[PATCH v3 0/7] drm/msm: Add display support for Glymur platform

[PATCH v3 0/7] drm/msm: Add display support for Glymur platform

[Abel Vesa]

The Glymur MDSS is based on the one found in SM8750, with 2 minor number
version bump.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
Changes in v3:
 - Re-worded first commit in order to better suggest the incompatiblity
   with previous platforms.
 - Picked up Krzysztof R-b tag for 1st patch.
 - Picked up Dmitry's R-b tag for 7th patch.
 - Link to v2: https://lore.kernel.org/r/20251014-glymur-display-v2-0-ff935e2f88c5@linaro.org

Changes in v2:
 - Picked-up Krzysztof's and Dmitry's R-b tags.
 - Fixed the bindings check reported by Rob.
 - Fixed indentation reported by Krzysztof.
 - Re-worded the commits to better explain the incompatibility
   with previous platforms.
 - Add the UBWC config patch, as suggested by Dmitry.
 - Link to v1: https://lore.kernel.org/r/20250911-glymur-display-v1-0-d391a343292e@linaro.org

---
Abel Vesa (7):
      dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem
      dt-bindings: display: msm: Document the Glymur Display Processing Unit
      dt-bindings: display: msm: Document the Glymur DiplayPort controller
      drm/msm/mdss: Add Glymur device configuration
      drm/msm/dpu: Add support for Glymur
      drm/msm/dp: Add support for Glymur
      soc: qcom: ubwc: Add configuration Glymur platform

 .../bindings/display/msm/dp-controller.yaml        |   3 +
 .../bindings/display/msm/qcom,glymur-mdss.yaml     | 264 ++++++++++
 .../bindings/display/msm/qcom,sm8650-dpu.yaml      |   1 +
 .../drm/msm/disp/dpu1/catalog/dpu_12_2_glymur.h    | 541 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   6 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 drivers/gpu/drm/msm/dp/dp_display.c                |   9 +
 drivers/gpu/drm/msm/msm_mdss.c                     |   1 +
 drivers/soc/qcom/ubwc_config.c                     |  12 +
 11 files changed, 840 insertions(+)
---
base-commit: 8fec172c82c2b5f6f8e47ab837c1dc91ee3d1b87
change-id: 20250910-glymur-display-12d18a2bd741

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>

[PATCH v3 1/7] dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem

[Abel Vesa]

The MDSS/MDP display subsystem found on Glymur platform is 2 minor version
increase compared to SM8750, which makes it incompatible with all previous
platforms. So document it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../bindings/display/msm/qcom,glymur-mdss.yaml     | 264 +++++++++++++++++++++
 1 file changed, 264 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2329ed96e6cb37bf63a686e966aa81e690fc5dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml
@@ -0,0 +1,264 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Glymur Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,glymur-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,glymur-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+            compatible = "qcom,glymur-mdss";
+            reg = <0x0ae00000 0x1000>;
+            reg-names = "mdss";
+
+            interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+            clocks = <&dispcc_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>,
+                     <&dispcc_mdp_clk>;
+            clock-names = "bus", "nrt_bus", "core";
+
+            interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+            interconnect-names = "mdp0-mem",
+                                 "cpu-cfg";
+
+            resets = <&disp_cc_mdss_core_bcr>;
+
+            power-domains = <&mdss_gdsc>;
+
+            iommus = <&apps_smmu 0x1c00 0x2>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            display-controller@ae01000 {
+                compatible = "qcom,glymur-dpu";
+                reg = <0x0ae01000 0x8f000>,
+                      <0x0aeb0000 0x2008>;
+                reg-names = "mdp", "vbif";
+
+                clocks = <&gcc_axi_clk>,
+                         <&dispcc_ahb_clk>,
+                         <&dispcc_mdp_lut_clk>,
+                         <&dispcc_mdp_clk>,
+                         <&dispcc_mdp_vsync_clk>;
+                clock-names = "nrt_bus",
+                              "iface",
+                              "lut",
+                              "core",
+                              "vsync";
+
+                assigned-clocks = <&dispcc_mdp_vsync_clk>;
+                assigned-clock-rates = <19200000>;
+
+                operating-points-v2 = <&mdp_opp_table>;
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        dpu_intf1_out: endpoint {
+                            remote-endpoint = <&dsi0_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        dpu_intf2_out: endpoint {
+                            remote-endpoint = <&dsi1_in>;
+                        };
+                    };
+                };
+
+                mdp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-200000000 {
+                        opp-hz = /bits/ 64 <200000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-325000000 {
+                        opp-hz = /bits/ 64 <325000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-375000000 {
+                        opp-hz = /bits/ 64 <375000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-514000000 {
+                        opp-hz = /bits/ 64 <514000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+            };
+
+            displayport-controller@ae90000 {
+                compatible = "qcom,glymur-dp";
+                reg = <0xae90000 0x200>,
+                      <0xae90200 0x200>,
+                      <0xae90400 0x600>,
+                      <0xae91000 0x400>,
+                      <0xae91400 0x400>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <12>;
+
+                clocks = <&dispcc_mdss_ahb_clk>,
+                         <&dispcc_dptx0_aux_clk>,
+                         <&dispcc_dptx0_link_clk>,
+                         <&dispcc_dptx0_link_intf_clk>,
+                         <&dispcc_dptx0_pixel0_clk>,
+                         <&dispcc_dptx0_pixel1_clk>;
+                clock-names = "core_iface",
+                              "core_aux",
+                              "ctrl_link",
+                              "ctrl_link_iface",
+                              "stream_pixel",
+                              "stream_1_pixel";
+
+                assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                                  <&dispcc_mdss_dptx0_pixel0_clk_src>,
+                                  <&dispcc_mdss_dptx0_pixel1_clk_src>;
+                assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+                operating-points-v2 = <&mdss_dp0_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+                phy-names = "dp";
+
+                #sound-dai-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dp0_in: endpoint {
+                          remote-endpoint = <&mdss_intf0_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dp0_out: endpoint {
+                        };
+                    };
+                };
+
+                mdss_dp0_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-160000000 {
+                        opp-hz = /bits/ 64 <160000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-270000000 {
+                        opp-hz = /bits/ 64 <270000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-540000000 {
+                        opp-hz = /bits/ 64 <540000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-810000000 {
+                        opp-hz = /bits/ 64 <810000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+            };
+        };
+...

-- 
2.48.1

[PATCH v3 2/7] dt-bindings: display: msm: Document the Glymur Display Processing Unit

[Abel Vesa]

Add DPU for Qualcomm Glymur SoC which has very few changes compared
to SM8750, just enough to make them incompatible.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
index 0a46120dd8680371ed031f7773859716f49c3aa1..feb1b8030ae0e381118a9482252a915199e19383 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -14,6 +14,7 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 properties:
   compatible:
     enum:
+      - qcom,glymur-dpu
       - qcom,sa8775p-dpu
       - qcom,sm8650-dpu
       - qcom,sm8750-dpu

-- 
2.48.1

[PATCH v3 3/7] dt-bindings: display: msm: Document the Glymur DiplayPort controller

[Abel Vesa]

Document the DisplayPort controller found in the Qualcomm Glymur SoC.
There are 4 controllers and their new core revision is different when
compared to all previous platforms, therefore being incompatible.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index aeb4e4f36044a0ff1e78ad47b867e232b21df509..26f5043748c166aa44be4e62445a63106edf9578 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - qcom,glymur-dp
           - qcom,sa8775p-dp
           - qcom,sc7180-dp
           - qcom,sc7280-dp
@@ -195,6 +196,7 @@ allOf:
           compatible:
             contains:
               enum:
+                - qcom,glymur-dp
                 - qcom,sa8775p-dp
                 - qcom,x1e80100-dp
       then:
@@ -239,6 +241,7 @@ allOf:
             enum:
               # these platforms support 2 streams MST on some interfaces,
               # others are SST only
+              - qcom,glymur-dp
               - qcom,sc8280xp-dp
               - qcom,x1e80100-dp
     then:

-- 
2.48.1

[PATCH v3 4/7] drm/msm/mdss: Add Glymur device configuration

[Abel Vesa]

Add Mobile Display Subsystem (MDSS) support for the Glymur platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/gpu/drm/msm/msm_mdss.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index 2d0e3e784c044db8ac0c478446d211a982cf0350..60bd6af83a8846f2ad751ea625a20e419c80638b 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -553,6 +553,7 @@ static const struct msm_mdss_data data_153k6 = {
 
 static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,mdss", .data = &data_153k6 },
+	{ .compatible = "qcom,glymur-mdss", .data = &data_57k },
 	{ .compatible = "qcom,msm8998-mdss", .data = &data_76k8 },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &data_76k8 },
 	{ .compatible = "qcom,sa8775p-mdss", .data = &data_74k },

-- 
2.48.1

[PATCH v3 5/7] drm/msm/dpu: Add support for Glymur

[Abel Vesa]

Add DPU version v12.2 support for the Glymur platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../drm/msm/disp/dpu1/catalog/dpu_12_2_glymur.h    | 541 +++++++++++++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |   6 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   1 +
 5 files changed, 550 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_2_glymur.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_2_glymur.h
new file mode 100644
index 0000000000000000000000000000000000000000..13bb43ba67d3f4f63ac492e0e1c5757b55e7b61b
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_12_2_glymur.h
@@ -0,0 +1,541 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2025 Linaro Limited
+ */
+
+#ifndef _DPU_12_2_GLYMUR_H
+#define _DPU_12_2_GLYMUR_H
+
+static const struct dpu_caps glymur_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0xb,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = true,
+	.max_linewidth = 8192,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
+static const struct dpu_mdp_cfg glymur_mdp = {
+	.name = "top_0",
+	.base = 0, .len = 0x494,
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
+	},
+};
+
+static const struct dpu_ctl_cfg glymur_ctl[] = {
+	{
+		.name = "ctl_0", .id = CTL_0,
+		.base = 0x15000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	}, {
+		.name = "ctl_1", .id = CTL_1,
+		.base = 0x16000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	}, {
+		.name = "ctl_2", .id = CTL_2,
+		.base = 0x17000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	}, {
+		.name = "ctl_3", .id = CTL_3,
+		.base = 0x18000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	}, {
+		.name = "ctl_4", .id = CTL_4,
+		.base = 0x19000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	}, {
+		.name = "ctl_5", .id = CTL_5,
+		.base = 0x1a000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	}, {
+		.name = "ctl_6", .id = CTL_6,
+		.base = 0x1b000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 14),
+	}, {
+		.name = "ctl_7", .id = CTL_7,
+		.base = 0x1c000, .len = 0x1000,
+		.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 15),
+	},
+};
+
+static const struct dpu_sspp_cfg glymur_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_2", .id = SSPP_VIG2,
+		.base = 0x8000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 8,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_3", .id = SSPP_VIG3,
+		.base = 0xa000, .len = 0x344,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_3_4,
+		.xin_id = 12,
+		.type = SSPP_TYPE_VIG,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_11", .id = SSPP_DMA3,
+		.base = 0x2a000, .len = 0x344,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 13,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_12", .id = SSPP_DMA4,
+		.base = 0x2c000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 14,
+		.type = SSPP_TYPE_DMA,
+	}, {
+		.name = "sspp_13", .id = SSPP_DMA5,
+		.base = 0x2e000, .len = 0x344,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 15,
+		.type = SSPP_TYPE_DMA,
+	},
+};
+
+static const struct dpu_lm_cfg glymur_lm[] = {
+	{
+		.name = "lm_0", .id = LM_0,
+		.base = 0x44000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_1,
+		.pingpong = PINGPONG_0,
+		.dspp = DSPP_0,
+	}, {
+		.name = "lm_1", .id = LM_1,
+		.base = 0x45000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_0,
+		.pingpong = PINGPONG_1,
+		.dspp = DSPP_1,
+	}, {
+		.name = "lm_2", .id = LM_2,
+		.base = 0x46000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_3,
+		.pingpong = PINGPONG_2,
+		.dspp = DSPP_2,
+	}, {
+		.name = "lm_3", .id = LM_3,
+		.base = 0x47000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_2,
+		.pingpong = PINGPONG_3,
+		.dspp = DSPP_3,
+	}, {
+		.name = "lm_4", .id = LM_4,
