From: <gregkh@linuxfoundation.org>
To: Jun.Ma2@amd.com, Rodrigo.Siqueira@amd.com, Roman.Li@amd.com,
Wayne.Lin@amd.com, Xinhui.Pan@amd.com, Zhigang.Luo@amd.com,
airlied@gmail.com, alex.hung@amd.com, alexander.deucher@amd.com,
amd-gfx@lists.freedesktop.org, christian.koenig@amd.com,
daniel@ffwll.ch, decce6@proton.me,
dri-devel@lists.freedesktop.org, evan.quan@amd.com,
gregkh@linuxfoundation.org, harry.wentland@amd.com,
hersenxs.wu@amd.com, lijo.lazar@amd.com,
mario.limonciello@amd.com, ray.wu@amd.com, rosenp@gmail.com,
sashal@kernel.org, spasswolf@web.de,
srinivasan.shanmugam@amd.com, sunpeng.li@amd.com,
superm1@kernel.org, timur.kristof@gmail.com, vulab@iscas.ac.cn
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "drm/amd/display: Add pixel_clock to amd_pp_display_configuration" has been added to the 6.1-stable tree
Date: Mon, 23 Mar 2026 14:03:37 +0100 [thread overview]
Message-ID: <2026032336-ahead-overuse-5fd1@gregkh> (raw)
In-Reply-To: <20260321054453.19683-4-rosenp@gmail.com>
This is a note to let you know that I've just added the patch titled
drm/amd/display: Add pixel_clock to amd_pp_display_configuration
to the 6.1-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-amd-display-add-pixel_clock-to-amd_pp_display_configuration.patch
and it can be found in the queue-6.1 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
From rosenp@gmail.com Sat Mar 21 06:45:19 2026
From: Rosen Penev <rosenp@gmail.com>
Date: Fri, 20 Mar 2026 22:44:52 -0700
Subject: drm/amd/display: Add pixel_clock to amd_pp_display_configuration
To: stable@vger.kernel.org
Cc: "Alex Deucher" <alexander.deucher@amd.com>, "Christian König" <christian.koenig@amd.com>, "Pan, Xinhui" <Xinhui.Pan@amd.com>, "David Airlie" <airlied@gmail.com>, "Daniel Vetter" <daniel@ffwll.ch>, "Harry Wentland" <harry.wentland@amd.com>, "Leo Li" <sunpeng.li@amd.com>, "Rodrigo Siqueira" <Rodrigo.Siqueira@amd.com>, "Evan Quan" <evan.quan@amd.com>, "Mario Limonciello" <mario.limonciello@amd.com>, "Sasha Levin" <sashal@kernel.org>, "Rosen Penev" <rosenp@gmail.com>, "Lijo Lazar" <lijo.lazar@amd.com>, "Ma Jun" <Jun.Ma2@amd.com>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Srinivasan Shanmugam" <srinivasan.shanmugam@amd.com>, "Mario Limonciello (AMD)" <superm1@kernel.org>, "Zhigang Luo" <Zhigang.Luo@amd.com>, "Bert Karwatzki" <spasswolf@web.de>, "Ray Wu" <ray.wu@amd.com>, "Wayne Lin" <Wayne.Lin@amd.com>, "Roman Li" <Roman.Li@amd.com>, "Hersen Wu" <hersenxs.wu@amd.com>, "Timur Kristóf" <timur.kristof@gmail.com>, "Alex Hung" <alex.hung@amd.com>, decce6 <decce6@proton.me>, "Went
ao Liang" <vulab@iscas.ac.cn>, amd-gfx@lists.freedesktop.org (open list:RADEON and AMDGPU DRM DRIVERS), dri-devel@lists.freedesktop.org (open list:DRM DRIVERS), linux-kernel@vger.kernel.org (open list)
Message-ID: <20260321054453.19683-4-rosenp@gmail.com>
From: Timur Kristóf <timur.kristof@gmail.com>
[ Upstream commit b515dcb0dc4e85d8254f5459cfb32fce88dacbfb ]
This commit adds the pixel_clock field to the display config
struct so that power management (DPM) can use it.
We currently don't have a proper bandwidth calculation on old
GPUs with DCE 6-10 because dce_calcs only supports DCE 11+.
So the power management (DPM) on these GPUs may need to make
ad-hoc decisions for display based on the pixel clock.
