From: Chris Morgan <macroalpha82@gmail.com>
To: linux-sunxi@lists.linux.dev
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
ryan@testtoast.com, macromorgan@hotmail.com,
p.zabel@pengutronix.de, tzimmermann@suse.de,
maarten.lankhorst@linux.intel.com, simona@ffwll.ch,
airlied@gmail.com, mripard@kernel.org, samuel@sholland.org,
jernej.skrabec@gmail.com, wens@csie.org, conor+dt@kernel.org,
krzk+dt@kernel.org, robh@kernel.org
Subject: [PATCH V9 00/24] drm: sun4i: add Display Engine 3.3 (DE33) support
Date: Wed, 7 May 2025 15:19:19 -0500 [thread overview]
Message-ID: <20250507201943.330111-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
I've spoken with Ryan and he agreed to let me take over this series to
get the display engine working on the Allwinner H616. I've taken his
previous patch series for Display Engine 3.3 and combined it with the
LCD controller patch series. I've also fixed a few additional bugs and
made some changes to the device tree bindings.
Changes since V8:
- Combined the DE33 [1] series and the LCD [2] series to better track
all patches necessary to output to an LCD display for the Allwinner
H700.
- Added a required LVDS reset as requested here [3].
- Added compatible strings with a fallback for
allwinner,sun50i-h616-display-engine, allwinner,sun50i-h616-tcon-top,
and allwinner,sun50i-h616-sram-c.
- Added binding documentation for the LCD controller.
- Renamed the de3_sram device tree node to de33_sram.
- Corrected the LVDS reset for the LCD controller binding.
- Removed the PWM pins from the pincontroller bindings, as PWM is not
yet supported.
- Reordered the patches so that a binding or a device tree node is not
referenced before it is defined.
[1] https://lore.kernel.org/linux-sunxi/20250310092345.31708-1-ryan@testtoast.com/
[2] https://lore.kernel.org/linux-sunxi/20250216092827.15444-1-ryan@testtoast.com/
[3] https://lore.kernel.org/linux-sunxi/38669808.XM6RcZxFsP@jernej-laptop/
Chris Morgan (24):
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
drm: sun4i: de2/de3: add mixer version enum
drm: sun4i: de2/de3: refactor mixer initialisation
drm: sun4i: de2/de3: add generic blender register reference function
drm: sun4i: de2/de3: use generic register reference function for layer
configuration
dt-bindings: allwinner: add H616 DE33 bus binding
dt-bindings: allwinner: add H616 DE33 clock binding
dt-bindings: allwinner: add H616 DE33 mixer binding
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
drm: sun4i: de33: vi_scaler: add Display Engine 3.3 (DE33) support
drm: sun4i: de33: mixer: add Display Engine 3.3 (DE33) support
drm: sun4i: de33: mixer: add mixer configuration for the H616
dt-bindings: allwinner: Add TCON_TOP and TCON_LCD clock/reset defines
dt-bindings: display: sun4i: Add compatible strings for H616 DE
dt-bindings: display: sun4i: Add compatible strings for H616 TCON TOP
dt-bindings: sram: sunxi-sram: Add H616 SRAM C compatible
dt-bindings: display: Add R40 and H616 display engine compatibles
drm/sun4i: tcon: Add support for R40 LCD
arm64: dts: allwinner: h616: add display engine, bus and mixer nodes
arm64: dts: allwinner: h616: Add TCON nodes to H616 DTSI
arm64: dts: allwinner: h616: add LCD and LVDS pins
arm64: dts: allwinner: rg35xx: Add GPIO backlight control
arm64: dts: allwinner: rg35xx: Enable LCD output
.../bus/allwinner,sun50i-a64-de2.yaml | 7 +-
.../clock/allwinner,sun8i-a83t-de2-clk.yaml | 1 +
.../allwinner,sun4i-a10-display-engine.yaml | 39 +--
.../display/allwinner,sun4i-a10-tcon.yaml | 10 +
.../allwinner,sun8i-a83t-de2-mixer.yaml | 34 ++-
.../display/allwinner,sun8i-r40-tcon-top.yaml | 13 +-
.../allwinner,sun4i-a10-system-control.yaml | 4 +-
.../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 224 ++++++++++++++++++
.../sun50i-h700-anbernic-rg35xx-2024.dts | 64 +++++
drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 25 ++
drivers/gpu/drm/sun4i/sun4i_tcon.c | 9 +
drivers/gpu/drm/sun4i/sun8i_csc.c | 4 +-