+		.base = 0x48000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_5,
+		.pingpong = PINGPONG_4,
+	}, {
+		.name = "lm_5", .id = LM_5,
+		.base = 0x49000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_4,
+		.pingpong = PINGPONG_5,
+	}, {
+		.name = "lm_6", .id = LM_6,
+		.base = 0x4a000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_7,
+		.pingpong = PINGPONG_6,
+	}, {
+		.name = "lm_7", .id = LM_7,
+		.base = 0x4b000, .len = 0x400,
+		.features = MIXER_MSM8998_MASK,
+		.sblk = &sm8750_lm_sblk,
+		.lm_pair = LM_6,
+		.pingpong = PINGPONG_7,
+	},
+};
+
+static const struct dpu_dspp_cfg glymur_dspp[] = {
+	{
+		.name = "dspp_0", .id = DSPP_0,
+		.base = 0x54000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_1", .id = DSPP_1,
+		.base = 0x56000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_2", .id = DSPP_2,
+		.base = 0x58000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_3", .id = DSPP_3,
+		.base = 0x5a000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_4", .id = DSPP_4,
+		.base = 0x5c000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_5", .id = DSPP_5,
+		.base = 0x5e000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_6", .id = DSPP_6,
+		.base = 0x60000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	}, {
+		.name = "dspp_7", .id = DSPP_7,
+		.base = 0x62000, .len = 0x1800,
+		.sblk = &sm8750_dspp_sblk,
+	},
+};
+
+static const struct dpu_pingpong_cfg glymur_pp[] = {
+	{
+		.name = "pingpong_0", .id = PINGPONG_0,
+		.base = 0x69000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+	}, {
+		.name = "pingpong_1", .id = PINGPONG_1,
+		.base = 0x6a000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_0,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9),
+	}, {
+		.name = "pingpong_2", .id = PINGPONG_2,
+		.base = 0x6b000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
+	}, {
+		.name = "pingpong_3", .id = PINGPONG_3,
+		.base = 0x6c000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_1,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
+	}, {
+		.name = "pingpong_4", .id = PINGPONG_4,
+		.base = 0x6d000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30),
+	}, {
+		.name = "pingpong_5", .id = PINGPONG_5,
+		.base = 0x6e000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_2,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31),
+	}, {
+		.name = "pingpong_6", .id = PINGPONG_6,
+		.base = 0x6f000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 20),
+	}, {
+		.name = "pingpong_7", .id = PINGPONG_7,
+		.base = 0x70000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_3,
+		.intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 21),
+	}, {
+		.name = "pingpong_cwb_0", .id = PINGPONG_CWB_0,
+		.base = 0x66000, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_4,
+	}, {
+		.name = "pingpong_cwb_1", .id = PINGPONG_CWB_1,
+		.base = 0x66400, .len = 0,
+		.sblk = &sc7280_pp_sblk,
+		.merge_3d = MERGE_3D_4,
+	},
+};
+
+static const struct dpu_merge_3d_cfg glymur_merge_3d[] = {
+	{
+		.name = "merge_3d_0", .id = MERGE_3D_0,
+		.base = 0x4e000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_1", .id = MERGE_3D_1,
+		.base = 0x4f000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_2", .id = MERGE_3D_2,
+		.base = 0x50000, .len = 0x1c,
+	}, {
+		.name = "merge_3d_3", .id = MERGE_3D_3,
+		.base = 0x51000, .len = 0x1c,
+	},
+};
+
+/*
+ * NOTE: Each display compression engine (DCE) contains dual hard
+ * slice DSC encoders so both share same base address but with
+ * its own different sub block address.
+ */
+static const struct dpu_dsc_cfg glymur_dsc[] = {
+	{
+		.name = "dce_0_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_0_1", .id = DSC_1,
+		.base = 0x80000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_1_0", .id = DSC_2,
+		.base = 0x81000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_1_1", .id = DSC_3,
+		.base = 0x81000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_2_0", .id = DSC_4,
+		.base = 0x82000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_2_1", .id = DSC_5,
+		.base = 0x82000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	}, {
+		.name = "dce_3_0", .id = DSC_6,
+		.base = 0x83000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_0,
+	}, {
+		.name = "dce_3_1", .id = DSC_7,
+		.base = 0x83000, .len = 0x8,
+		.features = BIT(DPU_DSC_NATIVE_42x_EN),
+		.sblk = &sm8750_dsc_sblk_1,
+	},
+
+};
+
+static const struct dpu_wb_cfg glymur_wb[] = {
+	{
+		.name = "wb_2", .id = WB_2,
+		.base = 0x65000, .len = 0x2c8,
+		.features = WB_SDM845_MASK,
+		.format_list = wb2_formats_rgb_yuv,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv),
+		.xin_id = 6,
