[PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector

[Marek Vasut <marex@denx.de>]

The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.

Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.

Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf

Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/panel/panel-simple.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index d9ddef0e675a7..d4c30a86d15d6 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2618,6 +2618,9 @@ static const struct panel_desc innolux_g121x1_l03 = {
 		.unprepare = 200,
 		.disable = 400,
 	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
 static const struct display_timing innolux_g156hce_l01_timings = {
-- 
2.43.0