dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Kory Maincent (TI.com)" <kory.maincent@bootlin.com>
To: Jyri Sarha <jyri.sarha@iki.fi>,
	 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	 Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	 David Airlie <airlied@gmail.com>,
	Simona Vetter <simona@ffwll.ch>,  Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	 Bartosz Golaszewski <brgl@bgdev.pl>,
	Tony Lindgren <tony@atomide.com>,
	 Andrzej Hajda <andrzej.hajda@intel.com>,
	 Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	 Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	 Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>,
	 Bajjuri Praneeth <praneeth@ti.com>,
	 Luca Ceresoli <luca.ceresoli@bootlin.com>,
	 Louis Chauvet <louis.chauvet@bootlin.com>,
	 Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	 Miguel Gazquez <miguel.gazquez@bootlin.com>,
	 dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 linux-omap@vger.kernel.org,
	 "Kory Maincent (TI.com)" <kory.maincent@bootlin.com>
Subject: [PATCH v2 08/20] drm/tilcdc: Remove tilcdc_panel_info structure
Date: Thu, 11 Dec 2025 17:38:52 +0100	[thread overview]
Message-ID: <20251211-feature_tilcdc-v2-8-f48bac3cd33e@bootlin.com> (raw)
In-Reply-To: <20251211-feature_tilcdc-v2-0-f48bac3cd33e@bootlin.com>

Remove the tilcdc_panel_info structure and its associated helper
function as the structure contains only redundant or unused parameters.

Most panel configuration parameters in tilcdc_panel_info are either:
- Already represented by existing DRM mode flags (invert_pxl_clk,
  sync_edge via DRM_BUS_FLAG_*), or
- Set to identical values across all instances (panel_info_default),
  making them effectively constants

The removed fifo_th field is already handled by priv->fifo_th when set.
Other removed fields (tft_alt_mode, raster_order) were always set to 0
in the only instance (panel_info_default) and thus had no effect.

This simplifies the code by eliminating unnecessary abstraction while
preserving all functional behavior.

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c     | 28 +++------------------
 drivers/gpu/drm/tilcdc/tilcdc_drv.h      | 42 --------------------------------
 drivers/gpu/drm/tilcdc/tilcdc_external.c | 14 -----------
 3 files changed, 3 insertions(+), 81 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 252e5adaeb6e2..5b8aba0765f9b 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -31,7 +31,6 @@ struct tilcdc_crtc {
 	struct drm_crtc base;
 
 	struct drm_plane primary;
-	const struct tilcdc_panel_info *info;
 	struct drm_pending_vblank_event *event;
 	struct mutex enable_lock;
 	bool enabled;
@@ -272,14 +271,10 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct tilcdc_drm_private *priv = dev->dev_private;
-	const struct tilcdc_panel_info *info = tilcdc_crtc->info;
 	uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
 	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	struct drm_framebuffer *fb = crtc->primary->state->fb;
 
-	if (WARN_ON(!info))
-		return;
-
 	if (WARN_ON(!fb))
 		return;
 
@@ -287,12 +282,11 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 	reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
 	/* Use 16 bit DMA burst size by default */
 	reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
+
 	if (priv->fifo_th) {
 		int fifo_th_val = ilog2(priv->fifo_th) - 3;
 
 		reg |= (fifo_th_val << 8);
-	} else {
-		reg |= (info->fifo_th << 8);
 	}
 	tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
 
@@ -360,8 +354,6 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 		  LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
 		  0x000ff000 /* Palette Loading Delay bits */);
 	reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
-	if (info->tft_alt_mode)
-		reg |= LCDC_TFT_ALT_ENABLE;
 	if (priv->rev == 2) {
 		switch (fb->format->format) {
 		case DRM_FORMAT_BGR565:
@@ -384,15 +376,13 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 	reg |= 128 << 12;
 	tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
 
-	if (info->invert_pxl_clk ||
-	    mode->flags == DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
+	if (mode->flags == DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)
 		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 	else
 		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
 
 	tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
-	if (info->sync_edge ||
-	    mode->flags == DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
+	if (mode->flags == DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE)
 		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 	else
 		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
@@ -407,11 +397,6 @@ static void tilcdc_crtc_set_mode(struct drm_crtc *crtc)
 	else
 		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
 
-	if (info->raster_order)
-		tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
-	else
-		tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
-
 	tilcdc_crtc_set_clk(crtc);
 
 	tilcdc_crtc_load_palette(crtc);
@@ -838,13 +823,6 @@ static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
 	.atomic_flush	= tilcdc_crtc_atomic_flush,
 };
 
-void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
-		const struct tilcdc_panel_info *info)
-{
-	struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
-	tilcdc_crtc->info = info;
-}
-
 void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
index c23b593dc61f6..181b9d7a515b6 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_drv.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
@@ -114,53 +114,11 @@ void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
 		const struct tilcdc_module_ops *funcs);
 void tilcdc_module_cleanup(struct tilcdc_module *mod);
 
-/* Panel config that needs to be set in the crtc, but is not coming from
- * the mode timings.  The display module is expected to call
- * tilcdc_crtc_set_panel_info() to set this during modeset.
- */
-struct tilcdc_panel_info {
-
-	/* AC Bias Pin Frequency */
-	uint32_t ac_bias;
-
-	/* AC Bias Pin Transitions per Interrupt */
-	uint32_t ac_bias_intrpt;
-
-	/* DMA burst size */
-	uint32_t dma_burst_sz;
-
-	/* Bits per pixel */
-	uint32_t bpp;
-
-	/* FIFO DMA Request Delay */
-	uint32_t fdd;
-
-	/* TFT Alternative Signal Mapping (Only for active) */
-	bool tft_alt_mode;
-
-	/* Invert pixel clock */
-	bool invert_pxl_clk;
-
-	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
-	uint32_t sync_edge;
-
-	/* Horizontal and Vertical Sync: Control: 0=ignore */
-	uint32_t sync_ctrl;
-
-	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
-	uint32_t raster_order;
-
-	/* DMA FIFO threshold */
-	uint32_t fifo_th;
-};
-
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
 
 int tilcdc_crtc_create(struct drm_device *dev);
 irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
 void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
-void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
-		const struct tilcdc_panel_info *info);
 void tilcdc_crtc_shutdown(struct drm_crtc *crtc);
 void tilcdc_crtc_destroy(struct drm_crtc *crtc);
 int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_external.c b/drivers/gpu/drm/tilcdc/tilcdc_external.c
index 2970c41d9c3eb..81c90c2754c6c 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_external.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_external.c
@@ -14,18 +14,6 @@
 #include "tilcdc_drv.h"
 #include "tilcdc_external.h"
 
-static const struct tilcdc_panel_info panel_info_default = {
-		.ac_bias                = 255,
-		.ac_bias_intrpt         = 0,
-		.dma_burst_sz           = 16,
-		.bpp                    = 16,
-		.fdd                    = 0x80,
-		.tft_alt_mode           = 0,
-		.sync_edge              = 0,
-		.sync_ctrl              = 1,
-		.raster_order           = 0,
-};
-
 static
 struct drm_connector *tilcdc_encoder_find_connector(struct drm_device *ddev,
 						    struct drm_encoder *encoder)
@@ -55,8 +43,6 @@ int tilcdc_attach_bridge(struct drm_device *ddev, struct drm_bridge *bridge)
 	if (ret)
 		return ret;
 
-	tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_default);
-
 	priv->external_connector =
 		tilcdc_encoder_find_connector(ddev, priv->external_encoder);
 	if (!priv->external_connector)

-- 
2.43.0


  parent reply	other threads:[~2025-12-11 16:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-11 16:38 [PATCH v2 00/20] Clean and update tilcdc driver to support DRM_BRIDGE_ATTACH_NO_CONNECTOR Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 01/20] dt-bindings: display: tilcdc: Convert to DT schema Kory Maincent (TI.com)
2025-12-16  6:01   ` Krzysztof Kozlowski
2025-12-11 16:38 ` [PATCH v2 02/20] dt-bindings: display: tilcdc: Mark panel binding as deprecated Kory Maincent (TI.com)
2025-12-16  6:02   ` Krzysztof Kozlowski
2025-12-11 16:38 ` [PATCH v2 03/20] drm/tilcdc: Remove simulate_vesa_sync flag Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 04/20] drm/tilcdc: Add support for DRM bus flags and simplify panel config Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 05/20] drm/tilcdc: Convert legacy panel binding via DT overlay at boot time Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 06/20] drm/tilcdc: Remove tilcdc panel driver Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 07/20] drm/tilcdc: Remove component framework support Kory Maincent (TI.com)
2025-12-11 16:38 ` Kory Maincent (TI.com) [this message]
2025-12-11 16:38 ` [PATCH v2 09/20] drm/tilcdc: Remove redundant #endif/#ifdef in debugfs code Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 10/20] drm/tilcdc: Remove unused encoder and connector tracking arrays Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 11/20] drm/tilcdc: Rename external_encoder and external_connector to encoder and connector Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 12/20] drm/tilcdc: Rename tilcdc_external to tilcdc_encoder Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 13/20] drm/tilcdc: Remove the useless module list support Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 14/20] drm/tilcdc: Modernize driver initialization and cleanup paths Kory Maincent (TI.com)
2025-12-11 16:38 ` [PATCH v2 15/20] drm/tilcdc: Remove the use of drm_device private_data Kory Maincent (TI.com)
2025-12-11 16:39 ` [PATCH v2 16/20] drm/bridge: tda998x: Remove component support Kory Maincent (TI.com)
2025-12-11 16:39 ` [PATCH v2 17/20] drm/bridge: tda998x: Move tda998x_create/destroy into probe and remove Kory Maincent (TI.com)
2025-12-11 16:39 ` [PATCH v2 18/20] drm/bridge: tda998x: Remove useless tda998x_connector_destroy wrapper Kory Maincent (TI.com)
2025-12-11 16:39 ` [PATCH v2 19/20] drm/bridge: tda998x: Add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR Kory Maincent (TI.com)
2025-12-11 16:39 ` [PATCH v2 20/20] drm/tilcdc: " Kory Maincent (TI.com)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251211-feature_tilcdc-v2-8-f48bac3cd33e@bootlin.com \
    --to=kory.maincent@bootlin.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=brgl@bgdev.pl \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=jyri.sarha@iki.fi \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=louis.chauvet@bootlin.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=miguel.gazquez@bootlin.com \
    --cc=mripard@kernel.org \
    --cc=msp@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=praneeth@ti.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=tony@atomide.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).