Also rename sym_clock to pixel_clock in dm_pp_single_disp_config
to avoid confusion with other code where the sym_clock refers to
the DisplayPort symbol clock.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c | 1 +
drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c | 2 +-
drivers/gpu/drm/amd/display/dc/dm_services_types.h | 2 +-
drivers/gpu/drm/amd/include/dm_pp_interface.h | 1 +
4 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_pp_smu.c
@@ -97,6 +97,7 @@ bool dm_pp_apply_display_requirements(
const struct dm_pp_single_disp_config *dc_cfg =
&pp_display_cfg->disp_configs[i];
adev->pm.pm_display_cfg.displays[i].controller_id = dc_cfg->pipe_idx + 1;
+ adev->pm.pm_display_cfg.displays[i].pixel_clock = dc_cfg->pixel_clock;
}
amdgpu_dpm_display_configuration_change(adev, &adev->pm.pm_display_cfg);
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
@@ -164,7 +164,7 @@ void dce110_fill_display_configs(
stream->link->cur_link_settings.link_rate;
cfg->link_settings.link_spread =
stream->link->cur_link_settings.link_spread;
- cfg->sym_clock = stream->phy_pix_clk;
+ cfg->pixel_clock = stream->phy_pix_clk;
/* Round v_refresh*/
cfg->v_refresh = stream->timing.pix_clk_100hz * 100;
cfg->v_refresh /= stream->timing.h_total;
--- a/drivers/gpu/drm/amd/display/dc/dm_services_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dm_services_types.h
@@ -127,7 +127,7 @@ struct dm_pp_single_disp_config {
uint32_t src_height;
uint32_t src_width;
uint32_t v_refresh;
- uint32_t sym_clock; /* HDMI only */
+ uint32_t pixel_clock; /* Pixel clock in KHz (for HDMI only: normalized) */
struct dc_link_settings link_settings; /* DP only */
};
--- a/drivers/gpu/drm/amd/include/dm_pp_interface.h
+++ b/drivers/gpu/drm/amd/include/dm_pp_interface.h
@@ -66,6 +66,7 @@ struct single_display_configuration
uint32_t view_resolution_cy;
enum amd_pp_display_config_type displayconfigtype;
uint32_t vertical_refresh; /* for active display */
+ uint32_t pixel_clock; /* Pixel clock in KHz (for HDMI only: normalized) */
};
#define MAX_NUM_DISPLAY 32
Patches currently in stable-queue which might be from rosenp@gmail.com are
queue-6.1/drm-amdgpu-clarify-dc-checks.patch
queue-6.1/drm-amd-pm-use-pm_display_cfg-in-legacy-dpm-v2.patch
queue-6.1/drm-amdgpu-use-proper-dc-check-in-amdgpu_display_supported_domains.patch
queue-6.1/drm-amd-display-add-pixel_clock-to-amd_pp_display_configuration.patch
next prev parent reply other threads:[~2026-03-23 13:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-21 5:44 [PATCHv3 for 6.1 0/4] amdgpu: fix panic on old GPUs Rosen Penev
2026-03-21 5:44 ` [PATCHv3 for 6.1 1/4] drm/amdgpu: use proper DC check in amdgpu_display_supported_domains() Rosen Penev
2026-03-23 13:03 ` Patch "drm/amdgpu: use proper DC check in amdgpu_display_supported_domains()" has been added to the 6.1-stable tree gregkh
2026-03-21 5:44 ` [PATCHv3 for 6.1 2/4] drm/amdgpu: clarify DC checks Rosen Penev
2026-03-23 13:03 ` Patch "drm/amdgpu: clarify DC checks" has been added to the 6.1-stable tree gregkh
2026-03-21 5:44 ` [PATCHv3 for 6.1 3/4] drm/amd/display: Add pixel_clock to amd_pp_display_configuration Rosen Penev
2026-03-23 13:03 ` gregkh [this message]
2026-03-21 5:44 ` [PATCHv3 for 6.1 4/4] drm/amd/pm: Use pm_display_cfg in legacy DPM (v2) Rosen Penev
2026-03-23 13:03 ` Patch "drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)" has been added to the 6.1-stable tree gregkh
2026-03-23 9:29 ` [PATCHv3 for 6.1 0/4] amdgpu: fix panic on old GPUs Christian König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2026032336-ahead-overuse-5fd1@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Jun.Ma2@amd.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=Roman.Li@amd.com \
--cc=Wayne.Lin@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=Zhigang.Luo@amd.com \
--cc=airlied@gmail.com \
--cc=alex.hung@amd.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=decce6@proton.me \
--cc=dri-devel@lists.freedesktop.org \
--cc=evan.quan@amd.com \
--cc=harry.wentland@amd.com \
--cc=hersenxs.wu@amd.com \
--cc=lijo.lazar@amd.com \
--cc=mario.limonciello@amd.com \
--cc=ray.wu@amd.com \
--cc=rosenp@gmail.com \
--cc=sashal@kernel.org \
--cc=spasswolf@web.de \
--cc=srinivasan.shanmugam@amd.com \
--cc=stable-commits@vger.kernel.org \
--cc=sunpeng.li@amd.com \
--cc=superm1@kernel.org \
--cc=timur.kristof@gmail.com \
--cc=vulab@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox