dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Jun Nie <jun.nie@linaro.org>
To: Rob Clark <robdclark@gmail.com>,
	 Abhinav Kumar <quic_abhinavk@quicinc.com>,
	 Dmitry Baryshkov <lumag@kernel.org>, Sean Paul <sean@poorly.run>,
	 Marijn Suijten <marijn.suijten@somainline.org>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,
	 Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	 freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	 Jun Nie <jun.nie@linaro.org>,
	Dmitry Baryshkov <lumag@kernel.org>
Subject: [PATCH v12 11/12] drm/msm/dpu: support plane splitting in quad-pipe case
Date: Mon, 07 Jul 2025 14:18:06 +0800	[thread overview]
Message-ID: <20250707-v6-16-rc2-quad-pipe-upstream-v12-11-67e3721e7d83@linaro.org> (raw)
In-Reply-To: <20250707-v6-16-rc2-quad-pipe-upstream-v12-0-67e3721e7d83@linaro.org>

The content of every half of screen is sent out via one interface in
dual-DSI case. The content for every interface is blended by a LM
pair in quad-pipe case, thus a LM pair should not blend any content
that cross the half of screen in this case. Clip plane into pipes per
left and right half screen ROI if topology is quad pipe case.

The clipped rectangle on every half of screen is futher handled by two
pipes if its width exceeds a limit for a single pipe.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  11 +++
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h  |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 137 +++++++++++++++++++++---------
 3 files changed, 110 insertions(+), 40 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index c7dc5b47ae18ebd78de30d2a0605caa7dd547850..1c7a5e545745320018c3e9a2d163cbfd3dceaf7b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1592,6 +1592,17 @@ int dpu_crtc_vblank(struct drm_crtc *crtc, bool en)
 	return 0;
 }
 
+/**
+ * dpu_crtc_get_num_lm - Get mixer number in this CRTC pipeline
+ * @state: Pointer to drm crtc state object
+ */
+unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state)
+{
+	struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
+
+	return cstate->num_mixers;
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
 {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
index 94392b9b924546f96e738ae20920cf9afd568e6b..6eaba5696e8e6bd1246a9895c4c8714ca6589b10 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
@@ -267,4 +267,6 @@ static inline enum dpu_crtc_client_type dpu_crtc_get_client_type(
 
 void dpu_crtc_frame_event_cb(struct drm_crtc *crtc, u32 event);
 
+unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state);
+
 #endif /* _DPU_CRTC_H_ */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index ecfebf7a2406d65930075cc2a4b8a8a7d40b3d3c..866e2dfcc8dfd1e9f1c5433fd738eedde7539418 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -824,8 +824,12 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
 	struct dpu_sw_pipe_cfg *pipe_cfg;
 	struct dpu_sw_pipe_cfg *r_pipe_cfg;
+	struct dpu_sw_pipe_cfg init_pipe_cfg;
 	struct drm_rect fb_rect = { 0 };
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	uint32_t max_linewidth;
+	u32 num_lm;
+	int stage_id, num_stages;
 
 	min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
 	max_scale = MAX_DOWNSCALE_RATIO << 16;
@@ -848,13 +852,10 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 		return -EINVAL;
 	}
 
-	/* move the assignment here, to ease handling to another pairs later */
-	pipe_cfg = &pstate->pipe_cfg[0];
-	r_pipe_cfg = &pstate->pipe_cfg[1];
-	/* state->src is 16.16, src_rect is not */
-	drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+	num_lm = dpu_crtc_get_num_lm(crtc_state);
 
-	pipe_cfg->dst_rect = new_plane_state->dst;
+	/* state->src is 16.16, src_rect is not */
+	drm_rect_fp_to_int(&init_pipe_cfg.src_rect, &new_plane_state->src);
 
 	fb_rect.x2 = new_plane_state->fb->width;
 	fb_rect.y2 = new_plane_state->fb->height;
@@ -879,35 +880,94 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 
 	max_linewidth = pdpu->catalog->caps->max_linewidth;
 
-	drm_rect_rotate(&pipe_cfg->src_rect,
+	drm_rect_rotate(&init_pipe_cfg.src_rect,
 			new_plane_state->fb->width, new_plane_state->fb->height,
 			new_plane_state->rotation);
 
-	if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
-	     _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
-		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
+	/*
+	 * We have 1 mixer pair cfg for 1:1:1 and 2:2:1 topology, 2 mixer pair
+	 * configs for left and right half screen in case of 4:4:2 topology.
+	 * But we may have 2 rect to split wide plane that exceeds limit with 1
+	 * config for 2:2:1. So need to handle both wide plane splitting, and
+	 * two halves of screen splitting for quad-pipe case. Check dest
+	 * rectangle left/right clipping first, then check wide rectangle
+	 * splitting in every half next.
+	 */
+	num_stages = (num_lm + 1) / 2;
+	/* iterate mixer configs for this plane, to separate left/right with the id */
+	for (stage_id = 0; stage_id < num_stages; stage_id++) {
+		struct drm_rect mixer_rect = {
+			.x1 = stage_id * mode->hdisplay / num_stages,
+			.y1 = 0,
+			.x2 = (stage_id + 1) * mode->hdisplay / num_stages,
+			.y2 = mode->vdisplay
+			};
+		int cfg_idx = stage_id * PIPES_PER_STAGE;
+
+		pipe_cfg = &pstate->pipe_cfg[cfg_idx];
+		r_pipe_cfg = &pstate->pipe_cfg[cfg_idx + 1];
+
+		drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+		pipe_cfg->dst_rect = new_plane_state->dst;
+
+		DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT
+				" vs clip window " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect),
+				DRM_RECT_ARG(&mixer_rect));
+
+		/*
+		 * If this plane does not fall into mixer rect, check next
+		 * mixer rect.
+		 */
+		if (!drm_rect_clip_scaled(&pipe_cfg->src_rect,
+					  &pipe_cfg->dst_rect,
+					  &mixer_rect)) {
+			memset(pipe_cfg, 0, 2 * sizeof(struct dpu_sw_pipe_cfg));
+
+			continue;
 		}
 
