[PATCH v4 03/17] drm/tidss: Use the crtc_* timings when programming the HW

[Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>]

Use the crtc_* fields from drm_display_mode, instead of the "logical"
fields. This shouldn't change anything in practice, but afaiu the crtc_*
fields are the correct ones to use here.

Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/gpu/drm/tidss/tidss_crtc.c  |  2 +-
 drivers/gpu/drm/tidss/tidss_dispc.c | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/tidss/tidss_crtc.c b/drivers/gpu/drm/tidss/tidss_crtc.c
index a2f40a5c7703..17efd77ce7f2 100644
--- a/drivers/gpu/drm/tidss/tidss_crtc.c
+++ b/drivers/gpu/drm/tidss/tidss_crtc.c
@@ -225,7 +225,7 @@ static void tidss_crtc_atomic_enable(struct drm_crtc *crtc,
 	tidss_runtime_get(tidss);
 
 	r = dispc_vp_set_clk_rate(tidss->dispc, tcrtc->hw_videoport,
-				  mode->clock * 1000);
+				  mode->crtc_clock * 1000);
 	if (r != 0)
 		return;
 
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index 21363ccbd763..857edd6170f8 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -1194,13 +1194,13 @@ void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport,
 
 	dispc_set_num_datalines(dispc, hw_videoport, fmt->data_width);
 
-	hfp = mode->hsync_start - mode->hdisplay;
-	hsw = mode->hsync_end - mode->hsync_start;
-	hbp = mode->htotal - mode->hsync_end;
+	hfp = mode->crtc_hsync_start - mode->crtc_hdisplay;
+	hsw = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	hbp = mode->crtc_htotal - mode->crtc_hsync_end;
 
-	vfp = mode->vsync_start - mode->vdisplay;
-	vsw = mode->vsync_end - mode->vsync_start;
-	vbp = mode->vtotal - mode->vsync_end;
+	vfp = mode->crtc_vsync_start - mode->crtc_vdisplay;
+	vsw = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	vbp = mode->crtc_vtotal - mode->crtc_vsync_end;
 
 	dispc_vp_write(dispc, hw_videoport, DISPC_VP_TIMING_H,
 		       FLD_VAL(hsw - 1, 7, 0) |
@@ -1242,8 +1242,8 @@ void dispc_vp_enable(struct dispc_device *dispc, u32 hw_videoport,
 		       FLD_VAL(ivs, 12, 12));
 
 	dispc_vp_write(dispc, hw_videoport, DISPC_VP_SIZE_SCREEN,
-		       FLD_VAL(mode->hdisplay - 1, 11, 0) |
-		       FLD_VAL(mode->vdisplay - 1, 27, 16));
+		       FLD_VAL(mode->crtc_hdisplay - 1, 11, 0) |
+		       FLD_VAL(mode->crtc_vdisplay - 1, 27, 16));
 
 	VP_REG_FLD_MOD(dispc, hw_videoport, DISPC_VP_CONTROL, 1, 0, 0);
 }

-- 
2.43.0