+		.vbif_idx = VBIF_RT,
+		.maxlinewidth = 4096,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+	},
+};
+
+static const struct dpu_cwb_cfg glymur_cwb[] = {
+	{
+		.name = "cwb_0", .id = CWB_0,
+		.base = 0x66200, .len = 0x20,
+	},
+	{
+		.name = "cwb_1", .id = CWB_1,
+		.base = 0x66600, .len = 0x20,
+	},
+	{
+		.name = "cwb_2", .id = CWB_2,
+		.base = 0x7e200, .len = 0x20,
+	},
+	{
+		.name = "cwb_3", .id = CWB_3,
+		.base = 0x7e600, .len = 0x20,
+	},
+};
+
+static const struct dpu_intf_cfg glymur_intf[] = {
+	{
+		.name = "intf_0", .id = INTF_0,
+		.base = 0x34000, .len = 0x400,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25),
+	}, {
+		.name = "intf_1", .id = INTF_1,
+		.base = 0x35000, .len = 0x400,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_0,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2),
+	}, {
+		.name = "intf_2", .id = INTF_2,
+		.base = 0x36000, .len = 0x400,
+		.type = INTF_DSI,
+		.controller_id = MSM_DSI_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 28),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 29),
+		.intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF2_TEAR_INTR, 2),
+	}, {
+		.name = "intf_3", .id = INTF_3,
+		.base = 0x37000, .len = 0x400,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_0,	/* pair with intf_0 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31),
+	}, {
+		.name = "intf_4", .id = INTF_4,
+		.base = 0x38000, .len = 0x400,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_1,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21),
+	}, {
+		.name = "intf_5", .id = INTF_5,
+		.base = 0x39000, .len = 0x400,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_3,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 22),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 23),
+	}, {
+		.name = "intf_6", .id = INTF_6,
+		.base = 0x3A000, .len = 0x400,
+		.type = INTF_DP,
+		.controller_id = MSM_DP_CONTROLLER_2,
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17),
+	}, {
+		.name = "intf_7", .id = INTF_7,
+		.base = 0x3b000, .len = 0x400,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_2,	/* pair with intf_6 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 18),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 19),
+	}, {
+		.name = "intf_8", .id = INTF_8,
+		.base = 0x3c000, .len = 0x400,
+		.type = INTF_NONE,
+		.controller_id = MSM_DP_CONTROLLER_1,	/* pair with intf_4 for DP MST */
+		.prog_fetch_lines_worst_case = 24,
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13),
+	},
+};
+
+static const struct dpu_perf_cfg glymur_perf_data = {
+	.max_bw_low = 18900000,
+	.max_bw_high = 28500000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 800000,
+	.min_prefill_lines = 35,
+	.danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0},
+	.safe_lut_tbl = {0xfe00, 0xfe00, 0xffff},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
+		.entries = sc7180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+		.entries = sc7180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_mdss_version glymur_mdss_ver = {
+	.core_major_ver = 12,
+	.core_minor_ver = 2,
+};
+
+const struct dpu_mdss_cfg dpu_glymur_cfg = {
+	.mdss_ver = &glymur_mdss_ver,
+	.caps = &glymur_dpu_caps,
+	.mdp = &glymur_mdp,
+	.cdm = &dpu_cdm_5_x,
+	.ctl_count = ARRAY_SIZE(glymur_ctl),
+	.ctl = glymur_ctl,
+	.sspp_count = ARRAY_SIZE(glymur_sspp),
+	.sspp = glymur_sspp,
+	.mixer_count = ARRAY_SIZE(glymur_lm),
+	.mixer = glymur_lm,
+	.dspp_count = ARRAY_SIZE(glymur_dspp),
+	.dspp = glymur_dspp,
+	.pingpong_count = ARRAY_SIZE(glymur_pp),
+	.pingpong = glymur_pp,
+	.dsc_count = ARRAY_SIZE(glymur_dsc),
+	.dsc = glymur_dsc,
+	.merge_3d_count = ARRAY_SIZE(glymur_merge_3d),
+	.merge_3d = glymur_merge_3d,
+	.wb_count = ARRAY_SIZE(glymur_wb),
+	.wb = glymur_wb,
+	.cwb_count = ARRAY_SIZE(glymur_cwb),
+	.cwb = sm8650_cwb,
+	.intf_count = ARRAY_SIZE(glymur_intf),
+	.intf = glymur_intf,
+	.vbif_count = ARRAY_SIZE(sm8650_vbif),
+	.vbif = sm8650_vbif,
+	.perf = &glymur_perf_data,
+};
+
+#endif
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 6641455c4ec6a2d082644f1488ea5f5605ccc208..64e2f8a765530c7181292b3b3a7d54c4e9431963 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -726,3 +726,4 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 
 #include "catalog/dpu_10_0_sm8650.h"
 #include "catalog/dpu_12_0_sm8750.h"
+#include "catalog/dpu_12_2_glymur.h"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index f0768f54e9b3d5a3f5a7bec4b66127f2e2284cfd..4964e70610d1b6a2bf6456e767cc30a8ea653349 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -749,6 +749,7 @@ struct dpu_mdss_cfg {
 	const struct dpu_format_extended *vig_formats;
 };
 
