.IGT: failure for drm/i915: Add Display Port tunnel BW allocation support (rev6) Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240220211841.448846-14-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).