From: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
To: Yannick Fertre <yannick.fertre@foss.st.com>,
Philippe Cornu <philippe.cornu@foss.st.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Christophe Roullier <christophe.roullier@foss.st.com>
Cc: <dri-devel@lists.freedesktop.org>, <devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v5 07/13] drm/stm: ltdc: support new hardware version for STM32MP25 SoC
Date: Fri, 22 Aug 2025 16:34:16 +0200 [thread overview]
Message-ID: <20250822-drm-misc-next-v5-7-9c825e28f733@foss.st.com> (raw)
In-Reply-To: <20250822-drm-misc-next-v5-0-9c825e28f733@foss.st.com>
From: Yannick Fertre <yannick.fertre@foss.st.com>
STM32MP25 SoC features a new version of the LTDC IP. Add its compatible
to the list of device to probe and implement its quirks.
This hardware supports a pad frequency of 150MHz and a peripheral bus
clock.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
drivers/gpu/drm/stm/drv.c | 12 +++++++++++-
drivers/gpu/drm/stm/ltdc.c | 38 +++++++++++++++++++++++++++++++++++---
drivers/gpu/drm/stm/ltdc.h | 5 +++++
3 files changed, 51 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 8ebcaf953782d806a738d5a41ff1f428b0ccff78..ab00d1a6140cc32e71e10abc82f7956328b518e3 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -236,8 +236,18 @@ static void stm_drm_platform_shutdown(struct platform_device *pdev)
drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
}
+static struct ltdc_plat_data stm_drm_plat_data = {
+ .pad_max_freq_hz = 90000000,
+};
+
+static struct ltdc_plat_data stm_drm_plat_data_mp25 = {
+ .pad_max_freq_hz = 150000000,
+};
+
static const struct of_device_id drv_dt_ids[] = {
- { .compatible = "st,stm32-ltdc"},
+ { .compatible = "st,stm32-ltdc", .data = &stm_drm_plat_data, },
+ { .compatible = "st,stm32mp251-ltdc", .data = &stm_drm_plat_data_mp25, },
+ { .compatible = "st,stm32mp255-ltdc", .data = &stm_drm_plat_data_mp25, },
{ /* end node */ },
};
MODULE_DEVICE_TABLE(of, drv_dt_ids);
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index ba315c66a04d72758b9d3cfcd842432877f66d3a..17548dd3484a0a3e1015c58c752b80f8892a0ff7 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
@@ -51,6 +52,7 @@
#define HWVER_10300 0x010300
#define HWVER_20101 0x020101
#define HWVER_40100 0x040100
+#define HWVER_40101 0x040101
/*
* The address of some registers depends on the HW version: such registers have
@@ -1779,6 +1781,7 @@ static int ltdc_get_caps(struct drm_device *ddev)
{
struct ltdc_device *ldev = ddev->dev_private;
u32 bus_width_log2, lcr, gc2r;
+ const struct ltdc_plat_data *pdata = of_device_get_match_data(ddev->dev);
/*
* at least 1 layer must be managed & the number of layers
@@ -1794,6 +1797,8 @@ static int ltdc_get_caps(struct drm_device *ddev)
ldev->caps.bus_width = 8 << bus_width_log2;
regmap_read(ldev->regmap, LTDC_IDR, &ldev->caps.hw_version);
+ ldev->caps.pad_max_freq_hz = pdata->pad_max_freq_hz;
+
switch (ldev->caps.hw_version) {
case HWVER_10200:
case HWVER_10300:
@@ -1811,7 +1816,6 @@ static int ltdc_get_caps(struct drm_device *ddev)
* does not work on 2nd layer.
*/
ldev->caps.non_alpha_only_l1 = true;
- ldev->caps.pad_max_freq_hz = 90000000;
if (ldev->caps.hw_version == HWVER_10200)
ldev->caps.pad_max_freq_hz = 65000000;
ldev->caps.nb_irq = 2;
@@ -1842,6 +1846,7 @@ static int ltdc_get_caps(struct drm_device *ddev)
ldev->caps.fifo_threshold = false;
break;
case HWVER_40100:
+ case HWVER_40101:
ldev->caps.layer_ofs = LAY_OFS_1;
ldev->caps.layer_regs = ltdc_layer_regs_a2;
ldev->caps.pix_fmt_hw = ltdc_pix_fmt_a2;
@@ -1849,7 +1854,6 @@ static int ltdc_get_caps(struct drm_device *ddev)
ldev->caps.pix_fmt_nb = ARRAY_SIZE(ltdc_drm_fmt_a2);
ldev->caps.pix_fmt_flex = true;
ldev->caps.non_alpha_only_l1 = false;
- ldev->caps.pad_max_freq_hz = 90000000;
ldev->caps.nb_irq = 2;
ldev->caps.ycbcr_input = true;
ldev->caps.ycbcr_output = true;
@@ -1872,6 +1876,8 @@ void ltdc_suspend(struct drm_device *ddev)
DRM_DEBUG_DRIVER("\n");
clk_disable_unprepare(ldev->pixel_clk);
+ if (ldev->bus_clk)
+ clk_disable_unprepare(ldev->bus_clk);
}
int ltdc_resume(struct drm_device *ddev)
@@ -1887,7 +1893,13 @@ int ltdc_resume(struct drm_device *ddev)
return ret;
}
- return 0;
+ if (ldev->bus_clk) {
+ ret = clk_prepare_enable(ldev->bus_clk);
+ if (ret)