+extern const struct dpu_mdss_cfg dpu_glymur_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8917_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8937_cfg;
 extern const struct dpu_mdss_cfg dpu_msm8953_cfg;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index 175639c8bfbb9bbd02ed35f1780bcbd869f08c36..1ca22971aa9cb684648e492b4c538fdfbfa6b5e3 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -149,6 +149,10 @@ enum dpu_dspp {
 	DSPP_1,
 	DSPP_2,
 	DSPP_3,
+	DSPP_4,
+	DSPP_5,
+	DSPP_6,
+	DSPP_7,
 	DSPP_MAX
 };
 
@@ -159,6 +163,8 @@ enum dpu_ctl {
 	CTL_3,
 	CTL_4,
 	CTL_5,
+	CTL_6,
+	CTL_7,
 	CTL_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 4e5a8ecd31f7570beb45fd1629a131e70aaefea8..f4c9767c418d38eb487934da03b352ce7063df16 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1505,6 +1505,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
 };
 
 static const struct of_device_id dpu_dt_match[] = {
+	{ .compatible = "qcom,glymur-dpu", .data = &dpu_glymur_cfg, },
 	{ .compatible = "qcom,msm8917-mdp5", .data = &dpu_msm8917_cfg, },
 	{ .compatible = "qcom,msm8937-mdp5", .data = &dpu_msm8937_cfg, },
 	{ .compatible = "qcom,msm8953-mdp5", .data = &dpu_msm8953_cfg, },

-- 
2.48.1

[PATCH v3 6/7] drm/msm/dp: Add support for Glymur

[Abel Vesa]

The Qualcomm Glymur platform comes with 4 DisplayPort controllers, which
have a different core revision compared to all previous platforms.