drivers/gpu/drm/sun4i/sun8i_mixer.c | 168 ++++++++++---
drivers/gpu/drm/sun4i/sun8i_mixer.h | 30 ++-
drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 27 ++-
drivers/gpu/drm/sun4i/sun8i_ui_scaler.c | 2 +-
drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 14 +-
drivers/gpu/drm/sun4i/sun8i_vi_scaler.c | 6 +-
include/dt-bindings/clock/sun8i-tcon-top.h | 2 +
include/dt-bindings/reset/sun50i-h616-ccu.h | 1 +
21 files changed, 597 insertions(+), 88 deletions(-)
--
2.43.0
next reply other threads:[~2025-05-07 20:22 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-07 20:19 Chris Morgan [this message]
2025-05-07 20:19 ` [PATCH V9 01/24] dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset Chris Morgan
2025-05-09 14:12 ` Andre Przywara
2025-05-07 20:19 ` [PATCH V9 02/24] clk: sunxi-ng: h616: Add LVDS reset for LCD TCON Chris Morgan
2025-05-09 14:14 ` Andre Przywara
2025-05-09 14:29 ` Chen-Yu Tsai
2025-05-09 16:31 ` Andre Przywara
2025-05-09 20:05 ` Chris Morgan
2025-05-07 20:19 ` [PATCH V9 03/24] drm: sun4i: de2/de3: add mixer version enum Chris Morgan
2025-05-07 20:19 ` [PATCH V9 04/24] drm: sun4i: de2/de3: refactor mixer initialisation Chris Morgan
2025-05-07 20:19 ` [PATCH V9 05/24] drm: sun4i: de2/de3: add generic blender register reference function Chris Morgan
2025-05-07 20:19 ` [PATCH V9 06/24] drm: sun4i: de2/de3: use generic register reference function for layer configuration Chris Morgan
2025-05-07 20:19 ` [PATCH V9 07/24] dt-bindings: allwinner: add H616 DE33 bus binding Chris Morgan
2025-05-07 20:19 ` [PATCH V9 08/24] dt-bindings: allwinner: add H616 DE33 clock binding Chris Morgan
2025-05-07 20:19 ` [PATCH V9 09/24] dt-bindings: allwinner: add H616 DE33 mixer binding Chris Morgan
2025-05-07 20:19 ` [PATCH V9 10/24] clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support Chris Morgan
2025-05-07 20:19 ` [PATCH V9 11/24] drm: sun4i: de33: vi_scaler: " Chris Morgan
2025-05-07 20:19 ` [PATCH V9 12/24] drm: sun4i: de33: mixer: " Chris Morgan
2025-05-07 20:19 ` [PATCH V9 13/24] drm: sun4i: de33: mixer: add mixer configuration for the H616 Chris Morgan
2025-05-07 20:19 ` [PATCH V9 14/24] dt-bindings: allwinner: Add TCON_TOP and TCON_LCD clock/reset defines Chris Morgan
2025-05-07 20:19 ` [PATCH V9 15/24] dt-bindings: display: sun4i: Add compatible strings for H616 DE Chris Morgan
2025-05-07 20:19 ` [PATCH V9 16/24] dt-bindings: display: sun4i: Add compatible strings for H616 TCON TOP Chris Morgan
2025-05-07 20:19 ` [PATCH V9 17/24] dt-bindings: sram: sunxi-sram: Add H616 SRAM C compatible Chris Morgan
2025-05-07 20:19 ` [PATCH V9 18/24] dt-bindings: display: Add R40 and H616 display engine compatibles Chris Morgan
2025-05-07 20:19 ` [PATCH V9 19/24] drm/sun4i: tcon: Add support for R40 LCD Chris Morgan
2025-05-07 20:19 ` [PATCH V9 20/24] arm64: dts: allwinner: h616: add display engine, bus and mixer nodes Chris Morgan
2025-05-07 20:19 ` [PATCH V9 21/24] arm64: dts: allwinner: h616: Add TCON nodes to H616 DTSI Chris Morgan
2025-05-07 20:19 ` [PATCH V9 22/24] arm64: dts: allwinner: h616: add LCD and LVDS pins Chris Morgan
2025-05-07 20:19 ` [PATCH V9 23/24] arm64: dts: allwinner: rg35xx: Add GPIO backlight control Chris Morgan
2025-05-09 14:32 ` Andre Przywara
2025-05-09 20:02 ` Chris Morgan
2025-05-07 20:19 ` [PATCH V9 24/24] arm64: dts: allwinner: rg35xx: Enable LCD output Chris Morgan
2025-05-07 21:13 ` [PATCH V9 00/24] drm: sun4i: add Display Engine 3.3 (DE33) support Rob Herring
2025-05-08 18:34 ` Corentin Labbe
2025-05-08 7:26 ` Krzysztof Kozlowski
2025-05-09 13:08 ` Chris Morgan
2025-05-10 2:01 ` (subset) " Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250507201943.330111-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=maarten.lankhorst@linux.intel.com \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=ryan@testtoast.com \
--cc=samuel@sholland.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).