[PATCH v1 11/19] staging: media: tegra-video: tegra20: add support for second output of VI

[Svyatoslav Ryhel <clamor95@gmail.com>]

VI in Tegra20/Tegra30 has 2 VI outputs with different set of supported
formats. Convert output registers to macros for simpler work with both
outputs since apart formats their layout matches.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/staging/media/tegra-video/tegra20.c | 80 ++++++++++++---------
 1 file changed, 45 insertions(+), 35 deletions(-)

diff --git a/drivers/staging/media/tegra-video/tegra20.c b/drivers/staging/media/tegra-video/tegra20.c
index 3e2d746638b6..54512d1ecf83 100644
--- a/drivers/staging/media/tegra-video/tegra20.c
+++ b/drivers/staging/media/tegra-video/tegra20.c
@@ -28,13 +28,19 @@
 #define TEGRA20_MIN_HEIGHT	32U
 #define TEGRA20_MAX_HEIGHT	8190U
 
+/* Tegra20/Tegra30 has 2 outputs in VI */
+enum {
+	OUT_1,
+	OUT_2,
+};
+
 /* --------------------------------------------------------------------------
  * Registers
  */
 
-#define TEGRA_VI_CONT_SYNCPT_OUT_1			0x0060
-#define       VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT	BIT(8)
-#define       VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT	0
+#define TEGRA_VI_CONT_SYNCPT_OUT(n)			(0x0060 + (n) * 4)
+#define       VI_CONT_SYNCPT_OUT_CONTINUOUS_SYNCPT	BIT(8)
+#define       VI_CONT_SYNCPT_OUT_SYNCPT_IDX_SFT		0
 
 #define TEGRA_VI_VI_INPUT_CONTROL			0x0088
 #define       VI_INPUT_FIELD_DETECT			BIT(27)
@@ -46,6 +52,7 @@
 #define       VI_INPUT_YUV_INPUT_FORMAT_YVYU		(3 << VI_INPUT_YUV_INPUT_FORMAT_SFT)
 #define       VI_INPUT_INPUT_FORMAT_SFT			2  /* bits [5:2] */
 #define       VI_INPUT_INPUT_FORMAT_YUV422		(0 << VI_INPUT_INPUT_FORMAT_SFT)
+#define       VI_INPUT_INPUT_FORMAT_BAYER		(2 << VI_INPUT_INPUT_FORMAT_SFT)
 #define       VI_INPUT_VIP_INPUT_ENABLE			BIT(1)
 
 #define TEGRA_VI_VI_CORE_CONTROL			0x008c
@@ -66,7 +73,7 @@
 #define       VI_VI_CORE_CONTROL_OUTPUT_TO_EPP_SFT	2
 #define       VI_VI_CORE_CONTROL_OUTPUT_TO_ISP_SFT	0
 
-#define TEGRA_VI_VI_FIRST_OUTPUT_CONTROL		0x0090
+#define TEGRA_VI_VI_OUTPUT_CONTROL(n)			(0x0090 + (n) * 4)
 #define       VI_OUTPUT_FORMAT_EXT			BIT(22)
 #define       VI_OUTPUT_V_DIRECTION			BIT(20)
 #define       VI_OUTPUT_H_DIRECTION			BIT(19)
@@ -80,6 +87,7 @@
 #define       VI_OUTPUT_OUTPUT_FORMAT_SFT		0
 #define       VI_OUTPUT_OUTPUT_FORMAT_YUV422POST	(3 << VI_OUTPUT_OUTPUT_FORMAT_SFT)
 #define       VI_OUTPUT_OUTPUT_FORMAT_YUV420PLANAR	(6 << VI_OUTPUT_OUTPUT_FORMAT_SFT)
+#define       VI_OUTPUT_OUTPUT_FORMAT_VIP_BAYER_DIRECT	(9 << VI_OUTPUT_OUTPUT_FORMAT_SFT)
 
 #define TEGRA_VI_VIP_H_ACTIVE				0x00a4
 #define       VI_VIP_H_ACTIVE_PERIOD_SFT		16 /* active pixels/line, must be even */
@@ -89,26 +97,26 @@
 #define       VI_VIP_V_ACTIVE_PERIOD_SFT		16 /* active lines */
 #define       VI_VIP_V_ACTIVE_START_SFT			0
 