-		*r_pipe_cfg = *pipe_cfg;
-		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
-		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
-		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
-		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
-	} else {
-		memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
-	}
+		pipe_cfg->dst_rect.x1 -= mixer_rect.x1;
+		pipe_cfg->dst_rect.x2 -= mixer_rect.x1;
+
+		DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect), DRM_RECT_ARG(&pipe_cfg->dst_rect));
 
-	drm_rect_rotate_inv(&pipe_cfg->src_rect,
-			    new_plane_state->fb->width, new_plane_state->fb->height,
-			    new_plane_state->rotation);
-	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
-		drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
-				    new_plane_state->fb->width, new_plane_state->fb->height,
+		/* Split wide rect into 2 rect */
+		if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
+		     _dpu_plane_calc_clk(mode, pipe_cfg) > max_mdp_clk_rate) {
+
+			if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+				DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+						DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+				return -E2BIG;
+			}
+
+			memcpy(r_pipe_cfg, pipe_cfg, sizeof(struct dpu_sw_pipe_cfg));
+			pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+			pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+			r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+			r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+			DPU_DEBUG_PLANE(pdpu, "Split wide plane into:"
+					DRM_RECT_FMT " and " DRM_RECT_FMT "\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect),
+					DRM_RECT_ARG(&r_pipe_cfg->src_rect));
+		} else {
+			memset(r_pipe_cfg, 0, sizeof(struct dpu_sw_pipe_cfg));
+		}
+
+		drm_rect_rotate_inv(&pipe_cfg->src_rect,
+				    new_plane_state->fb->width,
+				    new_plane_state->fb->height,
 				    new_plane_state->rotation);
 
+		if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
+			drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+					    new_plane_state->fb->width,
+					    new_plane_state->fb->height,
+					    new_plane_state->rotation);
+	}
+
 	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
 
 	return 0;
@@ -987,20 +1047,17 @@ static int dpu_plane_atomic_check_sspp(struct drm_plane *plane,
 		drm_atomic_get_new_plane_state(state, plane);
 	struct dpu_plane *pdpu = to_dpu_plane(plane);
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
-	struct dpu_sw_pipe *pipe = &pstate->pipe[0];
-	struct dpu_sw_pipe *r_pipe = &pstate->pipe[1];
-	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg[0];
-	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->pipe_cfg[1];
-	int ret = 0;
-
-	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg,
-					  &crtc_state->adjusted_mode,
-					  new_plane_state);
-	if (ret)
-		return ret;
+	struct dpu_sw_pipe *pipe;
+	struct dpu_sw_pipe_cfg *pipe_cfg;
+	int ret = 0, i;
 
-	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
-		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg,
+	for (i = 0; i < PIPES_PER_PLANE; i++) {
+		pipe = &pstate->pipe[i];
+		pipe_cfg = &pstate->pipe_cfg[i];
+		if (!pipe->sspp)
+			continue;
+		DPU_DEBUG_PLANE(pdpu, "pipe %d is in use, validate it\n", i);
+		ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg,
 						  &crtc_state->adjusted_mode,
 						  new_plane_state);
 		if (ret)

-- 
2.34.1


  parent reply	other threads:[~2025-07-07  6:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-07  6:17 [PATCH v12 00/12] drm/msm/dpu: Support quad pipe with dual-interface Jun Nie
2025-07-07  6:17 ` [PATCH v12 01/12] drm/msm/dpu: polish log for resource allocation Jun Nie
2025-07-07  6:17 ` [PATCH v12 02/12] drm/msm/dpu: decide right side per last bit Jun Nie
2025-07-07  6:17 ` [PATCH v12 03/12] drm/msm/dpu: fix mixer number counter on allocation Jun Nie
2025-07-07  6:17 ` [PATCH v12 04/12] drm/msm/dpu: bind correct pingpong for quad pipe Jun Nie
2025-07-07  6:18 ` [PATCH v12 05/12] drm/msm/dpu: Add pipe as trace argument Jun Nie
2025-07-07  6:18 ` [PATCH v12 06/12] drm/msm/dpu: handle pipes as array Jun Nie
2025-07-07  6:18 ` [PATCH v12 07/12] drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer Jun Nie
2025-07-07  6:18 ` [PATCH v12 08/12] drm/msm/dpu: Use dedicated WB number definition Jun Nie
2025-07-07  6:18 ` [PATCH v12 09/12] drm/msm/dpu: blend pipes per mixer pairs config Jun Nie
2025-07-07  6:18 ` [PATCH v12 10/12] drm/msm/dpu: support SSPP assignment for quad-pipe case Jun Nie
2025-07-19 10:09   ` Dmitry Baryshkov
2025-07-21  8:06     ` Jun Nie
2025-07-22 12:04       ` Dmitry Baryshkov
2025-07-24  1:56         ` Jun Nie
2025-07-25 13:45           ` Dmitry Baryshkov
2025-07-07  6:18 ` Jun Nie [this message]
2025-07-07  6:18 ` [PATCH v12 12/12] drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case Jun Nie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250707-v6-16-rc2-quad-pipe-upstream-v12-11-67e3721e7d83@linaro.org \
    --to=jun.nie@linaro.org \
    --cc=airlied@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lumag@kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=quic_abhinavk@quicinc.com \
    --cc=quic_jesszhan@quicinc.com \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    --cc=simona@ffwll.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).