dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Heidelberg <david@ixit.cz>,
	Svyatoslav Ryhel <clamor95@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/2 RESEND] dt-bindings: display: bridge: Document Solomon SSD2825
Date: Wed, 30 Jul 2025 08:54:23 +0300	[thread overview]
Message-ID: <20250730055424.6718-2-clamor95@gmail.com> (raw)
In-Reply-To: <20250730055424.6718-1-clamor95@gmail.com>

Add bindings for Solomon SSD2825 MIPI master bridge chip that connects an
application processor with traditional parallel LCD interface and an LCD
driver with MIPI slave interface. The SSD2825 supports both parallel RGB
interface and serial SPI interface.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../display/bridge/solomon,ssd2825.yaml       | 141 ++++++++++++++++++
 1 file changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml b/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml
new file mode 100644
index 000000000000..e2d293d623b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/solomon,ssd2825.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD2825 RGB to MIPI-DSI bridge
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: solomon,ssd2825
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  dvdd-supply:
+    description: Regulator for 1.2V digital power supply.
+
+  avdd-supply:
+    description: Regulator for 1.2V analog power supply.
+
+  vddio-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpha: true
+  spi-cpol: true
+
+  clocks:
+    maxItems: 1
+    description: Reference TX_CLK used before PLL is locked.
+
+  solomon,hs-zero-delay-ns:
+    description:
+      HS zero delay period
+    minimum: 0
+    maximum: 1700
+    default: 133
+
+  solomon,hs-prep-delay-ns:
+    description:
+      HS prep delay period
+    minimum: 0
+    maximum: 1728
+    default: 40
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for RGB input
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [ 16, 18, 24 ]
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for DSI output (panel or connector)
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dsi@2 {
+            compatible = "solomon,ssd2825";
+            reg = <2>;
+
+            spi-max-frequency = <1000000>;
+
+            spi-cpha;
+            spi-cpol;
+
+            reset-gpios = <&gpio 114 GPIO_ACTIVE_LOW>;
+
+            dvdd-supply = <&vdd_1v2>;
+            avdd-supply = <&vdd_1v2>;
+            vddio-supply = <&vdd_1v8_io>;
+
+            solomon,hs-zero-delay-ns = <300>;
+            solomon,hs-prep-delay-ns = <65>;
+
+            clocks = <&ssd2825_tx_clk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_input: endpoint {
+                        remote-endpoint = <&dpi_output>;
+                        bus-width = <24>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_output: endpoint {
+                        remote-endpoint = <&panel_input>;
+                    };
+                };
+            };
+        };
+    };
-- 
2.48.1


  reply	other threads:[~2025-07-30  5:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-30  5:54 [PATCH v7 0/2 RESEND] drm: bridge: add ssd2825 RGB/DSI bridge support Svyatoslav Ryhel
2025-07-30  5:54 ` Svyatoslav Ryhel [this message]
2025-07-30  5:54 ` [PATCH v7 2/2 RESEND] drm: bridge: Add support for Solomon SSD2825 RGB/DSI bridge Svyatoslav Ryhel
2025-07-30 14:21   ` Neil Armstrong
2025-07-30 21:18   ` Dmitry Baryshkov
2025-07-30 21:22 ` [PATCH v7 0/2 RESEND] drm: bridge: add ssd2825 RGB/DSI bridge support Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250730055424.6718-2-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=david@ixit.cz \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).