-#define TEGRA_VI_VB0_START_ADDRESS_FIRST		0x00c4
-#define TEGRA_VI_VB0_BASE_ADDRESS_FIRST			0x00c8
+#define TEGRA_VI_VB0_START_ADDRESS(n)			(0x00c4 + (n) * 44)
+#define TEGRA_VI_VB0_BASE_ADDRESS(n)			(0x00c8 + (n) * 44)
 #define TEGRA_VI_VB0_START_ADDRESS_U			0x00cc
 #define TEGRA_VI_VB0_BASE_ADDRESS_U			0x00d0
 #define TEGRA_VI_VB0_START_ADDRESS_V			0x00d4
 #define TEGRA_VI_VB0_BASE_ADDRESS_V			0x00d8
 
-#define TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE		0x00e0
-#define       VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT		16
-#define       VI_FIRST_OUTPUT_FRAME_WIDTH_SFT		0
+#define TEGRA_VI_OUTPUT_FRAME_SIZE(n)			(0x00e0 + (n) * 24)
+#define       VI_OUTPUT_FRAME_HEIGHT_SFT		16
+#define       VI_OUTPUT_FRAME_WIDTH_SFT			0
 
-#define TEGRA_VI_VB0_COUNT_FIRST			0x00e4
+#define TEGRA_VI_VB0_COUNT(n)				(0x00e4 + (n) * 24)
 
-#define TEGRA_VI_VB0_SIZE_FIRST				0x00e8
-#define       VI_VB0_SIZE_FIRST_V_SFT			16
-#define       VI_VB0_SIZE_FIRST_H_SFT			0
+#define TEGRA_VI_VB0_SIZE(n)				(0x00e8 + (n) * 24)
+#define       VI_VB0_SIZE_V_SFT				16
+#define       VI_VB0_SIZE_H_SFT				0
 
-#define TEGRA_VI_VB0_BUFFER_STRIDE_FIRST		0x00ec
-#define       VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT	30
-#define       VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT	0
+#define TEGRA_VI_VB0_BUFFER_STRIDE(n)			(0x00ec + (n) * 24)
+#define       VI_VB0_BUFFER_STRIDE_CHROMA_SFT		30
+#define       VI_VB0_BUFFER_STRIDE_LUMA_SFT		0
 
 #define TEGRA_VI_H_LPF_CONTROL				0x0108
 #define       VI_H_LPF_CONTROL_CHROMA_SFT		16
@@ -136,7 +144,7 @@
 #define       VI_CAMERA_CONTROL_TEST_MODE		BIT(1)
 #define       VI_CAMERA_CONTROL_VIP_ENABLE		BIT(0)
 
-#define TEGRA_VI_VI_ENABLE				0x01a4
+#define TEGRA_VI_VI_ENABLE(n)				(0x01a4 + (n) * 4)
 #define       VI_VI_ENABLE_SW_FLOW_CONTROL_OUT1		BIT(1)
 #define       VI_VI_ENABLE_FIRST_OUTPUT_TO_MEM_DISABLE	BIT(0)
 
@@ -366,8 +374,8 @@ static void tegra20_channel_vi_buffer_setup(struct tegra_vi_channel *chan,
 	case V4L2_PIX_FMT_VYUY:
 	case V4L2_PIX_FMT_YUYV:
 	case V4L2_PIX_FMT_YVYU:
-		tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_FIRST,  base);
-		tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_FIRST, base + chan->start_offset);
+		tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS(OUT_1),  base);
+		tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS(OUT_1), base + chan->start_offset);
 		break;
 	}
 }
@@ -455,6 +463,7 @@ static void tegra20_camera_capture_setup(struct tegra_vi_channel *chan)
 	int stride_l = chan->format.bytesperline;
 	int stride_c = (output_fourcc == V4L2_PIX_FMT_YUV420 ||
 			output_fourcc == V4L2_PIX_FMT_YVU420) ? 1 : 0;
+	int output_channel = OUT_1;
 	int main_output_format;
 	int yuv_output_format;
 