Describe them and add the compatible.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index d87d47cc7ec3eb757ac192c411000bc50b824c59..9bd9cd5c1e03cc17598b222177b6682bbcd89f0c 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -130,6 +130,14 @@ struct msm_dp_desc {
 	bool wide_bus_supported;
 };
 
+static const struct msm_dp_desc msm_dp_desc_glymur[] = {
+	{ .io_start = 0x0af54000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
+	{ .io_start = 0x0af5c000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
+	{ .io_start = 0x0af64000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+	{ .io_start = 0x0af6c000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
+	{}
+};
+
 static const struct msm_dp_desc msm_dp_desc_sa8775p[] = {
 	{ .io_start = 0x0af54000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
 	{ .io_start = 0x0af5c000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
@@ -187,6 +195,7 @@ static const struct msm_dp_desc msm_dp_desc_x1e80100[] = {
 };
 
 static const struct of_device_id msm_dp_dt_match[] = {
+	{ .compatible = "qcom,glymur-dp", .data = &msm_dp_desc_glymur },
 	{ .compatible = "qcom,sa8775p-dp", .data = &msm_dp_desc_sa8775p },
 	{ .compatible = "qcom,sc7180-dp", .data = &msm_dp_desc_sc7180 },
 	{ .compatible = "qcom,sc7280-dp", .data = &msm_dp_desc_sc7280 },

-- 
2.48.1

[PATCH v3 7/7] soc: qcom: ubwc: Add configuration Glymur platform

[Abel Vesa]

Describe the Universal Bandwidth Compression (UBWC) configuration
for the new Glymur platform.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/soc/qcom/ubwc_config.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/soc/qcom/ubwc_config.c b/drivers/soc/qcom/ubwc_config.c
index 15d373bff231d770e00fe0aee1b5a95c7b8a6305..7cca2afb68e3e9d33f3066f1deb3b9fcc01641a1 100644
--- a/drivers/soc/qcom/ubwc_config.c
+++ b/drivers/soc/qcom/ubwc_config.c
@@ -218,11 +218,23 @@ static const struct qcom_ubwc_cfg_data x1e80100_data = {
 	.macrotile_mode = true,
 };
 
+static const struct qcom_ubwc_cfg_data glymur_data = {
+	.ubwc_enc_version = UBWC_5_0,
+	.ubwc_dec_version = UBWC_5_0,
+	.ubwc_swizzle = UBWC_SWIZZLE_ENABLE_LVL2 |
+			UBWC_SWIZZLE_ENABLE_LVL3,
+	.ubwc_bank_spread = true,
+	/* TODO: highest_bank_bit = 15 for LP_DDR4 */
+	.highest_bank_bit = 16,
+	.macrotile_mode = true,
+};
+
 static const struct of_device_id qcom_ubwc_configs[] __maybe_unused = {
 	{ .compatible = "qcom,apq8016", .data = &no_ubwc_data },
 	{ .compatible = "qcom,apq8026", .data = &no_ubwc_data },
 	{ .compatible = "qcom,apq8074", .data = &no_ubwc_data },
 	{ .compatible = "qcom,apq8096", .data = &msm8998_data },
+	{ .compatible = "qcom,glymur", .data = &glymur_data},
 	{ .compatible = "qcom,msm8226", .data = &no_ubwc_data },
 	{ .compatible = "qcom,msm8916", .data = &no_ubwc_data },
 	{ .compatible = "qcom,msm8917", .data = &no_ubwc_data },

-- 
2.48.1