+ drm_err(ddev, "failed to enable bus clock (%d)\n", ret);
+ }
+
+ return ret;
}
int ltdc_load(struct drm_device *ddev)
@@ -1922,6 +1934,20 @@ int ltdc_load(struct drm_device *ddev)
return -ENODEV;
}
+ if (of_device_is_compatible(np, "st,stm32mp251-ltdc") ||
+ of_device_is_compatible(np, "st,stm32mp255-ltdc")) {
+ ldev->bus_clk = devm_clk_get(dev, "bus");
+ if (IS_ERR(ldev->bus_clk))
+ return dev_err_probe(dev, PTR_ERR(ldev->bus_clk),
+ "Unable to get bus clock\n");
+
+ ret = clk_prepare_enable(ldev->bus_clk);
+ if (ret) {
+ drm_err(ddev, "Unable to prepare bus clock\n");
+ return ret;
+ }
+ }
+
/* Get endpoints if any */
for (i = 0; i < nb_endpoints; i++) {
ret = drm_of_find_panel_or_bridge(np, 0, i, &panel, &bridge);
@@ -2034,6 +2060,9 @@ int ltdc_load(struct drm_device *ddev)
clk_disable_unprepare(ldev->pixel_clk);
+ if (ldev->bus_clk)
+ clk_disable_unprepare(ldev->bus_clk);
+
pinctrl_pm_select_sleep_state(ddev->dev);
pm_runtime_enable(ddev->dev);
@@ -2042,6 +2071,9 @@ int ltdc_load(struct drm_device *ddev)
err:
clk_disable_unprepare(ldev->pixel_clk);
+ if (ldev->bus_clk)
+ clk_disable_unprepare(ldev->bus_clk);
+
return ret;
}
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 9d488043ffdbc652deeede71c9d57d45fb89d3c6..ddfa8ae61a7ba5dc446fae647562d0ec8e6953e1 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -40,10 +40,15 @@ struct fps_info {
ktime_t last_timestamp;
};
+struct ltdc_plat_data {
+ int pad_max_freq_hz; /* max frequency supported by pad */
+};
+
struct ltdc_device {
void __iomem *regs;
struct regmap *regmap;
struct clk *pixel_clk; /* lcd pixel clock */
+ struct clk *bus_clk; /* bus clock */
struct mutex err_lock; /* protecting error_status */
struct ltdc_caps caps;
u32 irq_status;
--
2.25.1
next prev parent reply other threads:[~2025-08-22 14:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-22 14:34 [PATCH v5 00/13] Enable display support for STM32MP25 Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 01/13] dt-bindings: display: st: add two new compatibles to LTDC device Raphael Gallais-Pou
2025-08-24 9:21 ` Krzysztof Kozlowski
2025-08-28 13:51 ` Philippe CORNU
2025-08-22 14:34 ` [PATCH v5 02/13] dt-bindings: display: st,stm32-ltdc: add access-controllers property Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 03/13] dt-bindings: display: st: add new compatible to LVDS device Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 04/13] dt-bindings: display: st,stm32mp25-lvds: add access-controllers property Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 05/13] dt-bindings: display: st,stm32mp25-lvds: add power-domains property Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 06/13] dt-bindings: arm: stm32: add required #clock-cells property Raphael Gallais-Pou
2025-08-28 15:18 ` Christophe ROULLIER
2025-08-28 15:28 ` Raphael Gallais-Pou
2025-08-22 14:34 ` Raphael Gallais-Pou [this message]
2025-08-28 13:52 ` [PATCH v5 07/13] drm/stm: ltdc: support new hardware version for STM32MP25 SoC Philippe CORNU
2025-08-22 14:34 ` [PATCH v5 08/13] drm/stm: ltdc: handle lvds pixel clock Raphael Gallais-Pou
2025-08-28 13:53 ` Philippe CORNU
2025-08-22 14:34 ` [PATCH v5 09/13] arm64: dts: st: add ltdc support on stm32mp251 Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 10/13] arm64: dts: st: add ltdc support on stm32mp255 Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 11/13] arm64: dts: st: add lvds " Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 12/13] arm64: dts: st: add clock-cells to syscfg node on stm32mp251 Raphael Gallais-Pou
2025-08-22 14:34 ` [PATCH v5 13/13] arm64: dts: st: enable display support on stm32mp257f-ev1 board Raphael Gallais-Pou
2025-08-28 15:27 ` [PATCH v5 00/13] Enable display support for STM32MP25 Philippe CORNU
2025-08-29 7:10 ` Raphael Gallais-Pou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250822-drm-misc-next-v5-7-9c825e28f733@foss.st.com \
--to=raphael.gallais-pou@foss.st.com \
--cc=airlied@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=catalin.marinas@arm.com \
--cc=christophe.roullier@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mripard@kernel.org \
--cc=philippe.cornu@foss.st.com \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=will@kernel.org \
--cc=yannick.fertre@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).