@@ -472,33 +481,33 @@ static void tegra20_camera_capture_setup(struct tegra_vi_channel *chan)
 	/* Set up raise-on-edge, so we get an interrupt on end of frame. */
 	tegra20_vi_write(chan, TEGRA_VI_VI_RAISE, VI_VI_RAISE_ON_EDGE);
 
-	tegra20_vi_write(chan, TEGRA_VI_VI_FIRST_OUTPUT_CONTROL,
+	tegra20_vi_write(chan, TEGRA_VI_VI_OUTPUT_CONTROL(output_channel),
 			 (chan->vflip ? VI_OUTPUT_V_DIRECTION : 0) |
 			 (chan->hflip ? VI_OUTPUT_H_DIRECTION : 0) |
 			 yuv_output_format << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT |
 			 main_output_format << VI_OUTPUT_OUTPUT_FORMAT_SFT);
 
 	/* Set up frame size */
-	tegra20_vi_write(chan, TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE,
-			 height << VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT |
-			 width  << VI_FIRST_OUTPUT_FRAME_WIDTH_SFT);
+	tegra20_vi_write(chan, TEGRA_VI_OUTPUT_FRAME_SIZE(output_channel),
+			 height << VI_OUTPUT_FRAME_HEIGHT_SFT |
+			 width  << VI_OUTPUT_FRAME_WIDTH_SFT);
 
 	/* First output memory enabled */
-	tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0);
+	tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE(output_channel), 0);
 
 	/* Set the number of frames in the buffer */
-	tegra20_vi_write(chan, TEGRA_VI_VB0_COUNT_FIRST, 1);
+	tegra20_vi_write(chan, TEGRA_VI_VB0_COUNT(output_channel), 1);
 
 	/* Set up buffer frame size */
-	tegra20_vi_write(chan, TEGRA_VI_VB0_SIZE_FIRST,
-			 height << VI_VB0_SIZE_FIRST_V_SFT |
-			 width  << VI_VB0_SIZE_FIRST_H_SFT);
+	tegra20_vi_write(chan, TEGRA_VI_VB0_SIZE(output_channel),
+			 height << VI_VB0_SIZE_V_SFT |
+			 width  << VI_VB0_SIZE_H_SFT);
 
-	tegra20_vi_write(chan, TEGRA_VI_VB0_BUFFER_STRIDE_FIRST,
-			 stride_l << VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT |
-			 stride_c << VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT);
+	tegra20_vi_write(chan, TEGRA_VI_VB0_BUFFER_STRIDE(output_channel),
+			 stride_l << VI_VB0_BUFFER_STRIDE_LUMA_SFT |
+			 stride_c << VI_VB0_BUFFER_STRIDE_CHROMA_SFT);
 
-	tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0);
+	tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE(output_channel), 0);
 }
 
 static int tegra20_vi_start_streaming(struct vb2_queue *vq, u32 count)
@@ -607,6 +616,7 @@ static int tegra20_vip_start_streaming(struct tegra_vip_channel *vip_chan)
 	struct tegra_vi_channel *vi_chan = v4l2_get_subdev_hostdata(&vip_chan->subdev);
 	int width  = vi_chan->format.width;
 	int height = vi_chan->format.height;
+	int output_channel = OUT_1;
 
 	unsigned int main_input_format;
 	unsigned int yuv_input_format;
@@ -637,10 +647,10 @@ static int tegra20_vip_start_streaming(struct tegra_vip_channel *vip_chan)
 			 GENMASK(9, 2) << VI_DATA_INPUT_SFT);
 	tegra20_vi_write(vi_chan, TEGRA_VI_PIN_INVERSION, 0);
 
-	tegra20_vi_write(vi_chan, TEGRA_VI_CONT_SYNCPT_OUT_1,
-			 VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT |
+	tegra20_vi_write(vi_chan, TEGRA_VI_CONT_SYNCPT_OUT(output_channel),
+			 VI_CONT_SYNCPT_OUT_CONTINUOUS_SYNCPT |
 			 host1x_syncpt_id(vi_chan->mw_ack_sp[0])
-			 << VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT);
+			 << VI_CONT_SYNCPT_OUT_SYNCPT_IDX_SFT);
 
 	tegra20_vi_write(vi_chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_STOP_CAPTURE);
 
-- 
2.48.1